Aqueous Hybrids of Silica Nanoparticles and Hydrophobically Associating Hydrolyzed Polyacrylamide Used for EOR in High-Temperature and High-Salinity Reservoirs

Water-soluble polymers are known to be used in chemically enhanced oil recovery (EOR) processes, but their applications are limited in high-temperature and high-salinity oil reservoirs because of their inherent poor salt tolerance and weak thermal stability. Hydrophobic association of partially hydrolyzed polyacryamide (HAHPAM) complexed with silica nanoparticles to prepare nano-hybrids is reported in this work. The rheological and enhanced oil recovery (EOR) properties of such hybrids were studied in comparison with HAHPAM under simulated high-temperature and high-salinity oil reservoir conditions ( T : 85 °C; total dissolved solids: 32,868 mg∙L −1 ; [Ca 2+ ] + [Mg 2+ ]: 873 mg∙L −1 ). It was found that the apparent viscosity and elastic modulus of HAHPAM solutions increased with addition of silica nanoparticles, and HAHPAM/silica hybrids exhibit better shear resistance and long-term thermal stability than HAHPAM in synthetic brine. Moreover, core flooding tests show that HAHPAM/silica hybrid has a higher oil recovery factor than HAHPAM solution.

[1]  A. Riga,et al.  Thermal and rheological study of polysaccharides for enhanced oil recovery , 2006 .

[2]  F. Lafuma,et al.  Responsive hybrid self-assemblies in aqueous media. , 2007, Langmuir : the ACS journal of surfaces and colloids.

[3]  L. Brožová,et al.  Molecular dynamics in nanostructured polyimide‐silica hybrid materials and their thermal stability , 1999 .

[4]  I. Simionescu,et al.  Polyacrylamide obtained by plasma-induced polymerization for a possible application in enhanced oil recovery , 1998 .

[5]  F. Lafuma,et al.  Hybrid thickeners in aqueous media , 2006 .

[6]  A. Zaitoun,et al.  Limiting conditions for the use of hydrolyzed polyacrylamides in brines containing divalent ions , 1983 .

[7]  S. Wall,et al.  Coil-to-globule-type transition of poly(N-isopropylacrylamide) adsorbed on colloidal silica particles , 2000, Colloid and Polymer Science.

[8]  Wang Hongyan,et al.  Development and application of dilute surfactant–polymer flooding system for Shengli oilfield , 2009 .

[9]  Yujun Feng,et al.  Association and effective hydrodynamic thickness of hydrophobically associating polyacrylamide through porous media , 2008 .

[10]  J. François,et al.  Hydrolysis of polyacrylamide and acrylic acid-acrylamide copolymers at neutral pH and high temperature , 1988 .

[11]  Yongan Gu,et al.  Application of a Novel Polymer System in Chemical Enhanced Oil Recovery (EOR) , 2003 .

[12]  L. Billon,et al.  Hydrophobically associating polyacrylamides and their partially hydrolyzed derivatives prepared by post-modification. 1. Synthesis and characterization , 2002 .

[13]  D. Schüler,et al.  Synthesis and Characterization , 2009 .

[14]  D. Portehault,et al.  Synthesis and self assembly processes of aqueous thermoresponsive hybrid formulations , 2010 .

[15]  Mu-Hoe Yang.  Rheological Behavior of Polyacrylamide Solution , 1999 .

[16]  Dajun Chen,et al.  Preparation of a novel pH-responsive silver nanoparticle/poly (HEMA-PEGMA-MAA) composite hydrogel , 2007 .

[17]  D. Axelson,et al.  Thermal degradation of polyacrylamide and poly(acrylamide‐co‐acrylate) , 1987 .

[18]  I. Haque,et al.  Characterization of acrylamide polymers for enhanced oil recovery , 2003 .

[19]  Pj Piet Lemstra,et al.  Shear Degradation Resistance of Star Polymers during Elongational Flow , 2005 .

[20]  I. Chung,et al.  Effect of Shear Flow on Polymer Desorption and LAtex Dispersion Stability in the Presence of Adsorbed Polymer , 1991 .

[21]  N. Mungan,et al.  Some Aspects of Polymer Floods , 1966 .

[22]  Z. Zhang,et al.  Microscopic Roles of “Viscoelasticity” in HPMA polymer flooding for EOR , 2011 .

[23]  Peter H. Doe,et al.  Polymer flooding review , 1987 .

[24]  X. Yue,et al.  Mechanism for Viscoelastic Polymer Solution Percolating through Porous Media , 2007 .

[25]  Qi Wang,et al.  Preparation of conductive polyaniline/nanosilica particle composites through ultrasonic irradiation , 2003 .

[26]  G. Medjahdi,et al.  Aqueous solutions of acrylamide-acrylic acid copolymers: stability in the presence of alkalinoearth cations , 1997 .

[27]  S. Minko,et al.  Gold‐Nanoparticle‐Enhanced Plasmonic Effects in a Responsive Polymer Gel , 2008, Advanced materials.

[28]  Yujun Feng,et al.  Study on Associative Polymerizable Inverse Microemulsion , 2008 .

[29]  Antonius Broekhuis,et al.  Polymers for enhanced oil recovery: A paradigm for structure–property relationship in aqueous solution , 2011 .

[30]  정재철.  Rheology and Polymer Flooding Characteristics of Partially Hydrolyzed Polyacrylamide for Enhanced Heavy Oil Recovery , 2012 .

[31]  Kenneth Stuart Sorbie,et al.  Polymer-improved oil recovery , 1991 .