Greenhouse Gas Profile of a Plastic Material Derived from a Genetically Modified Plant

Abstract: This article reports an assessment of the global warming potential associated with the life cycle of a biopolymer (poly(hydroxyalkanoate) or PHA) produced in genetically engineered corn developed by Monsanto. The grain corn is harvested in a conventional manner, and the polymer is extracted from the corn stover (i.e., residues such as stalks, leaves and cobs), which would be otherwise left on the field. While corn farming was assessed based on current practice, four different hypothetical PHA production scenarios were tested for the extraction process. Each scenario differed in the energy source used for polymer extraction and compounding, and the results were compared to polyethylene (PE). The first scenario involved burning of the residual biomass (primarily cellulose) remaining after the polymer was extracted from the stover. In the three other scenarios, the use of conventional energy sources of coal, oil, and natural gas were investigated. This study indicates that an integrated system, wherein biomass energy from corn stover provides energy for polymer processing, would result in a better greenhouse gas profile for PHA than for PE. However, plant‐based PHA production using fossil fuel sources provides no greenhouse gas advantage over PE, in fact scoring worse than PE. These results are based on a “cradle‐to‐pellet” modeling as the PHA end‐of‐life was not quantitatively studied due to complex issues surrounding the actual fate of postconsumer PHA.

[1]  Rattan Lal,et al.  Residue management, conservation tillage and soil restoration for mitigating greenhouse effect by CO2-enrichment , 1997 .

[2]  K. Houmiel,et al.  Poly(β-hydroxybutyrate) production in oilseed leukoplasts of Brassica napus , 1999, Planta.

[3]  D. Bassett,et al.  Developments in crystalline polymers , 1982 .

[4]  R. Lal,et al.  Crop residue and tillage effects on carbon sequestration in a Luvisol in central Ohio , 1999 .

[5]  F. Baker,et al.  First Session of WMO–UNEP Intergovernmental Panel on Climate Change (IPCC), held in Geneva, Switzerland, during 9–11 November 1988 , 1989, Environmental Conservation.

[6]  Hans-Jürgen Dr. Klüppel.  Goal and scope definition and life cycle inventory analysis , 1997 .

[7]  Y. Poirier,et al.  Polyhydroxybutyrate, a Biodegradable Thermoplastic, Produced in Transgenic Plants , 1992, Science.

[8]  Hans-Jürgen Dr. Klüppel,et al.  ISO 14041: Environmental management — life cycle assessment — goal and scope definition — inventory analysis , 1998 .

[9]  James A. Duffield,et al.  Estimating the net energy balance of corn ethanol. Agricultural economic report , 1995 .

[10]  Walter Klöpffer,et al.  Life cycle assessment , 1997, Environmental science and pollution research international.

[11]  T. Gerngross,et al.  How green are green plastics? , 2000, Scientific American.

[12]  Wolfgang Seiler,et al.  Factors influencing the loss of fertilizer nitrogen into the atmosphere as N2O , 1983 .

[13]  Y. Poirier,et al.  Targeting of the polyhydroxybutyrate biosynthetic pathway to the plastids of Arabidopsis thaliana results in high levels of polymer accumulation. , 1994, Proceedings of the National Academy of Sciences of the United States of America.

[14]  T. Gerngross,et al.  Can biotechnology move us toward a sustainable society? , 1999, Nature Biotechnology.

[15]  G. Kishore,et al.  Metabolic engineering of Arabidopsis and Brassica for poly(3-hydroxybutyrate-co-3-hydroxyvalerate) copolymer production , 1999, Nature Biotechnology.

[16]  P. Holmes.  Biologically Produced (R)-3-Hydroxy- Alkanoate Polymers and Copolymers , 1988 .