Mechanical response of adhesive and hybrid joints containing novel additive manufacturing adherends

[1]  The Influence of the Use of Fasteners with Different Stiffness in Hybrid Joints Subjected to Complex Mechanical Loads , 2023, Archives of Metallurgy and Materials.

[2]  P. Lacki,et al.  Examinations of steel overlap joints obtained using the friction stir welding technology , 2023, Archives of Metallurgy and Materials.

[3]  T. Reinicke,et al.  Effects of steps on the load bearing capacity of 3D-printed single lap joints , 2023, Journal of Materials Research and Technology.

[4]  M. Nowicki,et al.  Experimental Study of Single-Lap, Hybrid Joints, Made of 3D Printed Polymer and Aluminium Adherends , 2021, Materials.

[5]  T. Sadowski,et al.  Bending degradation of thin-walled box beams made of aluminum omega profile and GFRP panel connected by mechanical fasteners , 2021, Composite structures.

[6]  T. Reinicke,et al.  Fracture and structural performance of adhesively bonded 3D-printed PETG single lap joints under different printing parameters , 2021, Theoretical and Applied Fracture Mechanics.

[7]  Yaning Li,et al.  Experimental and numerical analysis of 3D printed suture joints under shearing load , 2021, Engineering Fracture Mechanics.

[8]  T. Reinicke,et al.  Structural integrity of adhesively bonded 3D-printed joints , 2021 .

[9]  T. Sadowski,et al.  The influence of aging in salt chamber on strength of aluminum – CFRP single lap joints , 2021 .

[10]  T. Sadowski,et al.  The influence of dual adhesive in single lap joints on strength and energy absorption , 2021 .

[11]  T. Sadowski,et al.  The Use of Neural Networks in the Analysis of Dual Adhesive Single Lap Joints Subjected to Uniaxial Tensile Test , 2021, Materials.

[12]  P. Steinmann,et al.  On thermo-viscoelastic experimental characterization and numerical modelling of VHB polymer , 2020, International Journal of Non-Linear Mechanics.

[13]  H. Shirvani,et al.  Hybrid Manufacturing and Experimental Testing of Glass Fiber Enhanced Thermoplastic Composites , 2019 .

[14]  T. Sadowski,et al.  The Influence of Single Lap Geometry in Adhesive and Hybrid Joints on Their Load Carrying Capacity , 2019, Materials.

[15]  T. Balawender.  THE ABILITY TO CLINCHING AS A FUNCTION OF MATERIAL HARDENING BEHAVIOR , 2018 .

[16]  Bjørn Petter Jelle,et al.  Durability evaluation of adhesive tapes for building applications , 2018 .

[17]  F. París,et al.  Characterization of 3D printed long fibre reinforced composites , 2018 .

[18]  L. F. Silva,et al.  Numerical study of the behaviour of composite mixed adhesive joints under impact strength for the automotive industry , 2018 .

[19]  Tomasz Sadowski,et al.  Modelling and Experimental Testing of Hybrid Joints Made of: Aluminium Adherends, Adhesive Layers and Rivets for Aerospace Applications , 2017 .

[20]  T. Sadowski,et al.  Investigation of the effect of chamfer size on the behaviour of hybrid joints made by adhesive bonding and riveting , 2017 .

[21]  Xiangyu Wang,et al.  A critical review of the use of 3-D printing in the construction industry , 2016 .

[22]  T. Sadowski,et al.  Numerical Modelling of Two-phase Ceramic Composite Response under Uniaxial Loading , 2016 .

[23]  R. Negru,et al.  Experimental and numerical investigations on adhesively bonded joints , 2016 .

[24]  Caterina Casavola,et al.  Orthotropic mechanical properties of fused deposition modelling parts described by classical laminate theory , 2016 .

[25]  Salih Akpinar.  The strength of the adhesively bonded step-lap joints for different step numbers , 2014 .

[26]  Murat Aydin,et al.  A study on the strength of adhesively bonded joints with different adherends , 2014 .

[27]  Tomasz Sadowski,et al.  Effect of Tolerance in the Fitting of Rivets in the Holes of Double Lap Joints Subjected to Uniaxial Tension , 2014 .

[28]  Salih Akpinar,et al.  The effect of the adherend width on the strength of adhesively bonded single-lap joint: Experimental and numerical analysis , 2014 .

[29]  T. Sadowski,et al.  Fatigue Response of the Hybrid Joints Obtained by Hot Spot Welding and Bonding Techniques , 2014 .

[30]  M. Aydin,et al.  The effect of the spew fillet on an adhesively bonded single-lap joint subjected to bending moment , 2013 .

[31]  T. Sadowski,et al.  Numerical Study of the Prestressed Connectors and Their Distribution on the Strength of a Single Lap, a Double Lap and Hybrid Joints Subjected to Uniaxial Tensile Test , 2013 .

[32]  S. T. Amancio-Filho,et al.  Mechanical and failure behaviour of hybrid polymer–metal staked joints , 2013 .

[33]  T. Sadowski.  Gradual degradation in two-phase ceramic composites under compression , 2012 .

[34]  J. Cognard,et al.  Influence of the geometry of coaxial adhesive joints on the transmitted load under tensile and compression loads , 2012 .

[35]  A. D. Nurse,et al.  Stress singularity of symmetric free-edge joints with elasto-plastic behaviour , 2012 .

[36]  T. Sadowski,et al.  The influence of quantity and distribution of cooling channels of turbine elements on level of stresses in the protective layer TBC and the efficiency of cooling , 2012 .

[37]  J. Cognard,et al.  Numerical analysis of the stress distribution in single-lap shear tests under elastic assumption—Application to the optimisation of the mechanical behaviour , 2011 .

[38]  J. Engerer,et al.  The effects of partial bonding in load carrying capacity of single lap joints , 2011 .

[39]  Massimo Rossetto,et al.  Stress intensity factor in bonded joints: influence of the geometry , 2010 .

[40]  Lucas F. M. da Silva,et al.  Effect of material, geometry, surface treatment and environment on the shear strength of single lap joints , 2009 .

[41]  E. Crăciun,et al.  Cracks propagation and interaction in an orthotropic elastic material: Analytical and numerical methods , 2009 .

[42]  T. Sadowski,et al.  Modelling of ‘thermal shocks’ in composite materials using a meshfree FEM , 2009 .

[43]  Jun Deng,et al.  Effect of plate end and adhesive spew geometries on stresses in retrofitted beams bonded with a CFRP plate , 2008 .

[44]  A. Neubrand,et al.  Estimation of the Crack Length After Thermal Shock in FGM Strip , 2004 .

[45]  M. D. Thouless,et al.  The effects of geometry and material properties on the fracture of single lap-shear joints , 2002 .

[46]  Han Jiang,et al.  Investigation of zero-degree peeling behavior of visco-hyperelastic highly stretchable adhesive tape on rigid substrate , 2021 .

[47]  G. Vetrice,et al.  Technological restrictions at 3D printing with Zortrax M200 3D printer , 2019, Tehnika.

[48]  I. Iváñez,et al.  Effect of the geometry in the strength of single-lap adhesive joints of composite laminates under uniaxial tensile load , 2017 .

[49]  A. Biel,et al.  Adhesive Tapes; Cohesive Laws for a Soft Layer , 2014 .

[50]  L. Marșavina,et al.  Kinked crack at a bi-material ceramic interface – Numerical determination of fracture parameters , 2009 .