Influences of silicon carbide fineness on thermal and mechanical properties of cement-based composites

[1]  M. Amani,et al.  Experimental and machine learning study of thermal conductivity of cement composites for geothermal wells , 2023, Geothermics.

[2]  W. Cheng,et al.  Revealing underlying mechanisms affecting electrokinetic remediation of an artificially Cu- and Pb-contaminated loess using the external regulatory system with adsorbent , 2022, Frontiers in Materials.

[3]  W. Cheng,et al.  Investigating the effect of degree of compaction, initial water content, and electric field intensity on electrokinetic remediation of an artificially Cu- and Pb-contaminated loess , 2022, Acta Geotechnica.

[4]  W. Cheng,et al.  Micro-structural characteristics deterioration of intact loess under acid and saline solutions and resultant macro-mechanical properties , 2022, Soil and Tillage Research.

[5]  Yang Yao,et al.  A thermal conductivity prediction model of cement-based grouts for ground source heat pump , 2022, International Communications in Heat and Mass Transfer.

[6]  Huang Wei,et al.  Using silicon carbide to increase thermal conductivity of cement composite for improving heating efficiency of floor heating system , 2022, Construction and Building Materials.

[7]  W. Cheng,et al.  Revealing the Enhancement and Degradation Mechanisms Affecting the Performance of Carbonate Precipitation in EICP Process , 2021, Frontiers in Bioengineering and Biotechnology.

[8]  S. Wen,et al.  Effects of chemical contamination on microscale structural characteristics of intact loess and resultant macroscale mechanical properties , 2021 .

[9]  Hong-gi Kim,et al.  Ice-melting performance assessment of cement composites using silicon carbide as fine aggregate , 2021, Applied Thermal Engineering.

[10]  L. Singh,et al.  Studies on microstructural and thermo-physico properties of microencapsulated eutectic phase change material incorporated pure cement system , 2021 .

[11]  M. Johnsson,et al.  A proposed model for spark plasma sintering of SiC-Si nanocomposite with different SiC particle sizes , 2020 .

[12]  G. Long,et al.  Microhardness characteristics of high-strength cement paste and interfacial transition zone at different curing regimes , 2019, Construction and Building Materials.

[13]  Xianzhi Song,et al.  Study on thermal conductivity of cement with thermal conductive materials in geothermal well , 2019, Geothermics.

[14]  Hanfeng Huang,et al.  Effect of environmental thermal fatigue on concrete performance based on mesostructural and microstructural analyses , 2019, Construction and Building Materials.

[15]  V. Mechtcherine,et al.  P- and n-type thermoelectric cement composites with CVD grown p- and n-doped carbon nanotubes: Demonstration of a structural thermoelectric generator , 2019, Energy and Buildings.

[16]  Daehoon Kim,et al.  Experimental and numerical investigation of thermal properties of cement-based grouts used for vertical ground heat exchanger , 2017 .

[17]  Fang Wang,et al.  Theoretical and experimental study on multi-phase model of thermal conductivity for fiber reinforced concrete , 2017 .

[18]  M. Belmonte,et al.  Thermal conductivity of silicon carbide composites with highly oriented graphene nanoplatelets , 2016 .

[19]  J. Yeo,et al.  Influence of silicon carbide as a mineralizer on mechanical and thermal properties of silica-based ceramic cores , 2016 .

[20]  Gyoungman Kim,et al.  Thermal conductivities under unsaturated condition and mechanical properties of cement-based grout for vertical ground-heat exchangers in Korea—A case study , 2016 .

[21]  Yunping Xi,et al.  Mesoscale model for thermal conductivity of concrete , 2015 .

[22]  Yiyun Zhu,et al.  Preparation and characterization of high porosity cement-based foam material , 2015 .

[23]  Zongjin Li,et al.  Hydration stage identification and phase transformation of calcium sulfoaluminate cement at early age , 2015 .

[24]  M. V. Kok.  Thermal characterization of different origin class-G cements , 2014 .

[25]  Huigang Xiao,et al.  Self-deicing road system with a CNFP high-efficiency thermal source and MWCNT/cement-based high-thermal conductive composites , 2013 .

[26]  Daniel Castro-Fresno,et al.  Study of different grouting materials used in vertical geothermal closed-loop heat exchangers , 2013 .

[27]  Chunhua Lu,et al.  Mechanical and thermal properties of cement composite graphite for solar thermal storage materials , 2012 .

[28]  G. Espinosa-Paredes,et al.  Thermal property measurement of Mexican geothermal cementing systems using an experimental technique based on the Jaeger method , 2002 .

[29]  Byoungsun Park,et al.  Effects of fineness and chemical activators on the hydration and physical properties of high-volume fly-ash cement pastes , 2022, Journal of Building Engineering.

[30]  Sheng Wang,et al.  Investigation on thermal conductivity property and hydration mechanism of graphene-composite cement for geothermal exploitation , 2022, Geothermics.

[31]  Hong-gi Kim,et al.  Investigation of sulfuric acid attack upon cement mortars containing silicon carbide powder , 2020 .

[32]  M. Balasubramanian,et al.  Thermal conductivity studies on Si/SiC ceramic composites , 2011 .