Bainite plate thickness reduction and microstructure tailoring by double austempering of Al-rich 3Mn steel

[1]  J. Jiménez,et al.  Bainitic Ferrite Plate Thickness Evolution in Two Nanostructured Steels , 2021, Materials.

[2]  J. Jiménez,et al.  Effect of Microsegregation and Bainitic Reaction Temperature on the Microstructure and Mechanical Properties of a High-Carbon and High-Silicon Cast Steel , 2021, Metals.

[3]  C. García-Mateo,et al.  Thermodynamic analysis and isothermal bainitic transformation kinetics in lean medium-Mn steels , 2020, Journal of Thermal Analysis and Calorimetry.

[4]  A. Shash,et al.  Replacement of silicon by aluminum with the aid of vanadium for galvanized TRIP steel , 2020 .

[5]  Zhengyi Jiang,et al.  Effect of austenisation temperature on bainite transformation below martensite starting temperature , 2019, Materials Science and Technology.

[6]  C. Celada-Casero,et al.  Fracture mechanisms and microstructure in a medium Mn quenching and partitioning steel exhibiting macrosegregation , 2019, Materials Science and Engineering: A.

[7]  A. Zhao,et al.  Influence of Prior Martensite on Bainite Transformation, Microstructures, and Mechanical Properties in Ultra-Fine Bainitic Steel , 2019, Materials.

[8]  Y. Pei,et al.  Microstructural and mechanical properties of low-carbon ultra-fine bainitic steel produced by multi-step austempering process , 2018, Materials Science and Engineering: A.

[9]  Guang Xu,et al.  Refined Bainite Microstructure and Mechanical Properties of a High‐Strength Low‐Carbon Bainitic Steel Treated by Austempering Below and Above MS , 2018 .

[10]  D. Ponge,et al.  Competition between formation of carbides and reversed austenite during tempering of a medium-manganese steel studied by thermodynamic-kinetic simulations and atom probe tomography , 2018 .

[11]  Nan Ye,et al.  Improved microstructural homogeneity and mechanical property of medium manganese steel with Mn segregation banding by alternating lath matrix , 2018 .

[12]  Hu Bin,et al.  Recent progress in medium-Mn steels made with new designing strategies, a review , 2017 .

[13]  D. Porter,et al.  Transferring Nanoscale Bainite Concept to Lower C Contents: A Perspective , 2017 .

[14]  B. Avishan,et al.  Two-step austempering of high performance steel with nanoscale microstructure , 2017 .

[15]  T. Sourmail,et al.  Tensile Ductility of Nanostructured Bainitic Steels: Influence of Retained Austenite Stability , 2017 .

[16]  J. Jiménez,et al.  Analyzing the scale of the bainitic ferrite plates by XRD, SEM and TEM , 2016 .

[17]  Kyung Il Kim,et al.  Control of retained austenite morphology through double bainitic transformation , 2016 .

[18]  S. Kundu,et al.  Formation of bainite below the MS temperature: Kinetics and crystallography , 2016 .

[19]  J. Sietsma,et al.  Effect of Prior Athermal Martensite on the Isothermal Transformation Kinetics Below Ms in a Low-C High-Si Steel , 2016, Metallurgical and Materials Transactions A.

[20]  S. Suwas,et al.  Generalized scaling of misorientation angle distributions at meso-scale in deformed materials , 2014, Scientific Reports.

[21]  D. Suh,et al.  Austenite in Transformation-Induced Plasticity Steel Subjected to Multiple Isothermal Heat Treatments , 2014, Metallurgical and Materials Transactions A.

[22]  J. Sietsma,et al.  Microstructural analysis of martensite constituents in quenching and partitioning steels , 2014 .

[23]  F. Hu,et al.  Multi-step isothermal bainitic transformation in medium-carbon steel , 2014 .

[24]  S. L. Shrestha,et al.  An automated method of quantifying ferrite microstructures using electron backscatter diffraction (EBSD) data. , 2014, Ultramicroscopy.

[25]  C. Capdevila,et al.  An assessment of the contributing factors to the nanoscale structural refinement of advanced bainitic steels , 2013 .

[26]  J. D. Boyd,et al.  Effect of Microstructure on Retained Austenite Stability and Tensile Behaviour in an Aluminum-Alloyed TRIP Steel , 2015 .

[27]  A. Grajcar.  Segregation Behaviour of Third Generation Advanced High-Strength Mn-Al Steels , 2012 .

[28]  Jingkai Yang,et al.  Microstructure and mechanical properties of high-carbon Si–Al-rich steel by low-temperature austempering , 2012 .

[29]  M. Opiela,et al.  Segregation of alloying elements in thermomechanically rolled medium-Mn multiphase steels , 2012 .

[30]  G. Purdy,et al.  Analyses of Transformation Kinetics of Carbide-Free Bainite Above and Below the Athermal Martensite-Start Temperature , 2012, Metallurgical and Materials Transactions A.

[31]  H. Palkowski,et al.  Low temperature bainite in steel with 0.26 wt% C , 2010 .

[32]  D. Raabe,et al.  Evaluation of the Crystallographic Orientation Relationships between FCC and BCC Phases in TRIP Steels , 2009 .

[33]  C. Capdevila,et al.  Mechanical stability of retained austenite during plastic deformation of super high strength carbide free bainitic steels , 2009 .

[34]  H. Bhadeshia,et al.  Uncertainties in dilatometric determination of martensite start temperature , 2007 .

[35]  L. Kestens,et al.  Microstructure and texture of a lightly deformed TRIP-assisted steel characterized by means of the EBSD technique , 2007 .

[36]  H. Bhadeshia,et al.  Bimodal size-distribution of bainite plates , 2006 .

[37]  Jonathan P. Wright,et al.  Thermal stability of retained austenite in TRIP steels studied by synchrotron X-ray diffraction during cooling , 2005 .

[38]  H. Bhadeshia.  Bulk nanocrystalline steel , 2005 .

[39]  Jinghui Wu,et al.  Image Quality Analysis: A New Method of Characterizing Microstructures , 2005 .

[40]  F. Caballero,et al.  The Role of Retained Austenite on Tensile Properties of Steels with Bainitic Microstructures , 2005 .

[41]  D. Kaplan,et al.  Morphological aspects of martensite–austenite constituents in intercritical and coarse grain heat affected zones of structural steels , 2004 .

[42]  H. Bhadeshia,et al.  Development of Hard Bainite , 2003 .

[43]  Kiyotaka Nakano,et al.  Retained austenite characteristics and stretch-flangeability of high-strength low-alloy TRIP type bainitic sheet steels , 2002 .

[44]  Francisca García Caballero,et al.  Very strong low temperature bainite , 2002 .

[45]  C. Capdevila,et al.  Application of dilatometric analysis to the study of solid–solid phase transformations in steels , 2002 .

[46]  Tsutomu Iida,et al.  Stretch-flangeability of a High-strength TRIP Type Bainitic Sheet Steel , 2000 .

[47]  H. Bhadeshia,et al.  Austenite films in bainitic microstructures , 1995 .

[48]  H. Bhadeshia,et al.  Bainite in Steels , 2019 .