Experimental Study of the Load Response of Large Diameter Closed-Ended and Open-Ended Pipe Piles Installed in Alluvial Soil

[1]  Rodrigo Salgado,et al.  Resistance Factors for Use in Load and Resistance Factor Design of Driven Pipe Piles in Sands , 2009 .

[2]  Bengt H. Fellenius,et al.  Static loading test on a 45 m long pipe pile in Sandpoint, Idaho , 2004 .

[3]  Armin W. Stuedlein,et al.  Axial load transfer of drilled shaft foundations with and without steel casing , 2017 .

[4]  Rodrigo Salgado,et al.  DETERMINATION OF PILE BASE RESISTANCE IN SANDS , 1999 .

[5]  Rodrigo Salgado,et al.  Static and Dynamic Pile Load Tests on Closed-Ended Driven Pipe Pile , 2018, IFCEE 2018.

[6]  Rodrigo Salgado,et al.  Axial Resistance of Closed-Ended Steel-Pipe Piles Driven in Multilayered Soil , 2017 .

[7]  Kenneth Gavin,et al.  Base load - displacement response of piles in sand , 2007 .

[8]  Bengt H. Fellenius,et al.  Determining the Resistance Distribution in Piles Part 1. Notes on Shift of No-Load Reading and Residual Load , 2002 .

[9]  M. Prezzi,et al.  Comparison of the load response of closed-ended and open-ended pipe piles driven in gravelly sand , 2019, Acta Geotechnica.

[10]  Donald R. Snethen,et al.  Comparison of Settlement Predictions for Single Piles in Sand Based on Penetration Test Results , 1994 .

[11]  Kenichi Soga,et al.  Mechanisms of setup of displacement piles in sand: laboratory creep tests , 2005 .

[12]  Abdallah I. Husein Malkawi,et al.  ESTIMATION OF POST-DRIVING RESIDUAL STRESSES ALONG DRIVEN PILES IN SAND , 2000 .

[13]  Rodrigo Salgado,et al.  Load Testing of a Closed-Ended Pipe Pile Driven in Multilayered Soil , 2009 .

[14]  Malcolm D. Bolton,et al.  Press-in-piling: the installation of instrumented steel tubular piles with and without driving shoes , 2001 .

[15]  Magued Iskander.  On the Design of Instrumented Double-Wall Model Piles Used to Investigate Plugging of Open-Ended Pipe Piles , 2011 .

[16]  Mir A Zaheer,et al.  Load and Resistance Factor Design of Bridge Foundations Accounting for Pile Group–Soil Interaction , 2015 .

[17]  K Karlsrud,et al.  Bearing capacity of driven piles in sand, the NGI approach , 2005 .

[18]  Mark Randolph,et al.  Evaluation of a Minimum Base Resistance for Driven Pipe Piles in Siliceous Sand , 2002 .

[19]  Rodrigo Salgado,et al.  SETUP OF DRIVEN PILES IN LAYERED SOIL , 2010 .

[20]  Murad Y. Abu-Farsakh,et al.  A full-scale field study for performance evaluation of axially loaded large-diameter cylinder piles with pipe piles and PSC piles , 2017 .

[21]  K. Gavin,et al.  BASE RESISTANCE OF JACKED PIPE PILES IN SAND , 2001 .

[22]  James A. Schneider,et al.  The UWA-05 method for prediction of axial capacity of driven piles in sand , 2005 .

[23]  Rodrigo Salgado,et al.  Shaft and base resistance of non-displacement piles in sand , 2017 .

[24]  Mark Randolph,et al.  TENSILE AND COMPRESSIVE SHAFT CAPACITY OF PILES IN SAND , 1993 .

[25]  Richard J. Jardine,et al.  Measurement of stresses around closed-ended displacement piles in sand , 2013 .

[26]  James A. Schneider,et al.  A Review of Design Methods for Offshore Driven Piles in Siliceous Sand , 2005 .

[27]  Jean-Louis Briaud,et al.  Analysis of Pile Load Tests at Lock and Dam 26 , 1989 .

[28]  Rodrigo Salgado,et al.  Instrumentation and axial load testing of displacement piles , 2014 .

[29]  Jean-Louis Briaud,et al.  Piles in Sand: A Method Including Residual Stresses , 1984 .

[30]  Samuel G. Paikowsky,et al.  Performance Evaluation of an Instrumented Test Pile Cluster , 2000 .

[31]  Rodrigo Salgado,et al.  Estimation of Load Capacity of Pipe Piles in Sand Based on Cone Penetration Test Results , 2003 .

[32]  H. J. Kolk,et al.  Design criteria for pipe piles in silica sands , 2005 .

[33]  Barry Lehane,et al.  Friction Coefficients for Piles in Sands and Silts , 1993 .

[34]  M. Prezzi,et al.  Effects of Interface Roughness, Particle Geometry, and Gradation on the Sand–Steel Interface Friction Angle , 2018, Journal of Geotechnical and Geoenvironmental Engineering.

[35]  Rodrigo Salgado,et al.  Closure to “Load and Resistance Factor Design of Drilled Shafts in Sand” by D. Basu and Rodrigo Salgado , 2014 .

[36]  Mir A Zaheer,et al.  Axial resistance of open-ended pipe pile driven in gravelly sand , 2020 .