A fatigue assessment technique for modular and pre-stressed orthopaedic implants.

[1]  K. Sloan,et al.  Corrosion at the neck-stem junction as a cause of metal ion release and pseudotumour formation. , 2012, The Journal of bone and joint surgery. British volume.

[2]  W. Walsh,et al.  Wear in alumina-on-alumina ceramic total hip replacements: a retrieval analysis of edge loading. , 2012, The Journal of bone and joint surgery. British volume.

[3]  H. Weinans,et al.  Femoral component neck fracture after failed hip resurfacing arthroplasty. , 2011, The Journal of arthroplasty.

[4]  M. Pekedis,et al.  Comparison of fatigue behaviour of eight different hip stems: a numerical and experimental study , 2011 .

[5]  T. Joyce,et al.  Accelerating failure rate of the ASR total hip replacement. , 2011, The Journal of bone and joint surgery. British volume.

[6]  C. Altstetter,et al.  Failure of the modular neck in a total hip arthroplasty. , 2010, The Journal of arthroplasty.

[7]  D. Rosenblum,et al.  Neuraxial hematoma and paralysis after enoxaparin administration 3 days after attempted spinal anesthesia for total knee arthroplasty. , 2010, The Journal of arthroplasty.

[8]  Z. Farhat,et al.  Early failure of a modular femoral neck total hip arthroplasty component: a case report. , 2010, The Journal of bone and joint surgery. American volume.

[9]  M. Tuke.  DESIGN RATIONALE FOR A LARGE DIAMETER CERAMIC ON CERAMIC HIP BEARING , 2010 .

[10]  H. Knaebel,et al.  Modular titanium alloy neck adapter failures in hip replacement - failure mode analysis and influence of implant material , 2010, BMC musculoskeletal disorders.

[11]  T. Syed,et al.  A fracture through the neck of a Charnley Elite-Plus femoral component: a case report , 2009 .

[12]  R. Michel,et al.  FACTOR OF SAFETY AND WORKING STRESSES OF MARINE PROPULSION SHAFTING , 2009 .

[13]  M. Bostrom,et al.  Incidence of Ceramic Liner Malseating in Trident® Acetabular Shell , 2009, Clinical orthopaedics and related research.

[14]  Subrata Pal,et al.  Effects of trochanteric soft tissue thickness and hip impact velocity on hip fracture in sideways fall through 3D finite element simulations. , 2008, Journal of biomechanics.

[15]  A. Roychowdhury,et al.  Simulation of hip fracture in sideways fall using a 3D finite element model of pelvis-femur-soft tissue complex with simplified representation of whole body. , 2007, Medical engineering & physics.

[16]  Christopher L Peters,et al.  Reduction in early dislocation rate with large-diameter femoral heads in primary total hip arthroplasty. , 2007, The Journal of arthroplasty.

[17]  J. Chao,et al.  Failure analysis of a Ti6Al4V cementless HIP prosthesis , 2007 .

[18]  H. J. Clarke,et al.  Incomplete seating of the liner with the Trident acetabular system: a cause for concern? , 2007, The Journal of bone and joint surgery. British volume.

[19]  M. Lavigne,et al.  A randomised study comparing resection of acetabular bone at resurfacing and total hip replacement. , 2006, The Journal of bone and joint surgery. British volume.

[20]  M M Morlock,et al.  Deformation of press-fitted metallic resurfacing cups. Part 1: Experimental simulation , 2006, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

[21]  Z. Jin,et al.  Deformation of press-fitted metallic resurfacing cups. Part 2: Finite element simulation , 2006, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

[22]  Rajiv A. Naik,et al.  A critical plane gradient approach for the prediction of notched HCF life , 2005 .

[23]  G. Bergmann,et al.  Hip joint contact forces during stumbling , 2004, Langenbeck's Archives of Surgery.

[24]  Mauricio Silva,et al.  Average patient walking activity approaches 2 million cycles per year: pedometers under-record walking activity. , 2002, The Journal of arthroplasty.

[25]  P. Beaulé,et al.  Jumbo Femoral Head for the Treatment of Recurrent Dislocation Following Total Hip Replacement , 2002, The Journal of bone and joint surgery. American volume.

[26]  C. Bourgeault,et al.  Notch Sensitivity of Titanium Alloy, Commercially Pure Titanium, and Stainless Steel Spinal Implants , 2001, Spine.

[27]  M Honl,et al.  Duration and frequency of every day activities in total hip patients. , 2001, Journal of biomechanics.

[28]  G. Bergmann,et al.  Hip contact forces and gait patterns from routine activities. , 2001, Journal of biomechanics.

[29]  H. Rack,et al.  Titanium alloys in total joint replacement--a materials science perspective. , 1998, Biomaterials.

[30]  T P Schmalzried,et al.  Quantitative Assessment of Walking Activity after Total Hip or Knee Replacement* , 1998, The Journal of bone and joint surgery. American volume.

[31]  N Verdonschot,et al.  The effects of cement-stem debonding in THA on the long-term failure probability of cement. , 1997, Journal of biomechanics.

[32]  P. Pynsent,et al.  Metal on Metal Surface Replacement of the Hip: Experience of the McMinn Prosthesis , 1996, Clinical orthopaedics and related research.

[33]  L W Marks,et al.  The use of strain energy as a convergence criterion in the finite element modelling of bone and the effect of model geometry on stress convergence. , 1993, Journal of biomedical engineering.

[34]  G. Bergmann,et al.  Hip joint loading during walking and running, measured in two patients. , 1993, Journal of biomechanics.

[35]  S. Evans,et al.  The effect of a plasma-sprayed hydroxyapatite coating on the fatigue properties of Ti-6Al-4V , 1993 .

[36]  W C Hayes,et al.  Prediction of femoral impact forces in falls on the hip. , 1991, Journal of biomechanical engineering.

[37]  Vincent Mor,et al.  Multiple Stumbles: A Risk Factor for Falls in Community‐Dwelling Elderly; A Prospective Study , 1990, Journal of the American Geriatrics Society.

[38]  H. Amstutz,et al.  "Modes of failure" of cemented stem-type femoral components: a radiographic analysis of loosening. , 1979, Clinical orthopaedics and related research.

[39]  G Bergmann,et al.  Realistic loads for testing hip implants. , 2010, Bio-medical materials and engineering.

[40]  Browne,et al.  Analysis of a Thin Walled, Large Bore Ceramic Acetabular Cup with Improved in-vivo Stability and Integrity , 2009 .

[41]  Hasan Kurtaran,et al.  Static, dynamic and fatigue behavior of newly designed stem shapes for hip prosthesis using finite element analysis , 2007 .

[42]  M. Kuntz.  Live-Time Prediction of BIOLOX® delta , 2007 .

[43]  Jun-Dong Chang,et al.  Bioceramics and alternative bearings in joint arthroplasty , 2007 .

[44]  S. Cook,et al.  Fatigue failure of noncemented porous-coated implants. A retrieval study. , 1991, The Journal of bone and joint surgery. British volume.

[45]  John Goodman,et al.  Mechanics applied to engineering , 1904 .