Effect of cerium/lanthanum addition on microstructure and mechanical properties of Al7075 alloy via mechanical alloying and sintering

[1]  Xiaoyang Xu,et al.  Effect of Y and Ce additions on microstructure and mechanical properties of Mg–Zn–Zr alloys , 2015 .

[2]  Zhiming Shi,et al.  Microstructure and mechanical properties of Gd-modified A356 aluminum alloys , 2015 .

[3]  Hong Yan,et al.  Modification of primary α-Al, eutectic silicon and β-Al5FeSi phases in as-cast AlSi10Cu3 alloys with (La+Yb) addition , 2015 .

[4]  X. Su,et al.  Distribution uniformity of added elements in twin-roll cast Al–Zn–Mg–Cu alloy by multi-electromagnetic fields , 2015, Rare Metals.

[5]  Q. Hao,et al.  Dual characteristic of trace rare earth elements in a commercial casting Al–Cu–X alloy , 2015, Rare Metals.

[6]  B. Xiong,et al.  Changes of microstructure of different quench sensitivity 7,000 aluminum alloy after end quenching , 2014, Rare Metals.

[7]  J. Camarillo-Cisneros,et al.  Mechanical properties of the A356 aluminum alloy modified with La/Ce , 2013 .

[8]  Xiaowu Hu,et al.  Effects of rare earth Er additions on microstructure development and mechanical properties of die-cast ADC12 aluminum alloy , 2012 .

[9]  Zhongwei Chen,et al.  Effect of Ce addition on microstructure of Al20Cu2Mn3 twin phase in an Al–Cu–Mn casting alloy , 2012 .

[10]  J. Bastidas,et al.  Anticorrosion behavior of conversion coatings obtained from unbuffered cerium salts solutions on AA6061-T6 , 2011 .

[11]  C. S. Venkatesha,et al.  Evaluation of mechanical properties of as-cast Al–Zn–Ce alloy , 2010 .

[12]  Jing-Chie Lin,et al.  Effect of trace La addition on the microstructures and mechanical properties of A356 (Al–7Si–0.35Mg) aluminum alloys , 2009 .

[13]  N. Srisukhumbowornchai,et al.  Influence of Sc modification on the fluidity of an A356 aluminum alloy , 2009 .

[14]  P. Yu,et al.  Effect of substituting cerium-rich mischmetal with lanthanum on microstructure and mechanical properties of die-cast Mg–Al–RE alloys , 2009 .

[15]  Guojun Zhang,et al.  Microstructure and strengthening mechanisms of molybdenum alloy wires doped with lanthanum oxide particles , 2009 .

[16]  V. Popov,et al.  A possibility of using mechanical alloying for developing metal matrix composites with light-weight reinforcements , 2007 .

[17]  Andrew M. Minor,et al.  Focused Ion Beam Microscopy and Micromachining , 2007 .

[18]  Wang Yunli,et al.  Effect of Cerium on Mechanical Performance and Electrical Conductivity of Aluminum Rod for Electrical Purpose , 2006 .

[19]  Elisa Maria Ruiz-Navas,et al.  One step production of aluminium matrix composite powders by mechanical alloying , 2006 .

[20]  Huang,et al.  Effect of Rare Earth Sc Addition on Microstructure and Mechanical Properties of an Al-Cu-Mg-Ag Alloy , 2003 .

[21]  José M. Torralba,et al.  Effect of mechanical alloying on the morphology, microstructure and properties of aluminium matrix composite powders , 2003 .

[22]  C. Suryanarayana,et al.  The science and technology of mechanical alloying , 2001 .

[23]  J. W. Kaczmar,et al.  The production and application of metal matrix composite materials , 2000 .

[24]  R. P. Elliott,et al.  The Al−La (Aluminum-Lanthanum) system , 1981 .

[25]  K. Gschneidner,et al.  The Al−Ce (Aluminum-Cerium) system , 1981 .

[26]  J. Lyle,et al.  Powder metallurgy approach for control of microstructure and properties in high strength aluminum alloys , 1975 .

[27]  J. Benjamin.  Dispersion strengthened superalloys by mechanical alloying , 1970, Metallurgical and Materials Transactions B.