Strain dependent stiffness of plasma sprayed thermal barrier coatings

[1]  J. Demasi-marcin,et al.  Protective coatings in the gas turbine engine , 1994 .

[2]  E. Rybicki,et al.  A cantilever beam method for evaluating Young’s modulus and Poisson’s ratio of thermal spray coatings , 1995 .

[3]  T. Haubold,et al.  Mechanical and thermophysical properties of thick PYSZ thermal barrier coatings : correlation with microstructure and spraying parameters , 1998 .

[4]  D. Wortman,et al.  Relationships between residual stress, microstructure and mechanical properties of electron beam–physical vapor deposition thermal barrier coatings , 1998 .

[5]  Influence of sample deformation and porosity on mechanical properties by instrumented microindentation technique , 1998 .

[6]  J. Dubský,et al.  Pressure dependence of young's moduli of thermal sprayed materials , 1999 .

[7]  D. Stöver,et al.  Changes in porosity and Young’s Modulus due to sintering of plasma sprayed thermal barrier coatings , 1999 .

[8]  Hyungjun Kim,et al.  Elastic modulus of plasma-sprayed coatings determined by indentation and bend tests , 1999 .

[9]  Rolf W. Steinbrech,et al.  Effect of heat treatment on elastic properties of separated thermal barrier coatings , 1999 .

[10]  C. Berndt,et al.  Modelling of elastic constants of plasma spray deposits with ellipsoid-shaped voids , 1999 .

[11]  C. Berndt,et al.  Influence of plasma spray parameters on mechanical properties of yttria stabilized zirconia coatings. II: Acoustic emission response , 2000 .

[12]  H. Bahr,et al.  Toughness anisotropy and damage behavior of plasma sprayed ZrO2 thermal barrier coatings , 2000 .

[13]  Christopher C. Berndt,et al.  Influence of plasma spray parameters on mechanical properties of yttria stabilized zirconia coatings. I: Four point bend test , 2000 .

[14]  J. A. Thompson,et al.  THE EFFECT OF HEAT TREATMENT ON THE STIFFNESS OF ZIRCONIA TOP COATS IN PLASMA-SPRAYED TBCs , 2001 .

[15]  K. Khor,et al.  Mechanical behavior of plasma sprayed functionally graded YSZ/NiCoCrAlY composite coatings , 2001 .

[16]  C. Berndt,et al.  Evaluation of microhardness and elastic modulus of thermally sprayed nanostructured zirconia coatings , 2001 .

[17]  I. Sevostianov,et al.  Plasma-sprayed ceramic coatings: anisotropic elastic and conductive properties in relation to the microstructure; cross-property correlations , 2001 .

[18]  K. Neufuss,et al.  Elastic and inelastic effects in compression in plasma-sprayed ceramic coatings , 2001 .

[19]  K. Bobzin,et al.  Mechanical properties of EB-PVD-thermal barrier coatings by nanoindentation , 2001 .

[20]  Anthony G. Evans,et al.  Mechanisms controlling the durability of thermal barrier coatings , 2001 .

[21]  J. Plešek,et al.  Nonlinear elastic behavior in compression of thermally sprayed materials , 2002 .

[22]  D. Munz,et al.  Numerical investigation of residual stress fields and crack behavior in TBC systems , 2002 .

[23]  J. Malzbender,et al.  Determination of the stress-dependent stiffness of plasma-sprayed thermal barrier coatings using depth-sensitive indentation , 2003 .

[24]  K. Bouzakis,et al.  Determination of mechanical properties of electron beam-physical vapor deposition-thermal barrier coatings (EB-PVD-TBCs) by means of nanoindentation and impact testing , 2003 .

[25]  J. Malzbender,et al.  Mechanical methods to determine layer compliances within multilayered composites , 2003 .

[26]  G. Morscher,et al.  Quasistatic vs. dynamic modulus measurements of plasma-sprayed thermal barrier coatings , 2008 .