Finite element simulation of buckling-induced failure of carbon fibre-reinforced laminated composite panels embedded with damage zones

Abstract This work is concerned with the buckling-induced failure prediction of aerospace grade carbon fibre-reinforced laminated composite panels embedded with pre-assumed damage. Fibrous composites are being broadly used in aircraft and aerospace vehicle components. However, a major drawback in widespread use is their susceptibility to drop tool impacts and ground equipment collisions. Such incidents could inflict invisible internal damage and delamination that divides laminate into sub-laminates of lower bending stiffness/resistance to buckling load that might result in catastrophic consequences during later operations. This situation is a major concern for aircraft/aerospace industry and necessitates thorough understanding of damage tolerance capabilities of structural members for safety of human lives and structural assets. Extensive studies, based on experimental testing, were conducted on the topic. Since physical testing consumes time and resources, generate limited data, and lack in ply level effect of mixed-modes buckling hence development of a computational model is required. The present study consists of simulation models developed using ABAQUS ™ software. Impact-induced damage was introduced as an area of reduced stiffness (soft-inclusion) or hole. Overall damage zones of known size and shape were inserted at various locations in the volumes of various laminates to predict critical buckling load based on global and local buckling with emphasis on mixed-mode buckling. Simulated cases of single and multiple damage zones/holes, switching and coupling of local–global buckling modes were investigated. Damage size, location, type, and penetration depth against critical buckling load and mode shape were investigated. The critical buckling load is found to correlate well corresponding to soft-inclusions to predict ply-level failure. Selected results of eight-, sixteen, and twenty-four ply laminates were compared against the data available in the literature and found to be in agreement up to 90%. The model could also be useful to efficiently study various lay-ups, loading, and material properties for the similar cases.

[1]  Neil Baker,et al.  Techniques for optimisation and analysis of composite structures for damage tolerance and buckling stiffness , 2012 .

[2]  A. Yapici,et al.  Effect of Low Velocity Impact Damage on Buckling Properties , 2009 .

[3]  Z. Gürdal,et al.  BUCKLING AND POSTBUCKLING OF CIRCULAR PLATES CONTAINING CONCENTRIC PENNY-SHAPED DELAMINATIONS , 1995 .

[4]  Shun-Fa Hwang,et al.  Buckling behavior of composite laminates with multiple delaminations under uniaxial compression , 2001 .

[5]  M. Pavier,et al.  The effect of delamination geometry on the compressive failure of composite laminates , 2001 .

[6]  D. Hull,et al.  Damage mechanism characterization in composite damage tolerance investigations , 1993 .

[7]  R. Thomson,et al.  The influence of impactor shape on the damage to composite laminates , 2006 .

[8]  C. Bisagni,et al.  Single-mode solution for post-buckling analysis of composite panels with elastic restraints loaded in compression , 2012 .

[9]  John Morton,et al.  An assessment of the impact performance of CFRP reinforced with high-strain carbon fibres , 1986 .

[10]  Shou-wen Yu,et al.  The growth simulation of circular buckling-driven delamination , 1999 .

[11]  Murray L. Scott,et al.  Review of delamination predictive methods for low speed impact of composite laminates , 2004 .

[12]  Meng-Kao Yeh,et al.  Buckling of Elliptically Delaminated Composite Plates , 1994 .

[13]  Peter Myler,et al.  Ply level failure prediction of carbon fibre reinforced laminated composite panels subjected to low velocity drop-weight impact using adaptive meshing techniques , 2014 .

[14]  Peter Myler,et al.  Efficient computational modelling of carbon fibre reinforced laminated composite panels subjected to low velocity drop-weight impact , 2014 .

[15]  Izhak Sheinman,et al.  Buckling of Multiply Delaminated Beams , 1994 .

[16]  T. Özben.  Analysis of critical buckling load of laminated composites plate with different boundary conditions using FEM and analytical methods , 2009 .

[17]  Rodney S. Thomson,et al.  The effect of impactor shape on the impact response of composite laminates , 2005 .

[18]  Flat nose low velocity drop-weight impact response of carbon fibre composites using non-destructive damage detection techniques , 2015 .

[19]  Umar Farooq.  Finite element simulation of flat nose low velocity impact behaviour of carbon fibre composite laminates , 2014 .

[20]  Zafer Gürdal,et al.  Layer-wise approach for the bifurcation problem in laminated composites with delaminations , 1992 .

[21]  C. D. Babcock,et al.  Two-Dimensional Modelling of Compressive Failure in Delaminated Laminates , 1985 .

[22]  Brian Falzon,et al.  Capturing mode-switching in postbuckling composite panels using a modified explicit procedure , 2003 .

[23]  Aniello Riccio,et al.  Embedded delamination growth in composite panels under compressive load , 2001 .

[24]  Paul J. Hogg,et al.  The role of reinforcement architecture on impact damage mechanisms and post-impact compression behaviour , 1996, Journal of Materials Science.

[25]  Daining Fang,et al.  Uniaxial local buckling strength of periodic lattice composites , 2009 .

[26]  Leif Asp,et al.  Delamination buckling and growth for delaminations at different depths in a slender composite panel , 2001 .

[27]  A. Baltacı,et al.  Buckling Characteristics of Symmetrically and Antisymmetrically Laminated Composite Plates with Central Cutout , 2007 .

[28]  Dongquan Liu,et al.  Microbuckle initiation from a patch of large amplitude fibre waviness in a composite under compression and bending , 2001 .

[29]  Fu-Kuo Chang,et al.  Composite panels containing multiple through-the-width delaminations and subjected to compression. Part I: Analysis , 1995 .

[30]  Nikolaos Kontis.  Damage tolerance of composite stiffened structures , 2008 .