Simple Microfluidic Approach to Fabricate Monodisperse Hollow Microparticles for Multidrug Delivery.

Herein, we report the production of monodisperse hollow microparticles from three different polymers, namely, pH-responsive acetylated dextran and hypromellose acetate succinate and biodegradable poly(lactic-co-glycolic acid), at varying polymer concentrations using a poly(dimethylsiloxane)-based microfluidic device. Hollow microparticles formed during solvent diffusion into the continuous phase when the polymer close to the interface solidified, forming the shell. In the inner part of the particle, phase separation induced solvent droplet formation, which dissolved the shell, forming a hole and a hollow-core particle. Computational simulations showed that, despite the presence of convective recirculation around the droplet, the mass-transfer rate of the solvent dissolution from the droplet to the surrounding phase was dominated by diffusion. To illustrate the potential use of hollow microparticles, we simultaneously encapsulated two anticancer drugs and investigated their loading and release profiles. In addition, by utilizing different polymer shells and polymer concentrations, the release profiles of the model drugs could be tailored according to specific demands and applications. The high encapsulation efficiency, controlled drug release, unique hollow microparticle structure, small particle size (<7 μm), and flexibility of the polymer choice could make these microparticles advanced platforms for pulmonary drug delivery.

[1]  Christophe Clanet,et al.  Transition from dripping to jetting , 1999, Journal of Fluid Mechanics.

[2]  J. Douglas,et al.  Microfluidic approach to the formation of internally porous polymer particles by solvent extraction. , 2014, Langmuir : the ACS journal of surfaces and colloids.

[3]  L. Gravitz.  Chemoprevention: First line of defence , 2011, Nature.

[4]  Jarno Salonen,et al.  Microfluidic assisted one-step fabrication of porous silicon@acetalated dextran nanocomposites for precisely controlled combination chemotherapy. , 2015, Biomaterials.

[5]  Apurva A Desai,et al.  Sorafenib in advanced clear-cell renal-cell carcinoma. , 2007, The New England journal of medicine.

[6]  Samir Mitragotri,et al.  An overview of clinical and commercial impact of drug delivery systems. , 2014, Journal of controlled release : official journal of the Controlled Release Society.

[7]  Vishnu Sresht,et al.  Dynamically reconfigurable complex emulsions via tunable interfacial tensions , 2015, Nature.

[8]  Jiandi Wan,et al.  Microfluidic-Based Synthesis of Hydrogel Particles for Cell Microencapsulation and Cell-Based Drug Delivery , 2012 .

[9]  Chih-Yu Wang,et al.  Synthesis of uniform poly(d,l‐lactide) and poly(d,l‐lactide‐co‐glycolide) microspheres using a microfluidic chip for comparison , 2014, Electrophoresis.

[10]  Ana C. Fonseca,et al.  Drug delivery systems: Advanced technologies potentially applicable in personalized treatments , 2010, EPMA Journal.

[11]  Toru Torii,et al.  Synthesis of Monodisperse Bicolored Janus Particles with Electrical Anisotropy Using a Microfluidic Co‐Flow System , 2006 .

[12]  Jarno Salonen,et al.  Fabrication of a Multifunctional Nano‐in‐micro Drug Delivery Platform by Microfluidic Templated Encapsulation of Porous Silicon in Polymer Matrix , 2014, Advanced materials.

[13]  Shirui Mao,et al.  Recent advances in controlled pulmonary drug delivery. , 2015, Drug discovery today.

[14]  Minseok Seo,et al.  Polymer particles with various shapes and morphologies produced in continuous microfluidic reactors. , 2005, Journal of the American Chemical Society.

[15]  Gerhard Scheuch,et al.  Clinical perspectives on pulmonary systemic and macromolecular delivery. , 2006, Advanced drug delivery reviews.

[16]  R. Andersson,et al.  Celecoxib synergizes human pancreatic ductal adenocarcinoma cells to sorafenib-induced growth inhibition. , 2012, Pancreatology : official journal of the International Association of Pancreatology (IAP) ... [et al.].

[17]  Zhongping Chen,et al.  Visualization and measurement of capillary-driven blood flow using spectral domain optical coherence tomography , 2012, Microfluidics and nanofluidics.

[18]  M. Selva,et al.  The Chemistry of Dimethyl Carbonate , 2002 .

[19]  Yanwei Jia,et al.  Control and measurement of the phase behavior of aqueous solutions using microfluidics. , 2007, Journal of the American Chemical Society.

[20]  Robert Langer,et al.  Preparation of monodisperse biodegradable polymer microparticles using a microfluidic flow-focusing device for controlled drug delivery. , 2009, Small.

[21]  Samantha A. Meenach,et al.  Synthesis, optimization, and characterization of camptothecin-loaded acetalated dextran porous microparticles for pulmonary delivery. , 2012, Molecular pharmaceutics.

[22]  S. Herminghaus,et al.  Droplet based microfluidics , 2012, Reports on progress in physics. Physical Society.

[23]  Vesa-Pekka Lehto,et al.  Microfluidic assembly of monodisperse multistage pH-responsive polymer/porous silicon composites for precisely controlled multi-drug delivery. , 2014, Small.

[24]  Jong-sang Park,et al.  Investigation of the factors influencing the release rates of cyclosporin A-loaded micro- and nanoparticles prepared by high-pressure homogenizer. , 2002, Journal of controlled release : official journal of the Controlled Release Society.

[25]  Solvent evaporation of spin cast films: "crust" effects , 2001, cond-mat/0111117.

