Processing–Morphology–Property Relationships and Composite Theory Analysis of Reduced Graphene Oxide/Natural Rubber Nanocomposites

Dispersion of reduced graphene oxide (RG-O) into natural rubber (NR) was found to dramatically enhance the mechanical, electrical, and thermal properties of NR. However, property improvements were strongly dependent upon the processing history and nanocomposite morphology. Co-coagulating a stable RG-O suspension with NR latex afforded a weblike morphology consisting of platelet networks between the latex particles, while two-roll mill processing broke down this structure, yielding a homogeneous and improved dispersion. The physical properties of RG-O/NR vulcanizates with both morphologies were compared over a range of loadings; it was found that the network morphology was highly beneficial for thermal and electrical conductivity properties and greatly increased stiffness but was detrimental to elongation. A detailed comparative analysis of composite models found the Guth equation gave excellent fit to modulus data of the milled samples when taking the shape factor as equal to the platelet aspect ratio qua...

[1]  Frederick R. Eirich,et al.  Science and Technology of Rubber , 2012 .

[2]  Ilhan A. Aksay,et al.  Multifunctional elastomer nanocomposites with functionalized graphene single sheets , 2012 .

[3]  I. Aksay,et al.  Strain-induced crystallization and mechanical properties of functionalized graphene sheet-filled natural rubber , 2012 .

[4]  Julia A. King,et al.  Characterization of exfoliated graphite nanoplatelets/polycarbonate composites: electrical and thermal conductivity, and tensile, flexural, and rheological properties , 2012 .

[5]  R. Ruoff,et al.  Microwave-Exfoliated Graphite Oxide/Polycarbonate Composites , 2011 .

[6]  N. Yan,et al.  Dispersion and Exfoliation of Graphene in Rubber by an Ultrasonically‐Assisted Latex Mixing and In situ Reduction Process , 2011 .

[7]  R. Ruoff,et al.  Graphene-based polymer nanocomposites , 2011 .

[8]  R. Piner,et al.  Mechanical properties of monolayer graphene oxide. , 2010, ACS nano.

[9]  C. Macosko,et al.  Graphene/Polymer Nanocomposites , 2010 .

[10]  Yang Shen,et al.  Physical Properties of Composites Near Percolation , 2010 .

[11]  W. Bauhofer,et al.  A review and analysis of electrical percolation in carbon nanotube polymer composites , 2009 .

[12]  R. Ruoff,et al.  Chemical methods for the production of graphenes. , 2009, Nature nanotechnology.

[13]  Inhwa Jung,et al.  Colloidal suspensions of highly reduced graphene oxide in a wide variety of organic solvents. , 2009, Nano letters.

[14]  L. Robeson,et al.  Polymer nanotechnology: Nanocomposites , 2008 .

[15]  R. Magaraphan,et al.  Prevulcanized natural rubber latex/clay aerogel nanocomposites , 2008 .

[16]  Klaus Kern,et al.  Elastic properties of chemically derived single graphene sheets. , 2008, Nano letters.

[17]  C. Macosko,et al.  Morphology and Properties of Polyester/Exfoliated Graphite Nanocomposites , 2008 .

[18]  G. Wallace,et al.  Processable aqueous dispersions of graphene nanosheets. , 2008, Nature nanotechnology.

[19]  F. Galembeck,et al.  Preparation of natural rubber–montmorillonite nanocomposite in aqueous medium: evidence for polymer–platelet adhesion , 2006 .

[20]  Xiaorong Wang,et al.  Strain-induced nonlinearity of filled rubbers. , 2005, Physical review. E, Statistical, nonlinear, and soft matter physics.

[21]  L. Schadler,et al.  Quantitative equivalence between polymer nanocomposites and thin polymer films , 2005, Nature materials.

[22]  Liqun Zhang,et al.  Rubber-pristine clay nanocomposites prepared by co-coagulating rubber latex and clay aqueous suspension , 2005 .

[23]  Liqun Zhang,et al.  Modeling Young’s modulus of rubber–clay nanocomposites using composite theories , 2004 .

[24]  L. Bokobza.  The Reinforcement of Elastomeric Networks by Fillers , 2004 .

[25]  T. D. Fornes,et al.  Modeling properties of nylon 6/clay nanocomposites using composite theories , 2003 .

[26]  J. Karger‐Kocsis,et al.  Natural rubber-based nanocomposites by latex compounding with layered silicates , 2003 .

[27]  M. Arroyo,et al.  Organo-montmorillonite as substitute of carbon black in natural rubber compounds , 2003 .

[28]  R. Krishnamoorti,et al.  Rheology of polymer layered silicate nanocomposites , 2001 .

[29]  Liqun Zhang,et al.  Preparation and characterization of Rubber-Clay nanocomposites , 2000 .

[30]  Yizhong Wang,et al.  Morphology and mechanical properties of clay/styrene‐butadiene rubber nanocomposites , 2000 .

[31]  M. C. Wilkinson,et al.  An overview of polymer latex film formation and properties. , 2000, Advances in colloid and interface science.

[32]  Jack F. Douglas,et al.  Model for the Viscosity of Particle Dispersions , 1999 .

[33]  Mary C. Boyce,et al.  Mechanical Behavior of Particle Filled Elastomers , 1999 .

[34]  Charles L. Tucker,et al.  Stiffness Predictions for Unidirectional Short-Fiber Composites: Review and Evaluation , 1999 .

[35]  C. Hui,et al.  An interface model for the prediction of Young's modulus of layered silicate‐elastomer nanocomposites , 1998 .

[36]  T. Vu-khanh,et al.  Extrusion of Mica Filled Polypropylene , 1988 .

[37]  G. P. Tandon,et al.  The effect of aspect ratio of inclusions on the elastic properties of unidirectionally aligned composites , 1984 .

[38]  K. Tanaka,et al.  Average stress in matrix and average elastic energy of materials with misfitting inclusions , 1973 .

[39]  L. Mullins.  Softening of Rubber by Deformation , 1969 .

[40]  L. Mullins,et al.  Stress softening in rubber vulcanizates. Part I. Use of a strain amplification factor to describe the elastic behavior of filler‐reinforced vulcanized rubber , 1965 .

[41]  A. R. Payne.  The Dynamic Properties of Carbon Black-Loaded Natural Rubber Vulcanizates. Part I , 1963 .

[42]  E. Guth.  Theory of Filler Reinforcement , 1945 .

[43]  R. Ruoff,et al.  The chemistry of graphene oxide. , 2010, Chemical Society reviews.

[44]  M. Galimberti,et al.  Rubber-clay-nanocomposites , 2009 .

[45]  Rodney D. Priestley,et al.  Model polymer nanocomposites provide an understanding of confinement effects in real nanocomposites. , 2007, Nature materials.

[46]  Christopher J. Ellison,et al.  The distribution of glass-transition temperatures in nanoscopically confined glass formers , 2003, Nature materials.

[47]  J. Donnet,et al.  Carbon black: Physics, chemistry, and elastomer reinforcement , 1976 .