Hot Workability and Processing Maps of 7150 Aluminum Alloys with Zr and V Additions

[1]  J. Lai,et al.  Effects of V addition on recrystallization resistance of 7150 aluminum alloy after simulative hot deformation , 2014 .

[2]  X. Chen,et al.  Effect of vanadium on hot deformation and microstructural evolution of 7150 aluminum alloy , 2014 .

[3]  X. Chen,et al.  Effect of Zr addition on hot deformation behavior and microstructural evolution of AA7150 aluminum alloy , 2014 .

[4]  K. P. Rao,et al.  High Temperature Deformation and Microstructural Features of TXA321 Magnesium Alloy: Correlations with Processing Map , 2013 .

[5]  W. Mao,et al.  Evolution of activation energy during hot deformation of AA7150 aluminum alloy , 2013 .

[6]  Ying Han,et al.  Deformation behavior and microstructural evolution of as-cast 904L austenitic stainless steel during hot compression , 2013 .

[7]  J. Cui,et al.  Effect of trace element vanadium on superplasticity of 5083 aluminium alloy sheets , 2012 .

[8]  Miaoquan Li,et al.  The correlation between flow behavior and microstructural evolution of 7050 aluminum alloy , 2011 .

[9]  E. Evangelista.  Hot Deformation and Processing of Aluminum Alloys , 2011 .

[10]  D. Caillard,et al.  Thermally Activated Mechanisms in Crystal Plasticity , 2011 .

[11]  Y. Li,et al.  Deformation behavior of an Al–Cu–Mg–Mn–Zr alloy during hot compression , 2011 .

[12]  S. P. Narayan,et al.  Compressive deformation behavior of Al 2024 alloy using 2D and 4D processing maps , 2011 .

[13]  S. Ramanathan,et al.  Hot deformation behaviour of 7075 alloy , 2011 .

[14]  E. F. Kazakova,et al.  A study of rapidly hardened aluminum alloys with iron and vanadium , 2009 .

[15]  G. Neumann,et al.  Self-diffusion and Impurity Diffusion in Pure Metals: Handbook of Experimental Data , 2008 .

[16]  Q. Pan,et al.  Microstructures and tensile properties of Al-Zn-Cu-Mg-Zr alloys modified with scandium , 2008 .

[17]  W. