Cyclic production of biocompatible few-layer graphene ink with in-line shear-mixing for inkjet-printed electrodes and Li-ion energy storage

[1]  G. Wallace,et al.  Simultaneous Anodic and Cathodic Exfoliation of Graphite Electrodes in an Aqueous Solution of Inorganic Salt , 2021, ChemElectroChem.

[2]  M. Lanza,et al.  Inkjet Printed Circuits with 2D Semiconductor Inks for High‐Performance Electronics , 2021, Advanced Electronic Materials.

[3]  Pei Lay Yap,et al.  Unlocking thermogravimetric analysis (TGA) in the fight against “Fake graphene” materials , 2021, Carbon.

[4]  J. Coleman,et al.  Liquid Exfoliated SnP3 Nanosheets for Very High Areal Capacity Lithium‐Ion Batteries , 2020, Advanced Energy Materials.

[5]  Dongxue Han,et al.  Electrochemical exfoliation of graphene as an anode material for ultra-long cycle lithium ion batteries , 2020, Journal of Physics and Chemistry of Solids.

[6]  A. P. Santos,et al.  A semi-automated general statistical treatment of graphene systems , 2020, 2D Materials.

[7]  J. Coleman,et al.  Quantifying the Effect of Electronic Conductivity on the Rate Performance of Nanocomposite Battery Electrodes , 2019, ACS Applied Energy Materials.

[8]  Jaewoo Shim,et al.  Path towards graphene commercialization from lab to market , 2019, Nature Nanotechnology.

[9]  T. Barkan,et al.  Graphene: the hype versus commercial reality , 2019, Nature Nanotechnology.

[10]  S. Mansour,et al.  XPS and structural studies of high quality graphene oxide and reduced graphene oxide prepared by different chemical oxidation methods , 2019, Ceramics International.

[11]  J. Coleman,et al.  High areal capacity battery electrodes enabled by segregated nanotube networks , 2019, Nature Energy.

[12]  J. Coleman,et al.  Equipartition of Energy Defines the Size-Thickness Relationship in Liquid-Exfoliated Nanosheets. , 2019, ACS nano.

[13]  F. Torrisi,et al.  Wearable solid-state capacitors based on two-dimensional material all-textile heterostructures. , 2019, Nanoscale.

[14]  C. Selhuber-Unkel,et al.  Biomimetic Carbon Fiber Systems Engineering: A Modular Design Strategy To Generate Biofunctional Composites from Graphene and Carbon Nanofibers , 2019, ACS applied materials & interfaces.

[15]  F. Torrisi,et al.  Graphene, related two-dimensional crystals and hybrid systems for printed and wearable electronics , 2018, Nano Today.

[16]  N. Rothwell,et al.  Small, Thin Graphene Oxide Is Anti-inflammatory Activating Nuclear Factor Erythroid 2-Related Factor 2 via Metabolic Reprogramming. , 2018, ACS nano.

[17]  Chris E. Jones,et al.  Spray-Coating Thin Films on Three-Dimensional Surfaces for a Semitransparent Capacitive-Touch Device , 2018, ACS applied materials & interfaces.

[18]  Z. Dang,et al.  High-yield production of 2D crystals by wet-jet milling , 2018, 1804.10688.

[19]  Kostas Kostarelos,et al.  Live Imaging of Label-Free Graphene Oxide Reveals Critical Factors Causing Oxidative-Stress-Mediated Cellular Responses. , 2017, ACS nano.

[20]  R. Sordan,et al.  Fully inkjet-printed two-dimensional material field-effect heterojunctions for wearable and textile electronics , 2017, Nature Communications.

[21]  R. Young,et al.  Mechanical properties of graphene and graphene-based nanocomposites , 2017 .

[22]  Leonardo Viti,et al.  Terahertz saturable absorbers from liquid phase exfoliation of graphite , 2017, Nature Communications.

[23]  Woo Jin Hyun,et al.  Scalable, Self‐Aligned Printing of Flexible Graphene Micro‐Supercapacitors , 2017 .

[24]  W. M. Griffin,et al.  Greenhouse gas mitigation for U.S. plastics production: energy first, feedstocks later , 2017 .

[25]  Huafeng Yang,et al.  Water-based and biocompatible 2D crystal inks for all-inkjet-printed heterostructures. , 2017, Nature nanotechnology.

[26]  Duncan N. Johnstone,et al.  Microfluidization of Graphite and Formulation of Graphene-Based Conductive Inks , 2016, ACS nano.

[27]  M. Spasenović.  Graphene Market Review , 2016 .

[28]  Anders Hagfeldt,et al.  Not All That Glitters Is Gold: Metal-Migration-Induced Degradation in Perovskite Solar Cells. , 2016, ACS nano.

[29]  Hailong Liu,et al.  Effectiveness of the Young-Laplace equation at nanoscale , 2016, Scientific Reports.

[30]  G. Botte,et al.  Recycling of graphite anodes for the next generation of lithium ion batteries , 2016, Journal of Applied Electrochemistry.

[31]  J. Tascón,et al.  Electrolytic exfoliation of graphite in water with multifunctional electrolytes: en route towards high quality, oxide-free graphene flakes. , 2016, Nanoscale.

[32]  P. Joseph,et al.  Production of reduced graphene oxide via hydrothermal reduction in an aqueous sulphuric acid suspension and its electrochemical behaviour , 2015, Journal of Solid State Electrochemistry.

[33]  Teerakiat Kerdcharoen,et al.  Low-cost and flexible printed graphene–PEDOT:PSS gas sensor for ammonia detection , 2014 .

