Experimental investigation and modelling of WEDM process for machining nano-structured hardfacing material

In recent years, nano-structured hardfacing alloy constituting fine carbides, borides and boro-carbides have become pioneered in modern manufacturing industries due to their superior properties (excellent hardness, toughness and wear resistance) even at elevated temperatures. A nano-structured hardfacing alloy component was produced using manual metal arc welding process for making turning tool insert. The present paper investigates the effect of wire electrical discharge machining (WEDM) parameters such as discharge pulse time, discharge stop time, servo voltage, wire tension and wire feed rate on machining performances viz. material removal rate, machining time and surface roughness after proof-machining of welded nano-structured hardfacing material. Taguchi’s (L25) orthogonal array has been used to perform the experimental runs using conventional brass wire and zinc-coated wire electrodes, respectively. A combination of Taguchi’s robust design concept with principal component analysis has been applied to optimize the process parameters. For brass wire, the optimal settings of the input process parameters corresponds to discharge pulse time 0.45 µs, discharge stop time 8 µs, servo voltage 35 V, wire tension 800 g and wire feed rate 7 m/min, respectively. Similarly, for zinc-coated brass wire, the corresponding settings are discharge pulse time 0.5 µs, discharge stop time 11 µs, servo voltage 41 V, wire tension 600 g and wire feed rate 7 m/min. This paper also establishes the inter-relationships of various WEDM machining parameters and performances by employing response surface methodology-based approach. A confirmation test has also been carried out with the optimal process parameters to conform to the experimental result.

[1]  A. N. Siddiquee,et al.  Wire electrical discharge machining of AA7075/SiC/Al2O3 hybrid composite fabricated by inert gas-assisted electromagnetic stir-casting process , 2014 .

[2]  T. R. Bement,et al.  Taguchi techniques for quality engineering , 1995 .

[3]  Karl Pearson F.R.S..  LIII. On lines and planes of closest fit to systems of points in space , 1901 .

[4]  Zhi Yong Li,et al.  Machining Characteristics of Inconel 718 by Sinking-EDM and Wire-EDM , 2015 .

[5]  Yizhou Sun,et al.  Experimental study on accuracy and surface quality of TC2 in LS-WEDM multiple cuts , 2016 .

[6]  M. S. Shunmugam,et al.  Characteristics of wire-electro discharge machined Ti6Al4V surface , 2004 .

[7]  Mustafa İlhan Gökler,et al.  Experimental investigation of effects of cutting parameters on surface roughness in the WEDM process , 2000 .

[8]  Ajai Jain,et al.  Experimental investigation of spark gap and material removal rate of Al/ZrO2(P)-MMC machined with wire EDM , 2016 .

[9]  Anish Kumar,et al.  Semi-empirical model on MRR and overcut in WEDM process of pure titanium using multi-objective desirability approach , 2015 .

[10]  Jhareswar Maiti,et al.  Modelling robustness for manufacturing processes: a critical review , 2014 .

[11]  Anish Kumar,et al.  MICROSTRUCTURE ANALYSIS AND MATERIAL TRANSFORMATION OF PURE TITANIUM AND TOOL WEAR SURFACE AFTER WIRE ELECTRIC DISCHARGE MACHINING PROCESS , 2014 .

[12]  Wuyi Ming,et al.  Modeling and Optimization of Medium-Speed WEDM Process Parameters for Machining SKD11 , 2013 .

[13]  I. K. Chopde,et al.  Optimization of Wire Electro Discharge Machining Parameters for Improving Surface Finish of Cryo-Treated Tool Steel Using DOE , 2014 .

[14]  Ravindranadh Bobbili,et al.  Effect of Wire-EDM Machining Parameters on Surface Roughness and Material Removal Rate of High Strength Armor Steel , 2013 .

[15]  V. N. Gaitonde,et al.  Effect of electrode material in wire electro discharge machining characteristics of Ti50Ni50−xCux shape memory alloy , 2015 .

[16]  Amit Rai Dixit,et al.  Modeling and Optimization of Machining Nimonic C-263 Superalloy using Multicut Strategy in WEDM , 2016 .

[17]  S. Narendranath,et al.  Evaluation of WEDM performance characteristics of Inconel 706 for turbine disk application , 2015 .

[18]  Kazuo Yamazaki,et al.  WEDM condition parameter optimization for PCD microtool geometry fabrication process and quality improvement , 2012 .

[19]  Amar Patnaik,et al.  Parametric optimization of wire electrical discharge machining (WEDM) process using taguchi method , 2006 .

[20]  Jhareswar Maiti,et al.  Development of a measurement metric for manufacturing process robustness , 2010 .

[21]  Jatinder Kumar,et al.  Optimization of WEDM process of pure titanium with multiple performance characteristics using Taguchi’s DOE approach and utility concept , 2013 .

[22]  B. Yan,et al.  Examination of wire electrical discharge machining of Al2O3p/6061Al composites , 2005 .

[23]  Yunn-Shiuan Liao,et al.  A study on the machining-parameters optimization of wire electrical discharge machining , 1997 .

[24]  Reza Teimouri,et al.  Parametric study along with selection of optimal solutions in dry wire cut machining of cemented tungsten carbide (WC-Co) , 2013 .