Paper-Based, Hand-Drawn Free Chlorine Sensor with Poly(3,4-ethylenedioxythiophene):Poly(styrenesulfonate).

The concentration of free chlorine used for disinfecting drinking water, recreational water, and food processing water is critical for environmental and human health conditions, and should be controlled within stipulated ranges. This report, for the first time, describes a paper-based electrochemical free chlorine sensor fabricated by hand-drawing. The electrical resistivity of a poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) chemoresistor increases when it is exposed to free chlorine in water due to oxidation reactions. Because the relative change of the electrical resistance represents the sensor's response, the sensor can be fabricated by hand-drawing with different shapes and dimensions. The fabrication steps are all at room temperature, require no instrumentation or equipment, and can be carried out by untrained personnel. The fabricated sensor is mechanically stable, reusable, has a wide sensing range, and can accurately measure free chlorine concentrations in real water samples. Therefore, the low-cost, hand-drawn free chlorine sensor is of great significance for water quality monitoring in less developed areas where fabrication facilities, analytical equipment, and trained personnel are limited, but the need for analytical devices is critical. In addition to the free chlorine sensor demonstrated in this study, other types of PEDOT:PSS-based sensors and electronic devices can be fabricated by the developed hand-drawing process.

[1]  P. Blom,et al.  Disruption of the electrical conductivity of highly conductive poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) by hypochlorite. , 2013, The journal of physical chemistry. B.

[2]  Rebecca Richards-Kortum,et al.  Highly Sensitive Two-Dimensional Paper Network Incorporating Biotin-Streptavidin for the Detection of Malaria. , 2016, Analytical chemistry.

[3]  Yibin Ying,et al.  Writing Sensors on Solid Agricultural Products for In Situ Detection. , 2015, Analytical chemistry.

[4]  Katherine E. Boehle,et al.  Electrochemistry on Paper‐based Analytical Devices: A Review , 2016 .

[5]  Richard M Crooks,et al.  Detection of hepatitis B virus DNA with a paper electrochemical sensor. , 2015, Analytical chemistry.

[6]  Jingkun Xu,et al.  Effective Approaches to Improve the Electrical Conductivity of PEDOT:PSS: A Review , 2015 .

[7]  Zhongze Gu,et al.  Patterned Photonic Nitrocellulose for Pseudo-Paper Microfluidics. , 2016, Analytical chemistry.

[8]  Snober Ahmed,et al.  Paper-based chemical and biological sensors: Engineering aspects. , 2016, Biosensors & bioelectronics.

[9]  Matiar M. R. Howlader,et al.  Inkjet Printing of a Highly Loaded Palladium Ink for Integrated, Low‐Cost pH Sensors , 2016 .

[10]  Leslie Y Yeo,et al.  Paper-based microfluidic surface acoustic wave sample delivery and ionization source for rapid and sensitive ambient mass spectrometry. , 2011, Analytical chemistry.

[11]  M. J. Deen,et al.  Electrical characterization of semiconductor materials and devices—review , 2006 .

[12]  J. Olkkonen,et al.  Flexographically printed fluidic structures in paper. , 2010, Analytical chemistry.

[13]  K. Ho,et al.  Highly conductive PEDOT:PSS electrode by simple film treatment with methanol for ITO-free polymer solar cells , 2012 .

[14]  Jing Zhao,et al.  Bioinspired Electronic Whisker Arrays by Pencil‐Drawn Paper for Adaptive Tactile Sensing , 2016 .

[15]  Matiar M. R. Howlader,et al.  Inkjet-printed bifunctional carbon nanotubes for pH sensing , 2016 .

[16]  David R. Liu,et al.  Analytical Devices Based on Direct Synthesis of DNA on Paper. , 2016, Analytical chemistry.

[17]  Jin Si,et al.  Fabrication techniques for microfluidic paper-based analytical devices and their applications for biological testing: A review. , 2016, Biosensors & bioelectronics.

[18]  Yiheng Qin,et al.  Microfabricated electrochemical pH and free chlorine sensors for water quality monitoring: recent advances and research challenges , 2015 .

[19]  Wansun Kim,et al.  Instrument-Free Synthesizable Fabrication of Label-Free Optical Biosensing Paper Strips for the Early Detection of Infectious Keratoconjunctivitides. , 2016, Analytical chemistry.

[20]  G. Whitesides,et al.  Paper-based potentiometric ion sensing. , 2014, Analytical chemistry.

[21]  Tian Jian Lu,et al.  Recent Advances in Pen‐Based Writing Electronics and their Emerging Applications , 2016 .

[22]  G. Barbarella,et al.  FROM EASILY OXIDIZED TO EASILY REDUCED THIOPHENE-BASED MATERIALS , 1998 .

[23]  Junghwi Lee,et al.  Fully Drawn All‐Organic Flexible Transistors Prepared by Capillary Pen Printing on Flexible Planar and Curvilinear Substrates , 2015 .

[24]  Jie Hu,et al.  Polydimethylsiloxane-Paper Hybrid Lateral Flow Assay for Highly Sensitive Point-of-Care Nucleic Acid Testing. , 2016, Analytical chemistry.

[25]  K. Walus,et al.  Paper as a platform for sensing applications and other devices: a review. , 2015, ACS applied materials & interfaces.

[26]  Eric Bakker,et al.  Paper-based thin-layer coulometric sensor for halide determination. , 2015, Analytical chemistry.

[27]  Wenzhao Jia,et al.  Biocompatible Enzymatic Roller Pens for Direct Writing of Biocatalytic Materials: “Do‐it‐Yourself” Electrochemical Biosensors , 2015, Advanced healthcare materials.