[34]  Yaping Zhao,et al.  Inkjet Printing Patterns of Highly Conductive Pristine Graphene on Flexible Substrates , 2014 .

[35]  S. Bohm,et al.  Graphene against corrosion , 2014 .

[36]  G. Lacconi,et al.  On the Nature of Defects in Liquid-Phase Exfoliated Graphene , 2014, 1409.1548.

[37]  Thomas M. Higgins,et al.  Scalable production of large quantities of defect-free few-layer graphene by shear exfoliation in liquids. , 2014, Nature materials.

[38]  N. Pugno,et al.  Fragmentation and exfoliation of 2-dimensional materials: a statistical approach. , 2014, Nanoscale.

[39]  K. Müllen,et al.  Exfoliation of graphite into graphene in aqueous solutions of inorganic salts. , 2014, Journal of the American Chemical Society.

[40]  Juanxia Wu,et al.  Raman spectroscopy of graphene , 2014 .

[41]  David J. Finn,et al.  Inkjet deposition of liquid-exfoliated graphene and MoS2 nanosheets for printed device applications , 2014 .

[42]  D. Losic,et al.  Graphene and graphene oxide as new nanocarriers for drug delivery applications. , 2013, Acta biomaterialia.

[43]  Manos M. Tentzeris,et al.  Inkjet-printed antennas, sensors and circuits on paper substrate , 2013 .

[44]  S. Khondaker,et al.  Oxygenated Functional Group Density on Graphene Oxide: Its Effect on Cell Toxicity , 2013 .

[45]  A. Ferrari,et al.  Production and processing of graphene and 2d crystals , 2012 .

[46]  J. Zunino,et al.  Temperature-dependent electrical properties of graphene inkjet-printed on flexible materials. , 2012, Langmuir : the ACS journal of surfaces and colloids.

[47]  Ching-Ping Wong,et al.  Large-scale production of two-dimensional nanosheets , 2012 .

[48]  A. Ferrari,et al.  Inkjet-printed graphene electronics. , 2011, ACS nano.

[49]  F. Stavale,et al.  Quantifying defects in graphene via Raman spectroscopy at different excitation energies. , 2011, Nano letters.

[50]  Yongsheng Chen,et al.  Graphene-based conducting inks for direct inkjet printing of flexible conductive patterns and their applications in electric circuits and chemical sensors , 2011 .

[51]  S. Magdassi,et al.  Copper Nanoparticles for Printed Electronics: Routes Towards Achieving Oxidation Stability , 2010, Materials.

[52]  Haihui Wang,et al.  Large reversible capacity of high quality graphene sheets as an anode material for lithium-ion batteries , 2010 .

[53]  J. Coleman,et al.  High-concentration solvent exfoliation of graphene. , 2010, Small.

[54]  Gaetano Granozzi,et al.  Evolution of Electrical, Chemical, and Structural Properties of Transparent and Conducting Chemically Derived Graphene Thin Films , 2009 .

[55]  K. Novoselov,et al.  Raman spectroscopy of graphene edges. , 2008, Nano letters.

[56]  J. Coleman,et al.  Liquid phase production of graphene by exfoliation of graphite in surfactant/water solutions , 2008, 0809.2690.

[57]  H. Karlsson,et al.  Copper oxide nanoparticles are highly toxic: a comparison between metal oxide nanoparticles and carbon nanotubes. , 2008, Chemical research in toxicology.

[58]  Jin-Song Hu,et al.  Nanostructured Materials for Electrochemical Energy Conversion and Storage Devices , 2008 .

[59]  J. Coleman,et al.  High-yield production of graphene by liquid-phase exfoliation of graphite. , 2008, Nature nanotechnology.

[60]  Andre K. Geim,et al.  Raman spectrum of graphene and graphene layers. , 2006, Physical review letters.

[61]  A. Ferrari,et al.  Diamond-like carbon for magnetic storage disks , 2004 .

[62]  Haoshen Zhou,et al.  Lithium Storage in Ordered Mesoporous Carbon (CMK‐3) with High Reversible Specific Energy Capacity and Good Cycling Performance , 2003 .

[63]  John Robertson,et al.  Interpretation of infrared and Raman spectra of amorphous carbon nitrides , 2003 .

[64]  John Robertson,et al.  Resonant Raman spectroscopy of disordered, amorphous, and diamondlike carbon , 2001 .

[65]  D. Aurbach.  Review of selected electrode–solution interactions which determine the performance of Li and Li ion batteries , 2000 .

[66]  J. Robertson,et al.  Interpretation of Raman spectra of disordered and amorphous carbon , 2000 .

[67]  J. Dahn,et al.  Study of Irreversible Capacities for Li Insertion in Hard and Graphitic Carbons , 1997 .

[68]  D. Aurbach,et al.  The mechanism of lithium intercalation in graphite film electrodes in aprotic media. Part 1. High resolution slow scan rate cyclic voltammetric studies and modeling , 1997 .

[69]  P. Kwiatek,et al.  Carbon aromaticity based on XPS II to II∗ signal intensity , 1993 .

[70]  J. Brady,et al.  The rheology of Brownian suspensions , 1989 .

[71]  F. Tuinstra,et al.  Raman Spectrum of Graphite , 1970 .

[72]  M. McCarthy.  The statistical approach , 1959 .

[73]  W. S. Hummers,et al.  Preparation of Graphitic Oxide , 1958 .

[74]  G. Sotzing,et al.  Preparation of conductive graphene/graphite infused fabrics using an interface trapping method , 2015 .

[75]  Yuehuan Yuan,et al.  Contact Angle and Wetting Properties , 2013 .