Experimental studies of the quench behaviour of MgB2 superconducting wires for fault current limiter applications

Various MgB2 wires with different sheath materials provided by Hyper Tech Research Inc., have been tested in the superconducting fault current limiter (SFCL) desktop tester at 24–26 K in a self-field. Samples 1 and 2 are similarly fabricated monofilamentary MgB2 wires with a sheath of CuNi, except that sample 2 is doped with SiC and Mg addition. Sample 3 is a CuNi sheathed multifilamentary wire with Cu stabilization and Mg addition. All the samples with Nb barriers have the same diameter of 0.83 mm and superconducting fractions ranging from 15% to 27% of the total cross section. They were heat-treated at temperatures of 700 °C for a hold time of 20–40 min. Current limiting properties of MgB2 wires subjected to pulse overcurrents have been experimentally investigated in an AC environment in the self-field at 50 Hz. The quench currents extracted from the pulse measurements were in a range of 200–328 A for different samples, corresponding to an average engineering critical current density (Je) of around 4.8 × 104 A cm−2 at 25 K in the self-field, based on the 1 µV cm−1 criterion. This work is intended to compare the quench behaviour in the Nb-barrier monofilamentary and multifilamentary MgB2 wires with CuNi and Cu/CuNi sheaths. The experimental results can be applied to the design of fault current limiter applications based on MgB2 wires.

[1]  Approach for the fabrication of MgB2 superconducting tape with large in-field transport critical current density , 2002, cond-mat/0203113.

[2]  H. Matsui,et al.  The origin of multiple superconducting gaps in MgB2 , 2003, Nature.

[3]  R. V. Dover,et al.  High critical currents in iron-clad superconducting MgB2 wires , 2001, Nature.

[4]  M. Tomsic,et al.  Transport properties of multifilamentary, in situ route, Cu-stabilized MgB2 strands: one metre segments and the Jc(B,T) dependence of short samples , 2006 .

[5]  Liangzhen Lin,et al.  Application studies of superconducting fault current limiters in electric power systems , 2002 .

[6]  Improvement of critical current density in the Cu/MgB2 and Ag/MgB2 superconducting wires using the fast formation method , 2002, cond-mat/0201261.

[7]  M. Husband,et al.  ${\rm MgB}_{2}$ Sample Tests for Possible Applications of Superconducting Fault Current Limiters , 2007, IEEE Transactions on Applied Superconductivity.

[8]  S. Dou,et al.  Improvement of critical current in MgB2/Fe superconducting wires by a ferromagnetic sheath , 2001, cond-mat/0109283.

[9]  M. Tomsic,et al.  Development of magnesium diboride (MgB2) wires and magnets using in situ strand fabrication method , 2007 .

[10]  Large transport critical currents in dense Fe- and Ni-clad MgB2 superconducting tapes , 2001, cond-mat/0106341.

[11]  M. Bocchi,et al.  Test Results on 500 kVA-Class ${\rm MgB}_{2}$-Based Fault Current Limiter Prototypes , 2007, IEEE Transactions on Applied Superconductivity.

[12]  High transport currents in mechanically reinforced MgB2 wires , 2001, cond-mat/0106226.

[13]  M. Tomsic,et al.  Multifilamentary, in situ route, Cu-stabilized MgB2 strands , 2004, cond-mat/0409280.

[14]  K. Salama,et al.  High critical current of Cu-sheathed MgB/sub 2/ wire at 20 K , 2005, IEEE Transactions on Applied Superconductivity.

[15]  S. Dou,et al.  RAPID COMMUNICATION: Significant improvement of critical current density in coated MgB2/Cu short tapes through nano-SiC doping and short-time in situ reaction , 2004 .

[16]  H. Fujii,et al.  High transport critical current density obtained for powder-in-tube-processed MgB2 tapes and wires using stainless steel and Cu–Ni tubes , 2001 .

[17]  T. Melíšek,et al.  MgB2 composite wires with Fe, Nb and Ta sheaths , 2006 .

[18]  K. Salama,et al.  High I/sub c/ in iron-clad MgB/sub 2/ tape , 2003 .

[19]  H. Suo,et al.  Superconducting properties of MgB2 tapes and wires , 2003 .

[20]  J. Nagamatsu,et al.  Superconductivity at 39 K in magnesium diboride , 2001, Nature.

[21]  H. Suo,et al.  High transport critical currents in dense monofilamentary Fe- and Ni-clad MgB/sub 2/ tapes and MgB/sub 2//Fe wires with 7 filaments , 2002 .

[22]  M. Tomsic,et al.  Influence of heat-treatment schedules on the transport current densities of long and short segments of superconducting MgB2 wire , 2004 .

[23]  S. Dou,et al.  Continuous- and batch-processed MgB2/Fe strands––transport and magnetic properties , 2003 .

[24]  A. Malagoli,et al.  Transport properties of powder-in-tube processed MgB2 tapes , 2002 .

[25]  S. Farinon,et al.  The behaviour of cryogen-free MgB2 react and wind coils , 2006 .

[26]  Large transport critical currents in unsintered MgB2 superconducting tapes , 2001, cond-mat/0103563.

[27]  G. Volpini,et al.  Fabrication and properties of monofilamentary MgB2 superconducting tapes , 2003 .

[28]  H. Suo,et al.  Improved transport critical current and irreversibility fields in mono- and multifilamentary Fe/MgB2 tapes and wires using fine powders , 2003 .

[29]  Very fast formation of superconducting MgB2/Fe wires with high Jc , 2001, cond-mat/0106148.

[30]  M. Majoros,et al.  Investigations of current limiting properties of the MgB2 wires subjected to pulse overcurrents in the benchtop tester , 2007 .

[31]  P. Grant.  Potential Electric Power Applications for Magnesium Diboride , 2001 .