Numerical analysis of gas crossover effects in polymer electrolyte fuel cells (PEFCs)

The gas crossover phenomenon in polymer electrolyte fuel cells (PEFCs) is an indicator of membrane degradation. The objective of this paper is to numerically investigate the effects of hydrogen and oxygen crossover through the membrane in PEFCs. A gas crossover model is newly developed and implemented in a comprehensive multi-dimensional, multi-phase PEFC model developed earlier. A parametric study is carried out to investigate the effects of the crossover diffusion coefficients for hydrogen and oxygen as well as the membrane thickness. The simulation results demonstrate that the hydrogen crossover induces an additional oxygen reduction reaction (ORR) and consequently causes an additional voltage drop, while the influence of oxygen crossover on PEFC performance is relatively insignificant because it leads to the hydrogen/oxygen chemical reaction at the anode side. Finally, using the time-dependent gas crossover data that are available in the literature (measured in days), we conduct gas crossover simulations to examine the effects of increased gas crossover due to membrane degradation on PEFC performance and successfully demonstrate decaying polarization curves with respect to time. This study clearly elucidates the detailed mechanisms of the hydrogen and oxygen crossover phenomena and their effect on PEFC performance and durability.

[1]  D. Wilkinson,et al.  Degradation of polymer electrolyte membranes , 2006 .

[2]  Chao-Yang Wang,et al.  A multiphase mixture model for multiphase, multicomponent transport in capillary porous media—I. Model development , 1996 .

[3]  S. Srinivasan,et al.  Microelectrode Investigation of Oxygen Permeation in Perfluorinated Proton Exchange Membranes with Different Equivalent Weights , 1996 .

[4]  Minoru Inaba,et al.  Gas crossover and membrane degradation in polymer electrolyte fuel cells , 2006 .

[5]  Minoru Inaba,et al.  Durability of perfluorinated ionomer membrane against hydrogen peroxide , 2006 .

[6]  Hui Wen Ku,et al.  The optimal parameters estimation for rectangular cylinders installed transversely in the flow channel of PEMFC from a three-dimensional PEMFC model and the Taguchi method , 2011 .

[7]  Tetsuo Sakai,et al.  Gas Diffusion in the Dried and Hydrated Nafions , 1986 .

[8]  Chaoyang Wang,et al.  Probing Liquid Water Saturation in Diffusion Media of Polymer Electrolyte Fuel Cells , 2007 .

[9]  Jiujun Zhang,et al.  A review of accelerated stress tests of MEA durability in PEM fuel cells , 2009 .

[10]  S. Yi,et al.  Computational analysis of transport phenomena in proton exchange membrane for polymer electrolyte fuel cells , 2008 .

[11]  A. Parthasarathy,et al.  Temperature Dependence of the Electrode Kinetics of Oxygen Reduction at the Platinum/Nafion® Interface—A Microelectrode Investigation , 1992 .

[12]  T. Springer,et al.  Polymer Electrolyte Fuel Cell Model , 1991 .

[13]  Xuan Cheng,et al.  Hydrogen crossover in high-temperature PEM fuel cells , 2007 .

[14]  Hyunchul Ju,et al.  Investigation of the effects of the anisotropy of gas-diffusion layers on heat and water transport in polymer electrolyte fuel cells , 2009 .

[15]  Göran Sundholm,et al.  In-situ measurements of gas permeability in fuel cell membranes using a cylindrical microelectrode , 2002 .

[16]  John W. Weidner,et al.  Importance of catalyst stability vis-à-vis hydrogen peroxide formation rates in PEM fuel cell electrodes , 2009 .

[17]  E. Ticianelli,et al.  A performance and degradation study of Nafion 212 membrane for proton exchange membrane fuel cells , 2009 .

[18]  Sanjeev Mukerjee,et al.  Degradation mechanism study of perfluorinated proton exchange membrane under fuel cell operating conditions , 2008 .

[19]  S. Kocha,et al.  Characterization of gas crossover and its implications in PEM fuel cells , 2006 .

[20]  Hyunchul Ju,et al.  Analyzing the effects of immobile liquid saturation and spatial wettability variation on liquid water transport in diffusion media of polymer electrolyte fuel cells (PEFCs) , 2008 .

[21]  Lim Kim,et al.  Degradation mechanism of electrocatalyst during long-term operation of PEMFC , 2009 .

[22]  Stability of Nanostructured Pt/Glassy Carbon Electrodes Prepared by Colloidal Lithography , 2008 .

[23]  Thomas F. Fuller,et al.  PEM Fuel Cell Pt ∕ C Dissolution and Deposition in Nafion Electrolyte , 2007 .

[24]  D. Curtin,et al.  Advanced materials for improved PEMFC performance and life , 2004 .

[25]  A. Weber.  Gas-Crossover and Membrane-Pinhole Effects in Polymer-Electrolyte Fuel Cells , 2008 .

[26]  Yosuke Matsukuma,et al.  Evaluation of the thickness of membrane and gas diffusion layer with simplified two-dimensional reaction and flow analysis of polymer electrolyte fuel cell , 2006 .

[27]  K. Kang,et al.  Numerical modeling and analysis of micro-porous layer effects in polymer electrolyte fuel cells , 2009 .

[28]  Chaoyang Wang,et al.  Prediction of Dry-Wet-Dry Transition in Polymer Electrolyte Fuel Cells , 2007 .

[29]  Nathan P. Siegel,et al.  Single domain PEMFC model based on agglomerate catalyst geometry , 2003 .

[30]  Shohji Tsushima,et al.  Study of the Effect of Membrane Thickness on the Performance of Polymer Electrolyte Fuel Cells by Water Distribution in a Membrane , 2005 .

[31]  Carl Berger,et al.  Handbook of fuel cell technology , 1968 .

[32]  Fang Wang,et al.  A degradation study of Nafion proton exchange membrane of PEM fuel cells , 2007 .

[33]  John W. Weidner,et al.  Hydrogen Peroxide Formation Rates in a PEMFC Anode and Cathode Effect of Humidity and Temperature , 2020, 2002.09476.

[34]  Chaoyang Wang,et al.  Nonisothermal Modeling of Polymer Electrolyte Fuel Cells II. Parametric Study of Low-Humidity Operation , 2006 .

[35]  Chao-Yang Wang,et al.  Effects of operating and design parameters on PEFC cold start , 2007 .

[36]  Min-Soo Kim,et al.  Characterization of Nitrogen Gas Crossover in PEM Fuel Cell Stacks , 2009 .