Fretting corrosion of lubricated tin plated copper alloy contacts: Effect of temperature
暂无分享,去创建一个
[1] Siegfried Fouvry,et al. The fretting sliding transition as a criterion for electrical contact performance , 2001 .
[2] T. Hammam,et al. Tin coating techniques for copper-base alloys-the effects on friction, wear and electric properties , 1997, Electrical Contacts - 1997 Proceedings of the Forty-Third IEEE Holm Conference on Electrical Contacts.
[3] J. Dahn,et al. Single Bath, Pulsed Electrodeposition of Copper-Tin Alloy Negative Electrodes for Lithium-ion Batteries , 2003 .
[4] T. Hammam,et al. The impact of sliding motion and current load on the deterioration of tin-coated contact terminals , 2000 .
[5] C. T. Wei,et al. Effect of intermetallic compound formation on electrical properties of Cu/Sn interface during thermal treatment , 2004 .
[6] M. Antler. Sliding Studies of New Connector Contact Lubricants , 1987 .
[7] J. Mottine,et al. The Effect of Lubrication on Fretting Corrosion at Dissimilar Metal Interfaces in Socketed IC Device Applications , 1985 .
[8] Paul G. Slade,et al. Electrical contacts : principles and applications , 1999 .
[9] N. Aukland,et al. The effect of fretting at elevated temperatures on a clad material (65Au21Pd14Ag) and an electroplated soft gold over palladium-nickel material system , 2000 .
[10] R.D. Malucci,et al. Characteristics of films developed in fretting experiments on tin plated contacts , 1999, Electrical Contacts - 1999. Proceedings of the Forty-Fifth IEEE Holm Conference on Electrical Contacts (Cat. No.99CB36343).
[11] S. Sen,et al. A study of intermetallic compound formation in a copper–tin bimetallic couple , 1990 .
[12] R.D. Malucci,et al. Vibration thresholds for fretting corrosion in electrical connectors , 2002, IEEE Transactions on Components and Packaging Technologies.
[13] P. van Dijk,et al. Solutions for fretting corrosion , 1999 .
[14] M. Antler,et al. Electrical effects of fretting connector contact materials: A review , 1985 .
[15] M. Hansen,et al. Constitution of Binary Alloys , 1958 .
[16] J. A. Tilton. An investigation to locate and correct errors in the card file prepared by the Joint Committee on Powder Diffraction Standards (JCPDS) , 1982 .
[17] R. S. Mroczkowski,et al. A limited study of the effects of contact normal force, contact geometry and wipe distance on contact resistance of gold-plated contacts , 1988, 38th Electronics Components Conference 1988., Proceedings..
[18] Field and laboratory studies of corrosion inhibiting lubricants for gold-plated connectors , 1996, Electrical Contacts - 1996. Proceedings of the Forty-Second IEEE Holm Conference on Electrical Contacts. Joint with the 18th International Conference on Electrical Contacts.
[19] J. Dahn,et al. Single-Bath Electrodeposition of a Combinatorial Library of Binary Cu1 − x Sn x Alloys , 2003 .
[20] A. Lee,et al. Fretting corrosion of Tin-plated copper alloy , 1987 .
[21] David Turnbull,et al. Interstitial Diffusion of Copper in Tin , 1967 .
[22] Jonathan Swingler. The automotive connector: The influence of powering and lubricating a fretting contact interface , 2000 .
[23] M. Braunovic,et al. Overheating of flexible tinned copper connectors , 2000, Electrical Contacts - 2000. Proceedings of the Forty-Sixth IEEE Holm Conference on Electrical Contacts (Cat. No.00CB37081).
[24] K. Paik,et al. Effects of Cu/Al intermetallic compound (IMC) on copper wire and aluminum pad bondability , 2003 .
[25] M. Antler. Electronic Connector Contact Lubricants: The Polyether Fluids , 1987 .
[26] The lubrication of gold , 1963 .
[27] M. Braunovic,et al. Intermetallic compounds at aluminum-to-copper electrical interfaces: effect of temperature and electric current , 1994 .
[28] J. Haimovich. Cu-Sn Intermetallic Compound Growth in Hot-Air-Leveled Tin at and below 100°C , 1993 .
[29] J.W. McBride,et al. The degradation of road tested automotive connectors , 1999, Electrical Contacts - 1999. Proceedings of the Forty-Fifth IEEE Holm Conference on Electrical Contacts (Cat. No.99CB36343).
[31] M. Suh,et al. The formation of Cu-Sn intermetallic compound and its effect on the fracture behavior of 80Sn-20Pb electrodeposits on Cu-based leadframe alloy , 1996 .
[32] J. Zhang,et al. Electric contact behavior of Cu-Sn intermetallic compound formed in tin platings , 1998, Electrical Contacts - 1998. Proceedings of the Forty-Fourth IEEE Holm Conference on Electrical Contacts (Cat. No.98CB36238).
[33] M. Antler. Corrosion control and lubrication of plated noble metal connector contacts , 1995, Electrical Contacts - 1995. Proceedings of the Forty-First IEEE Holm Conference on Electrical Contacts.
[35] S.L. McCarthy,et al. High cycle fretting corrosion studies on tin-coated contact materials , 2001, Proceedings of the Forth-Seventh IEEE Holm Conference on Electrical Contacts (IEEE Cat. No.01CH37192).
[36] A. Lee,et al. Fretting corrosion of tin at elevated temperatures , 1988, Electrical Contacts, 1988., Proceedings of the Thirty Fourth Meeting of the IEEE Holm Conference on Electrical Contacts.
[37] D. Alamarguy,et al. Lubrication mechanisms of hot-dipped tin separable electrical contacts , 2001, Proceedings of the Forth-Seventh IEEE Holm Conference on Electrical Contacts (IEEE Cat. No.01CH37192).
[38] K. Tu. Cu/Sn interfacial reactions: thin-film case versus bulk case , 1996 .
[39] R.D. Malucci,et al. Impact of fretting parameters on contact degradation , 1996, Electrical Contacts - 1996. Proceedings of the Forty-Second IEEE Holm Conference on Electrical Contacts. Joint with the 18th International Conference on Electrical Contacts.
[40] C. Leung,et al. Thermal cycling induced wiping wear of connector contacts at 150/spl deg/C , 1997, Electrical Contacts - 1997 Proceedings of the Forty-Third IEEE Holm Conference on Electrical Contacts.
[41] R. D. Malucci. Multispot model of contacts based on surface features , 1990, Thirty-Sixth IEEE Conference on Electrical Contacts, and the Fifteenth International Conference on Electrical Contacts.
[42] W. Freitag. Lubricants for Separable Connectors , 1977 .