[26]  Chih-Hui Yang,et al.  Microfluidic assisted preparation of CdSe/ZnS nanocrystals encapsulated into poly(DL-lactide-co-glycolide) microcapsules , 2007 .

[27]  Yung-Sheng Lin,et al.  An Aluminum Microfluidic Chip Fabrication Using a Convenient Micromilling Process for Fluorescent Poly(dl-lactide-co-glycolide) Microparticle Generation , 2012, Sensors.

[28]  Dhananjay Dendukuri,et al.  The Synthesis and Assembly of Polymeric Microparticles Using Microfluidics , 2009 .

[29]  R. Mehta,et al.  Prediction of solvent removal profile and effect on properties for peptide-loaded PLGA microspheres prepared by solvent extraction/ evaporation method , 1995 .

[30]  T. Seki,et al.  Influence of particle size on drug delivery to rat alveolar macrophages following pulmonary administration of ciprofloxacin incorporated into liposomes , 2006, Journal of drug targeting.

[31]  Robert Langer,et al.  Microfluidic platform for controlled synthesis of polymeric nanoparticles. , 2008, Nano letters.

[32]  T. Taniguchi,et al.  One-step synthesis of spherical/nonspherical polymeric microparticles using non-equilibrium microfluidic droplets , 2014 .

[33]  Niklas Sandler,et al.  Microfluidic templated mesoporous silicon-solid lipid microcomposites for sustained drug delivery. , 2013, ACS applied materials & interfaces.

[34]  S. Cao,et al.  Hollow hybrid hydroxyapatite microparticles with sustained and pH-responsive drug delivery properties , 2013 .

[35]  I. Katakis,et al.  Numerical simulation of wall mass transfer rates in capillary-driven flow in microchannels☆ , 2012 .

[36]  A. Bozkır,et al.  Preparation and evaluation of PLGA microparticles as carrier for the pulmonary delivery of rhIL-2 : I. Effects of some formulation parameters on microparticle characteristics , 2011, Journal of microencapsulation.

[37]  David A Edwards,et al.  Bioengineering of therapeutic aerosols. , 2002, Annual review of biomedical engineering.

[38]  Woonggyu Jung,et al.  Optical sectioning for microfluidics: secondary flow and mixing in a meandering microchannel. , 2008, Lab on a chip.

[39]  K. Jain,et al.  Drug delivery systems - an overview. , 2008, Methods in molecular biology.

[40]  Chunfeng Zhou,et al.  Spontaneous shrinkage of drops and mass conservation in phase-field simulations , 2007, J. Comput. Phys..

[41]  D. Weitz,et al.  Single-cell analysis and sorting using droplet-based microfluidics , 2013, Nature Protocols.

[42]  Masayo Umebayashi,et al.  Combining celecoxib with sorafenib synergistically inhibits hepatocellular carcinoma cells in vitro. , 2013, Anticancer research.

[43]  Wilhelm T S Huck,et al.  Hydrophilic PDMS microchannels for high-throughput formation of oil-in-water microdroplets and water-in-oil-in-water double emulsions. , 2010, Lab on a chip.

[44]  M. Dolovich,et al.  Pulmonary drug delivery. Part I: physiological factors affecting therapeutic effectiveness of aerosolized medications. , 2003, British journal of clinical pharmacology.

[45]  Feng Guo,et al.  Generation of disk-like hydrogel beads for cell encapsulation and manipulation using a droplet-based microfluidic device , 2012 .

[46]  Hariprasad J. Subramani,et al.  Dripping-jetting transitions in a dripping faucet. , 2004, Physical review letters.

[47]  N Lotan,et al.  Large porous particles for pulmonary drug delivery. , 1997, Science.

[48]  P. Ferreira,et al.  Designing polymeric microparticles for biomedical and industrial applications , 2013 .

[49]  Abraham P Lee,et al.  PLGA micro/nanosphere synthesis by droplet microfluidic solvent evaporation and extraction approaches. , 2010, Lab on a chip.

[50]  J. McCubrey,et al.  Novel Combination of Sorafenib and Celecoxib Provides Synergistic Anti-Proliferative and Pro-Apoptotic Effects in Human Liver Cancer Cells , 2013, PloS one.

[51]  J. Rantanen,et al.  Critical Solvent Properties Affecting the Particle Formation Process and Characteristics of Celecoxib-Loaded PLGA Microparticles via Spray-Drying , 2012, Pharmaceutical Research.

[52]  Jin Woong Kim,et al.  A microfluidic approach to encapsulate living cells in uniform alginate hydrogel microparticles. , 2012, Macromolecular bioscience.

[53]  Yundong Wang,et al.  Controllable microfluidic production of gas-in-oil-in-water emulsions for hollow microspheres with thin polymer shells. , 2012, Lab on a chip.

[54]  Yan Liu,et al.  Celecoxib Inhibits Interleukin-6/Interleukin-6 Receptor–Induced JAK2/STAT3 Phosphorylation in Human Hepatocellular Carcinoma Cells , 2011, Cancer Prevention Research.

[55]  Tiantian Kong,et al.  Droplet based microfluidic fabrication of designer microparticles for encapsulation applications. , 2012, Biomicrofluidics.

[56]  B. Gander,et al.  Drug microencapsulation by PLA/PLGA coacervation in the light of thermodynamics. 2. Parameters determining microsphere formation. , 1998, Journal of pharmaceutical sciences.

[57]  D. Weitz,et al.  25th Anniversary Article: Double Emulsion Templated Solid Microcapsules: Mechanics And Controlled Release , 2014, Advanced materials.