Heat Transfer Enhancement for site level indirect heat recovery systems using nanofluids as the intermediate fluid

Abstract In this paper, implementation of nanofluids as a Heat Transfer Enhancement technique in Process Integration has been studied. A step by step flowchart is introduced and as a case study the effect of replacing water with various nanofluids as the heat transfer media in an industrial Heat Recovery Loop (HRL) has been modelled. Nanofluids are prepared by distributing a nanoparticle through a base fluid such as water, ethylene glycol or oils. Suspended nanoparticles slightly affect the thermal and physical properties of the base fluid. Primarily nanoparticles are added to improve the fluid’s heat transfer characteristics by increasing its Reynolds number and thermal conductivity. HRL system in a large dairy factory in New Zealand has been studied as case study. Results show that by applying various HRL design methods and a nanofluid as an intermediate fluid, an increase in heat recovery is possible without the need for extra heat exchanger area and infrastructure. 1.5 vol.% CuO/water nanofluid has been chosen as an intermediate fluid and by using a constant temperature storage control strategy, heat recovery from liquid–liquid heat exchangers increases between 5% and 9%. The air-side heat transfer coefficient limits the impact of using a nanofluid for the air–liquid exchangers. In other cases, the total available duty from the process stream, such as a condenser, significantly nullifies the heat transfer benefit of using a nanofluid in a retrofit situation. Alternative to increasing heat recovery, results show that applying a nanofluid in the HRL design phase enables heat exchanger area to decrease significantly for liquid–liquid matches. Results show that the increase in pressure drop and friction factor effects in such a system is negligible.

[1]  Martin John Atkins,et al.  Options for Solar Thermal and Heat Recovery Loop Hybrid System Design , 2014 .

[2]  Arif Hepbasli,et al.  Heat transfer performance and exergy analyses of a corrugated plate heat exchanger using metal oxide nanofluids , 2014 .

[3]  Jiří Jaromír Klemeš,et al.  Heat Transfer Enhancement for Heat Exchanger Network Retrofit , 2000 .

[4]  M. Khoshvaght-Aliabadi,et al.  Effects of geometrical parameters on performance of plate-fin heat exchanger: Vortex-generator as core surface and nanofluid as working media , 2014 .

[5]  Martin John Atkins,et al.  Integration of Solar Heating Into Heat Recovery Loops Using Constant and Variable Temperature Storage , 2013 .

[6]  Martin John Atkins,et al.  Integration of industrial solar and gaseous waste heat into heat recovery loops using constant and variable temperature storage , 2014 .

[7]  Bengt Sundén,et al.  Effects of hybrid nanofluid mixture in plate heat exchangers , 2016 .

[8]  Somchai Wongwises,et al.  A critical review of convective heat transfer of nanofluids , 2007 .

[9]  Chenglin Chang,et al.  Indirect heat integration across plants using hot water circles , 2015 .

[10]  Angel Huminic,et al.  Application of nanofluids in heat exchangers: A review , 2012 .

[11]  Martin John Atkins,et al.  THE CHALLENGE OF INTEGRATING NON-CONTINUOUS PROCESSES – MILK POWDER PLANT CASE STUDY , 2009 .

[12]  A. Mujumdar,et al.  Heat transfer enhancement by combination of chaotic advection and nanofluids flow in helically coiled tube , 2015 .

[13]  Jiří J. Klemeš,et al.  Handbook of Process Integration (PI) , 2013 .

[14]  Saeed Zeinali Heris,et al.  Heat Transfer Performance of Milk Pasteurization Plate Heat Exchangers Using MWCNT/Water Nanofluid , 2015 .

[15]  Martin John Atkins,et al.  Methods for improving heat exchanger area distribution and storage temperature selection in heat recovery loops , 2013 .

[16]  Martin John Atkins,et al.  Thermocline management of stratified tanks for heat storage , 2009 .

[17]  V. K. Nema,et al.  Experimental analysis of heat transfer and friction factor of nanofluid as a coolant in a corrugated plate heat exchanger , 2012 .

[18]  Igor Bulatov,et al.  Novel optimization method for retrofitting heat exchanger networks with intensified heat transfer , 2011 .

[19]  Jahar Sarkar,et al.  Heat transfer and pressure drop characteristics of CeO2/water nanofluid in plate heat exchanger , 2013 .

[20]  Ian C. Kemp,et al.  Pinch Analysis and Process Integration: A User Guide on Process Integration for the Efficient Use of Energy , 2007 .

[21]  Y. Vermahmoudi,et al.  Parametric study of overall heat transfer coefficient of CuO/water nanofluids in a car radiator , 2013 .

[22]  Martin John Atkins,et al.  Area Targeting and Storage Temperature Selection for Heat Recovery Loops , 2012 .

[23]  Vikas Kumar,et al.  Application of nanofluids in plate heat exchanger: A review , 2015 .

[24]  Igor Bulatov,et al.  Exploiting Tube Inserts to Intensify Heat Transfer for the Retrofit of Heat Exchanger Networks Considering Fouling Mitigation , 2013 .

[25]  Bodo Linnhoff,et al.  Total site targets for fuel, co-generation, emissions, and cooling , 1993 .

[26]  Chenglin Chang,et al.  Efficient Solution Strategy for Stage-wise MINLP Model of Interplant Heat Integration Using Heat Recovery Loop , 2015 .

[27]  Martin John Atkins,et al.  Process integration between individual plants at a large dairy factory by the application of heat recovery loops and transient stream analysis , 2012 .

[28]  M. R. Jafari Nasr,et al.  Fluid flow analysis and extension of rapid design algorithm for helical baffle heat exchangers , 2008 .

[29]  Bengt Sundén,et al.  Aqueous carbon nanotube nanofluids and their thermal performance in a helical heat exchanger , 2016 .

[30]  S. Paras,et al.  INVESTIGATING THE EFFICACY OF NANOFLUIDS AS COOLANTS IN PLATE HEAT EXCHANGERS (PHE) , 2009 .

[31]  Martin John Atkins,et al.  Integration options for solar thermal with low temperature industrial heat recovery loops , 2015 .

[32]  Seyed Hassan Hashemabadi,et al.  Experimental study of overall heat transfer coefficient in the application of dilute nanofluids in the car radiator , 2013 .

[33]  S. M. Peyghambarzadeh,et al.  Experimental study of heat transfer enhancement using water/ethylene glycol based nanofluids as a new coolant for car radiators , 2011 .