Optimization of transverse shear moduli for composite honeycomb cores

Effective transverse shear moduli of composite honeycomb cores are important material properties in analysis and design of sandwich structures. Based on a combined multi-objective optimization and homogenization approach, effective transverse shear moduli for composite honeycomb cores are optimized in this paper. An analytical approach using a two-scale homogenization technique is adopted to predict the effective transverse shear stiffnesses of thin-walled composite honeycomb cores with general configurations, and explicit formulas are given for three typical honeycomb cores consisting of sinusoidal, tubular, and hexagonal geometries. To maximize the performance of transverse shear behavior, a multi-objective method is employed to obtain optimal designs of periodic cellular cores. By assigning equal weighting (or penalty) factors to the transverse shear stiffnesses, the overall shear stiffness parameter is optimized. The optimization problem is solved using a sequential quadratic programming algorithm. The geometric and weighting factor effects on the optimal designs for the three cellular cores considered in this study are evaluated and discussed. An optimization procedure using finite element analysis and a response surface algorithm is also conducted to verify the proposed approach. The present combined homogenization and multi-objective optimization approach can be used to maximize transverse shear material properties of composite honeycomb structures.

[1]  E. Hinton,et al.  A review of homogenization and topology optimization III—topology optimization using optimality criteria , 1998 .

[2]  Engineering mechanics of composite structures , 1993 .

[3]  W. Becker,et al.  Effective elastic properties of hexagonal and quadrilateral grid structures , 1999 .

[4]  Alexander L. Kalamkarov,et al.  Composite and Reinforced Elements of Construction , 1992 .

[5]  A. Bensoussan,et al.  Asymptotic analysis for periodic structures , 1979 .

[6]  T. Lu,et al.  Design optimization of truss-cored sandwiches with homogenization , 2006 .

[7]  Frank W. Zok,et al.  Design of Sandwich Panels With Prismatic Cores , 2006 .

[8]  S. Kelsey,et al.  The Shear Modulus of Foil Honeycomb Cores , 1958 .

[9]  George E. P. Box,et al.  Empirical Model‐Building and Response Surfaces , 1988 .

[10]  Julio F. Davalos,et al.  Modeling and characterization of fiber-reinforced plastic honeycomb sandwich panels for highway bridge applications , 2001 .

[11]  R. Fletcher.  Practical Methods of Optimization , 1988 .

[12]  Julio F. Davalos,et al.  Multiobjective material architecture optimization of pultruded FRP I-beams , 1996 .

[13]  Guangyu Shi,et al.  Equivalent transverse shear stiffness of honeycomb cores , 1995 .

[14]  Amjad J. Aref,et al.  An optimization design procedure for fiber reinforced polymer web-core sandwich bridge deck systems , 2003 .

[15]  Julio F. Davalos,et al.  TRANSVERSE SHEAR STIFFNESS OF COMPOSITE HONEYCOMB CORE WITH GENERAL CONFIGURATION , 2001 .

[16]  Pizhong Qiao,et al.  Transverse Shear Stiffness of Composite Honeycomb Cores and Efficiency of Material , 2005 .

[17]  Julio F. Davalos,et al.  Design Optimization of Fiber Reinforced Plastic Composite Shapes , 1998 .

[18]  R. Haftka,et al.  Elements of Structural Optimization , 1984 .

[19]  John W. Hutchinson,et al.  Optimal truss plates , 2001 .

[20]  S. Torquato,et al.  Design of materials with extreme thermal expansion using a three-phase topology optimization method , 1997 .

[21]  Noboru Kikuchi,et al.  TOPOLOGY OPTIMIZATION OF COMPLIANT MECHANISMS USING THE HOMOGENIZATION METHOD , 1998 .

[22]  P. Qiao,et al.  Mechanics of Composite Sinusoidal Honeycomb Cores , 2005 .

[23]  Sarp Adali,et al.  Minimum weight and deflection design of thick sandwich laminates via symbolic computation , 1994 .

[24]  Michel Grédiac,et al.  A finite element study of the transverse shear in honeycomb cores , 1993 .

[25]  M. Ashby,et al.  Cellular solids: Structure & properties , 1988 .