Directions for development of the field of electroactive polymer (EAP)

In last few years, the rate of development and advances in the field of EAP has accelerated significantly and it is increasingly getting closer to the point of finding them used in commercial products. Substantial development has been reported in the understanding of their drive mechanisms and the parameters that control their electro-activation behavior. Further, efforts are being made to develop mass production techniques with greatly improved actuation capability and operation durability. The recent efforts to develop energy harvesting techniques, haptic interfacing (including refreshable braille displays), and toys are further increasing the likelihood of finding niches for these materials. In this paper, the author sought to examine the potential directions for the future development of the field of EAP in relation to the state-of-the-art.

[1]  Yoseph Bar-Cohen,et al.  Biomimetics : Biologically Inspired Technologies , 2011 .

[2]  Helmut F. Schlaak,et al.  Tactile display with dielectric multilayer elastomer actuatorsq , 2009, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[3]  Yoseph Bar-Cohen,et al.  Biologically inspired intelligent robots , 2003, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[4]  Yoseph Bar-Cohen,et al.  The Coming Robot Revolution: Expectations and Fears About Emerging Intelligent, Humanlike Machines , 2009 .

[5]  D. De Rossi,et al.  Steerable Microcatheters Actuated by Embedded Conducting Polymer Structures , 1996 .

[6]  Bin Chen,et al.  Large-strain, rigid-to-rigid deformation of bistable electroactive polymers , 2009 .

[7]  Hugh M. Herr,et al.  New horizons for orthotic and prosthetic technology: artificial muscle for ambulation , 2004, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[8]  Jerald D. Kralik,et al.  Real-time prediction of hand trajectory by ensembles of cortical neurons in primates , 2000, Nature.

[9]  T. Someya,et al.  Sheet-Type Braille Displays by Integrating Organic Field-Effect Transistors and Polymeric Actuators , 2007, IEEE Transactions on Electron Devices.

[10]  A. Wong-Foy,et al.  Force requirements for artificial muscle to create an eyelid blink with eyelid sling. , 2010, Archives of facial plastic surgery.

[11]  Danilo De Rossi,et al.  Electroactive Elastomeric Haptic Displays of Organ Motility and Tissue Compliance for Medical Training and Surgical Force Feedback , 2009, IEEE Transactions on Biomedical Engineering.

[12]  N. Di Spigna,et al.  Application of EAP materials toward a refreshable Braille display , 2009, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[13]  Ja Choon Koo,et al.  A Braille Display System for the Visually Disabled Using a Polymer Based Soft Actuator , 2009 .

[14]  Sheng Liu,et al.  A compact electroactive polymer actuator suitable for refreshable Braille display , 2007, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[15]  Y. Cohen.  Electroactive Polymer (EAP) Actuators as Artificial Muscles - Reality , 2001 .

[16]  Yoseph Bar-Cohen,et al.  Biomimetics: Nature-Based Innovation , 2011 .