Prototype Development of a Parallel-Link Robot Actuated by Pneumatic Linear Drives with Variable Inclination Mechanisms

[1]  Toshiro Noritsugu,et al.  Positioning Control of Pneumatic Parallel Manipulator , 2008, Int. J. Autom. Technol..

[2]  Tatsuo Arai,et al.  Parallel mechanisms with adjustable link parameters , 2000, Proceedings. 2000 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2000) (Cat. No.00CH37113).

[3]  Takahiro Kosaki,et al.  Design of a Pressure Observer and its Application to a Low-Cost Pneumatic Control System , 2011, Int. J. Autom. Technol..

[4]  P. Cappa,et al.  Experimental validation of an impedance controlled parallel robot for postural rehabilitation , 2012, 2012 4th IEEE RAS & EMBS International Conference on Biomedical Robotics and Biomechatronics (BioRob).

[5]  Masahiro Takaiwa,et al.  Wrist rehabilitaion equipment using pneumatic parallel manipulator , 2010, 2010 World Automation Congress.

[6]  Toshiro Noritsugu,et al.  Development of Pneumatic Human Interface and its Application to Compliance Display , 2001, J. Robotics Mechatronics.

[7]  Tatsuo Arai,et al.  Mechanism configuration evaluation of a linear-actuated parallel mechanism using manipulability , 2002, Proceedings 2002 IEEE International Conference on Robotics and Automation (Cat. No.02CH37292).

[8]  Takaaki Oiwa.  Precision Mechanisms Based on Parallel Kinematics , 2010, Int. J. Autom. Technol..

[9]  D. Stewart,et al.  A Platform with Six Degrees of Freedom , 1965 .

[10]  Kazuya Hirose,et al.  Kinematic Analysis and Design of 3-RPSR Parallel Mechanism with Triple Revolute Joints on the Base , 2010, Int. J. Autom. Technol..

[11]  Yongsheng Zhao,et al.  System debugging and experimental analysis of the 6-PUS/UPU parallel manipulator , 2010, 2010 International Conference on Computer, Mechatronics, Control and Electronic Engineering.

[12]  T. Arai,et al.  Workspace analysis of parallel mechanism with adjustable link parameters , 2005, ICAR '05. Proceedings., 12th International Conference on Advanced Robotics, 2005..

[13]  Yutaka Tanaka,et al.  Design of a Six Degree-of-Freedom Tripod Parallel Mechanism for Flight Simulators , 2011, Int. J. Autom. Technol..

[14]  Lining Sun,et al.  Dynamic dimensional synthesis of a precision 6-DOF parallel manipulator , 2012, 2012 IEEE International Conference on Mechatronics and Automation.

[15]  Yutaka Tanaka,et al.  Development of Pneumatic Parallel Force Feedback , 2010, Int. J. Autom. Technol..

[16]  Tatsuo Arai,et al.  Specific kinematic changes in a linear-actuated parallel mechanism according to differences in actuator arrangement , 2000, Proceedings. 2000 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2000) (Cat. No.00CH37113).

[17]  Takahiro Kosaki,et al.  An Observer-Based Friction Compensation Technique for Positioning Control of a Pneumatic Servo System , 2009 .