PERFORMANCE IMPROVEMENTS OF ALKALINE BATTERIES BY STUDYING THE EFFECTS OF DIFFERENT KINDS OF SURFACTANT AND DIFFERENT DERIVATIVES OF BENZENE ON THE ELECTROCHEMICAL PROPERTIES OF ELECTROLYTIC ZINC

Abstract Electrolytic zinc powders were prepared in 12 M KOH, 4 wt.% zinc oxide solutions in the presence of different kinds of surfactant and organic additives using the galvanostatic technique. Then the electrochemical behavior of zinc was investigated using the sweep voltametry technique. Zinc samples electrolyzed in the presence of cationic cetyl trimethyl ammonium bromide (Zn-CTAB), have maximum corrosion rate. Furthermore, scanning electron microscopy revealed the highest surface area. Zinc deposited with anionic surfactants, sodium dodecyl benzene sulfonate (SDBS) and sodium dodecyl sulfate (SDS), have high dendritic and secondary growth. More zinc ions electrolyzed on the cathode electrode in the presence of SDBS compared with SDS. We suppose the Benzene molecule in SDBS changes morphology, thus effects of the benzene molecule is investigated by utilizing several organic compounds during zinc electrodeposition. Naphthalene with 10 pi electrons at two fused rings decreases corrosion rate and needle growth of zinc deposited, compared to benzyl chloride which has 6 pi electrons. Enhanced delocalization of pi electrons by strongly activating group (–NH2) in the aniline molecule increases the corrosion rate and dendrites compared with benzyl chloride, which has the weakly activating group (–CH2Cl). The addition of chloro benzene with inactivating and electrodrawing group (–Cl) creates high surface area without any dendritic growth. The effects of electrolyte additives on the electrochemical capacity of AA-sized alkaline Zn-MnO2 batteries are verified. The addition of Triton X-100 in anode gel resulted in maximum electrical capacity. Anionic (SDBS and SDS) additives gave higher electrical capacity than cationic (CTAB). Also, the reaction mechanism for zinc electrodeposition in alkaline electrolytes and its dependence upon the presence of organic additives are discussed in detail.

[1]  Hans-Jürgen Butt,et al.  Physics and Chemistry of Interfaces , 2003 .

[2]  Chun-Chen Yang,et al.  Improvement of high-rate capability of alkaline Zn–MnO2 battery , 2002 .

[3]  F. Will,et al.  Parametric Study of Zinc Deposition on Porous Carbon in a Flowing Electrolyte Cell , 1985 .

[4]  K. Kordesch,et al.  A study of rechargeable zinc electrodes for alkaline cells requiring anodic limitation , 1981 .

[5]  Yuliang Cao,et al.  Improved discharge capacity and suppressed surface passivation of zinc anode in dilute alkaline solution using surfactant additives , 2004 .

[6]  Bernard Agruss,et al.  Power Sources 6 , 1978 .

[7]  S. Barnartt.  Primary Current Distribution Around Capillary Tips Used in the Measurement of Electrolytic Polarization , 1952 .

[8]  A. Damjanović,et al.  The Electrocrystallization of Zinc Dendrites in High‐Purity, and Inhibitor Doped, Alkaline Zincate Solutions , 1970 .

[9]  C. H. Rochester,et al.  Adsorption from solution at the solid/liquid interface , 1983 .

[10]  T. Sinclair,et al.  Effect of additives on the corrosion of zinc in koh solution , 1981 .

[11]  G. P. Kalaignan,et al.  Studies with porous zinc electrodes with additives for secondary alkaline batteries , 1998 .

[12]  T. P. Dirkse.  The Behavior of the Zinc Electrode in Alkaline Solutions II . Reaction Orders at the Equilibrium Potential , 1979 .

[13]  Anne Lohrli.  Chapman and Hall , 1985 .

[14]  C. Breslin,et al.  Photo-induced dissolution of zinc in alkaline solutions , 2000 .

[15]  A. Despić,et al.  Kinetics and mechanism of deposition of zinc from zincate in concentrated alkali hydroxide solutions , 1976 .

[16]  B. Beden,et al.  Effect of the surfactant “forafac” on hydrogen evolution on a zinc electrode , 1990 .

[17]  Yunhong Zhou,et al.  Influence of surfactants on electrochemical behavior of zinc electrodes in alkaline solution , 1998 .

[18]  R. Einerhand,et al.  Zinc Electrode Shape Change I . In Situ Monitoring , 1991 .

[19]  A. Damjanović,et al.  The Inhibition of the Dendritic Electrocrystallization of Zinc from Doped Alkaline Zincate Solutions , 1972 .

[20]  J. Fransaer,et al.  Analysis of the Electrolytic Codeposition of Non‐Brownian Particles with Metals , 1992 .

[21]  P. J. Mitchell,et al.  The electrodeposition of zinc onto graphitic carbon substrates from alkaline electrolytes , 1988 .

[22]  D. Chin,et al.  A‐C Modulation of a Rotating Zinc Electrode in an Acid Zinc‐Chloride Solution , 1981 .

[23]  R. Wiart,et al.  Diffusion controlled inhibition of electrodeposition: impedance measurements , 1979 .

[24]  S. Mu,et al.  Effect of inhibitors on Zn-dendrite formation for zinc-polyaniline secondary battery , 1998 .

[25]  D. J. Mackinnon,et al.  Evaluation of organic additives as levelling agents for zinc electrowinning from chloride electrolytes , 1982 .

[26]  K. Kordesch,et al.  Electrodeposition of zinc using a multi- component pulse current , 1986 .