Influence of lanthanum oxide as quality promoter on cathodes for MCFC

Abstract A novel material based on lithium nickel mixed oxides modified by lanthanum impregnation was investigated as an alternative cathode for molten carbonate fuel cells (MCFCs). The electrochemical behaviour of the new cathode material was evaluated in an eutectic mixture of lithium and potassium (Li:K, 62:38) at 650 °C by electrochemical impedance spectroscopy (EIS) as a function of lanthanum content, immersion time and gas composition. The impedance spectra inform on electrode structural changes during the first 100 h. The loss of lithium and the low dissolution of nickel and lanthanum are responsible of these changes. Later on, the structure reaches a stable state. The lanthanum-impregnated cathodes show higher catalytic activity for oxygen reduction and lower dissolution of nickel oxide than the lanthanum-free sample. The cathode material having 0.3 wt.% of La 2 O 3 shows the best behaviour. The loss of lithium was confirmed by X-ray diffraction (XRD) and inductive coupled plasma-atomic emission spectroscopy (ICP-AES).

[1]  M. T. Casais,et al.  Modified nickel oxides as cathode materials for MCFC , 2000 .

[2]  M. Carewska,et al.  Development of molten carbonate fuel cell using novel cathode material , 1996 .

[3]  Xiaogang Peng,et al.  Oxidation behavior of a Ni-LaO codeposited film on nickel , 1998 .

[4]  M. Carewska,et al.  Development and characterization of novel cathode materials for molten carbonate fuel cell , 1994 .

[5]  K. Hemmes,et al.  A Comparative Study of NiO ( Li ) , LiFeO2, and LiCoO2 Porous Cathodes for Molten Carbonate Fuel Cells , 1994 .

[6]  F. Yoshiba,et al.  Performance and life of 10-kW molten-carbonate fuel cell stack using Li/K and Li/Na carbonates as the electrolyte , 1998 .

[7]  B. Fang,et al.  A new candidate material for molten carbonate fuel cell cathodes , 2001 .

[8]  Keonkuk Kim,et al.  Properties of a new type of cathode for molten carbonate fuel cells , 1999 .

[9]  A. Lundblad,et al.  Effect of sintering procedures in development of LiCoO2-cathodes for the molten carbonate fuel cell , 2000 .

[10]  L. Plomp,et al.  Polarization Characteristics of Novel Molten Carbonate Fuel Cell Cathodes , 1991 .

[11]  B. Balboul,et al.  Thermal genesis course and characterization of lanthanum oxide , 2001 .

[12]  E. Antolini,et al.  Morphological characteristics of low density and high lithium content LixNi1 − xO cathodes for molten carbonate fuel cells , 1998 .

[13]  Tae-Hoon Lim,et al.  An evaluation of a stabilized NiO cathode for the reduction of NiO dissolution in molten carbonate fuel cells , 1996 .

[14]  M. Cassir,et al.  Technological applications of molten salts: the case of the molten carbonate fuel cell , 1999 .

[15]  J. Selman,et al.  Oxidation-lithiation of nickel, iron and cobalt in contact with molten carbonate , 1999 .

[16]  M. Cassir,et al.  Synthesis by a soft chemistry route and characterization of LixNi1 − xO (0 < x < 0.5) compounds: Behavior in molten carbonates , 2000 .

[17]  B. Fang,et al.  Performance of a novel Ni/Nb cathode material for molten carbonate fuel cells (MCFC) , 2001 .

[18]  M. T. Casais,et al.  Analysis by electrochemical impedance spectroscopy of new MCFC cathode materials , 2000 .

[19]  K. Yusuff,et al.  Doping effects of cerium oxide on Ni/Al2O3 catalysts for methanation , 1999 .

[20]  G. Lindbergh,et al.  Corrosion behaviour of high-chromium ferritic steels in molten carbonate in cathode environment , 2001 .

[21]  Satoshi Ohara,et al.  Properties of NiO cathode coated with lithiated Co and Ni solid solution oxide for MCFCs , 2000 .