论文信息 - Selection Catalogue of Kinematic Configuration for Pick and Place Application

Selection Catalogue of Kinematic Configuration for Pick and Place Application

The goal of this research is to compare all possible configurations of a 3-DOF robot kinematic structure (RRR, RRT, RTR, TRR, RTT, TTR, TRT and TTT) and RRTR SCARA manipulator. All configurations have been scrutinized under various categories including the direct and inverse kinematics, singularity and workspace for the pick and place application. Obtained results allow us to choose the best possible configuration for a given tasks. Model validation of 3- DOF reconfigurable robot can also be done by choosing suitable reconfigurable parameters. This research proves to be a bridge between the current Manufacturing Systems and future Reconfigurable Manufacturing System (RMS).

[1] Benjamin W. Mooring,et al. The effect of kinematic model complexity on manipulator accuracy , 1989, Proceedings, 1989 International Conference on Robotics and Automation.

[2] C. S. G. Lee,et al. Robotics: Control, Sensing, Vision, and Intelligence , 1987 .

[3] Joseph Duffy,et al. Special configurations of spatial mechanisms and robot arms , 1982 .

[4] Sebastian Klug,et al. Design and Application of a 3 DOF Bionic Robot Arm , 2005 .

[5] J. Denavit,et al. A kinematic notation for lower pair mechanisms based on matrices , 1955 .

[6] Damien Chablat,et al. The Kinematic Analysis of a Symmetrical Three-Degree-of-Freedom Planar Parallel Manipulator , 2007, ArXiv.

[7] Ming Z. Huang,et al. A study of workspace and singularity characteristics for design of 3-DOF planar parallel robots , 2010 .

[8] Hoda A. ElMaraghy,et al. Changeable and reconfigurable manufacturing systems , 2009 .

[9] Waguih ElMaraghy,et al. Global Kinematic Model generation for n-DOF reconfigurable machinery structure , 2010, 2010 IEEE International Conference on Automation Science and Engineering.