Structural diversity and orientation dependence of a liquid-fed passive air-breathing direct methanol fuel cell

Abstract This paper investigates the interesting effects of structural diversity and operating orientation on the performance of a liquid-fed passive air-breathing direct methanol fuel cell (PAB-DMFC). The results indicate that a higher thickness of the GEFC®-10N membrane helps enhance the cell performance due to its ability in reducing methanol crossover (MCO). When the cell uses carbon cloth at the anode but carbon paper at the cathode as the diffusion media, it produces higher performances than other combinations. The work also confirms the merit of using a cathode diffusion layer since it improves water, methanol and heat management. As for the structural optimization of current collector, it is recommended to use the circular-hole-array pattern with a lower open ratio at the anode but the parallel-fence pattern with a higher open ratio at the cathode. It is further demonstrated that the vertical operation yields a higher cell performance at a lower methanol concentration while the horizontal operation performs better at a higher methanol concentration. Besides, the effects of opening pattern and working orientation on the CO2 evolvement behaviors are analyzed by using visualized methods. Detailed mechanisms related to the resultant phenomena are comprehensively provided in this work.

[1]  Jing Yi Chang,et al.  Characterization of a direct methanol fuel cell using Hilbert curve fractal current collectors , 2009 .

[2]  Fuqiang Liu,et al.  Water Transport Through Nafion 112 Membrane in DMFCs , 2005 .

[3]  Yean-Der Kuan,et al.  Experimental investigation of the effect of free openings of current collectors on a direct methanol fuel cell , 2011 .

[4]  Chaoyang Wang,et al.  Water and methanol crossover in direct methanol fuel cells-Effect of anode diffusion media , 2008 .

[5]  Chao-Yang Wang,et al.  Electrochemical and flow characterization of a direct methanol fuel cell , 2004 .

[6]  Mohammad Ali Abdelkareem,et al.  Vertical operation of passive direct methanol fuel cell employing a porous carbon plate , 2010 .

[7]  Keith Scott,et al.  Development of direct methanol alkaline fuel cells using anion exchange membranes , 2004 .

[8]  P. Ivanov,et al.  Influence of current collectors design on the performance of a silicon-based passive micro direct methanol fuel cell , 2009 .

[9]  Effect of the porous carbon layer in the cathode gas diffusion media on direct methanol fuel cell performances , 2009 .

[10]  Fuqiang Liu,et al.  Low Crossover of Methanol and Water Through Thin Membranes in Direct Methanol Fuel Cells , 2006 .

[11]  A. Faghri,et al.  Mass transport analysis of a passive vapor-feed direct methanol fuel cell , 2010 .

[12]  A. Faghri,et al.  Effect of the cathode open ratios on the water management of a passive vapor-feed direct methanol fu , 2011 .

[13]  Alexandra M.F.R. Pinto,et al.  Water management in direct methanol fuel cells , 2008 .

[14]  Wei Yuan,et al.  Effects of structural aspects on the performance of a passive air-breathing direct methanol fuel cell , 2010 .

[15]  T. Zhao,et al.  Effect of Transient Hydrogen Evolution∕Oxidation Reactions on the OCV of Direct Methanol Fuel Cells , 2005 .

[16]  Jenn-Jiang Hwang,et al.  Effect of breathing-hole size on the electrochemical species in a free-breathing cathode of a DMFC , 2006 .

[17]  Chao-Yang Wang,et al.  An In Situ Method for Determination of Current Distribution in PEM Fuel Cells Applied to a Direct Methanol Fuel Cell , 2003 .

[18]  Rong Chen,et al.  Small direct methanol fuel cells with passive supply of reactants , 2009 .

[19]  Youngchul Park,et al.  Design of a MEA with multi-layer electrodes for high concentration methanol DMFCs , 2012 .

[20]  Ya-Ling He,et al.  Effect of cathode gas diffusion layer on water transport and cell performance in direct methanol fuel cells , 2007 .

[21]  Amir Faghri,et al.  Methanol and water crossover in a passive liquid-feed direct methanol fuel cell , 2010 .

[22]  Siti Kartom Kamarudin,et al.  Overview on the application of direct methanol fuel cell (DMFC) for portable electronic devices , 2009 .

[23]  Kaspar Andreas Friedrich,et al.  Performance and methanol permeation of direct methanol fuel cells: dependence on operating conditions and on electrode structure , 2004 .

[24]  Wei Yuan,et al.  Dominance evaluation of structural factors in a passive air-breathing direct methanol fuel cell based on orthogonal array analysis , 2011 .

[25]  Amir Faghri,et al.  Water management of the DMFC passively fed with a high-concentration methanol solution , 2010 .

[26]  Wenming Yang,et al.  Effect of current-collector structure on performance of passive micro direct methanol fuel cell , 2007 .

[27]  Y. H. Pan.  Advanced air-breathing direct methanol fuel cells for portable applications , 2006 .

[28]  Yean-Der Kuan,et al.  Characterization of a liquid feed direct methanol fuel cell with Sierpinski carpets fractal current collectors , 2008 .

[29]  Jun Shen,et al.  Architecture for portable direct liquid fuel cells , 2006 .

[30]  Inseob Song,et al.  Mass balance research for high electrochemical performance direct methanol fuel cells with reduced methanol crossover at various operating conditions , 2008 .

[31]  Hae-Kyoung Kim,et al.  Passive direct methanol fuel cells fed with methanol vapor , 2006 .

[32]  M. Aulice Scibioh,et al.  On the consequences of methanol crossover in passive air-breathing direct methanol fuel cells , 2005 .

[33]  Rong Chen,et al.  Effect of cell orientation on the performance of passive direct methanol fuel cells , 2006 .