Simulation of façade and envelope design options for a new institutional building

This paper presents a simulation case study of facade and envelope preliminary design options for the new Engineering building of Concordia University in Montreal. A major principle of the analysis was to create a high quality building envelope in order to optimally control solar gains, reduce heating and cooling energy demand and reduce electricity consumption for lighting, while at the same time maintain a comfortable and pleasant indoor environment. The stated approach of the design team was to aim for an energy-efficient building, employing innovative technologies and integrating concepts such as daylighting and natural ventilation. Detailed energy simulations were therefore performed from the early design stage, in order to present recommendations on the choice of facade, glazings, shading devices, lighting control options, and natural ventilation. Integrated thermal studies, a daylighting analysis and the impact of the above on HVAC system sizing were considered. Simulation results showed that, using an optimum combination of glazings, shading devices and controllable electric lighting systems, the energy savings in perimeter spaces can be substantial. Perimeter heating could be eliminated if a high performance envelope is used. The building is currently being commissioned.

[1]  Joseph B. Murdoch.  Illumination Engineering: From Edison's Lamp to the Laser , 1985 .

[2]  Joseph Andrew Clarke,et al.  Integration in building physics simulation , 2001 .

[3]  M Janak,et al.  Assessing the overall performance of advanced glazing systems , 1998 .

[4]  Refrigerating.  ASHRAE handbook of fundamentals , 1967 .

[5]  W. Lorenz.  A glazing unit for solar control, daylighting and energy conservation , 2001 .

[6]  André De Herde,et al.  Design of low energy office buildings , 2003 .

[7]  Athanasios Tzempelikos,et al.  A methodology for simulation of daylight room illuminance distribution and light dimming for a room with a controlled shading device , 2002 .

[8]  A. Athienitis,et al.  The impact of shading design and control on building cooling and lighting demand , 2007 .

[9]  John Mardaljevic,et al.  Dynamic Daylight Performance Metrics for Sustainable Building Design , 2006 .

[10]  Marilyne Andersen,et al.  Bi-directional transmission properties of Venetian blinds: experimental assessment compared to ray-tracing calculations , 2005 .

[11]  J. Michalsky,et al.  Modeling daylight availability and irradiance components from direct and global irradiance , 1990 .

[12]  Andreas K. Athienitis,et al.  Thermal Analysis and Design of Passive Solar Buildings , 2000 .

[13]  Stephen Selkowitz,et al.  Thermal and daylighting performance of an automated venetian blind and lighting system in a full-scale private office , 1998 .

[14]  Andreas K. Athienitis,et al.  Investigation of the performance of trickle ventilators , 2003 .

[15]  J. Rosenfeld,et al.  Optical and thermal performance of glazing with integral venetian blinds , 2001 .

[16]  D. Arasteh,et al.  Glazing energy performance and design optimization with daylighting , 1984 .