Improving performance of organic solar cells using amorphous tungsten oxides as an interfacial buffer layer on transparent anodes

Abstract Thermally evaporated tungsten oxide (WO3) films are investigated as a buffer layer on anodes to improve the performance of bulk-heterojunction solar cells based on poly(3-hexylthiophene) (P3HT) and [6,6]-phenyl C61 butyric acid methyl ester (PCBM-60). Characterization of the WO3 film under study shows that it is amorphous with the conductivity on the order of 10−6 S/cm and can effectively planarize an originally rough ITO surface down to the RMS roughness of 0.88 nm. Insertion of 5–30 nm-thick WO3 layers resulted in power conversion efficiency and fill factor as high as 3.1% and 0.70, respectively, showing an improvement with a good batch-to-batch consistency over conventional cells. The observed improvement is related mainly to the relatively large shunt resistance of WO3-based cells under illumination that is linked to a low carrier recombination resulting in high fill factor and open-circuit voltage.

[1]  H. Sirringhaus,et al.  Integrated optoelectronic devices based on conjugated polymers , 1998, Science.

[2]  Gang Li,et al.  Highly efficient inverted polymer solar cell by low temperature annealing of Cs2CO3 interlayer , 2008 .

[3]  Vishal Shrotriya,et al.  Transition metal oxides as the buffer layer for polymer photovoltaic cells , 2006 .

[4]  Chang Su Kim,et al.  Transparent organic light-emitting diodes consisting of a metal oxide multilayer cathode , 2008 .

[5]  Xiaoping Zhou,et al.  Enhanced Hole Injection into Amorphous Hole-Transport Layers of Organic Light-Emitting Diodes Using Controlled p-Type Doping , 2001 .

[6]  Bernard Kippelen,et al.  Integrated organic photovoltaic modules with a scalable voltage output , 2006 .

[7]  M.J.A. de Voigt,et al.  Stability of the interface between indium-tin-oxide and poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) in polymer light-emitting diodes , 2000 .

[8]  Gao Liu,et al.  Dark spot formation relative to ITO surface roughness for polyfluorene devices , 2004 .

[9]  Valentin D. Mihailetchi,et al.  Charge Transport and Photocurrent Generation in Poly(3‐hexylthiophene): Methanofullerene Bulk‐Heterojunction Solar Cells , 2006 .

[10]  Christoph J. Brabec,et al.  Simulation of light intensity dependent current characteristics of polymer solar cells , 2004 .

[11]  T. Riedl,et al.  Highly efficient simplified organic light emitting diodes , 2007 .

[12]  K. Miyake,et al.  Physical and electrochromic properties of the amorphous and crystalline tungsten oxide thick films prepared under reducing atmosphere , 1984 .

[13]  Xiong Gong,et al.  New Architecture for High‐Efficiency Polymer Photovoltaic Cells Using Solution‐Based Titanium Oxide as an Optical Spacer , 2006 .

[14]  L. S. Roman,et al.  Modeling photocurrent action spectra of photovoltaic devices based on organic thin films , 1999 .

[15]  Chieh-Wei Chen,et al.  High-performance organic thin-film transistors with metal oxide/metal bilayer electrode , 2005 .

[16]  M. Lampert,et al.  Current injection in solids , 1970 .

[17]  Shinuk Cho,et al.  Relationship between the microscopic morphology and the charge transport properties in poly(3-hexylthiophene) field-effect transistors , 2006 .

[18]  B. Kippelen,et al.  Intensity-dependent equivalent circuit parameters of organic solar cells based on pentacene and C60 , 2005 .

[19]  M. N. Kamalasanan,et al.  Effect of interface layer, curing temperature, and polarization on the hole transport in poly(3-hexylthiophene) thin films , 2007 .

[20]  E. W. Meijer,et al.  Two-dimensional charge transport in self-organized, high-mobility conjugated polymers , 1999, Nature.

[21]  Wolfgang Kowalsky,et al.  Highly efficient organic tandem solar cells using an improved connecting architecture , 2007 .

[22]  György Vida,et al.  Characterization of Tungsten Surfaces by Simultaneous Work Function and Secondary Electron Emission Measurements , 2003, Microscopy and Microanalysis.

[23]  Jingze Li,et al.  Enhanced performance of organic light emitting device by insertion of conducting/insulating WO3 anodic buffer layer , 2005 .

[24]  H. Ohta,et al.  Room-temperature fabrication of transparent flexible thin-film transistors using amorphous oxide semiconductors , 2004, Nature.

[25]  N. E. Coates,et al.  Efficient Tandem Polymer Solar Cells Fabricated by All-Solution Processing , 2007, Science.

[26]  G. Malliaras,et al.  Photovoltaic measurement of the built-in potential in organic light emitting diodes and photodiodes , 1998 .

[27]  Stephen R. Forrest,et al.  Very-high-efficiency double-heterostructure copper phthalocyanine/C60 photovoltaic cells , 2001 .

[28]  M. Toney,et al.  Highly oriented crystals at the buried interface in polythiophene thin-film transistors , 2006 .

[29]  Xindong Zhang,et al.  Role of tungsten oxide in inverted polymer solar cells , 2009 .

[30]  Yang Yang,et al.  High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends , 2005 .

[31]  Chun-Sing Lee,et al.  Efficient organic photovoltaic devices using a combination of exciton blocking layer and anodic buffer layer , 2006 .

[32]  Cristian Ionescu-Zanetti,et al.  Semiconductive Polymer Blends: Correlating Structure with Transport Properties at the Nanoscale , 2004 .

[33]  C. Ho,et al.  Investigation of surface energy for organic light emitting polymers and indium tin oxide , 2000 .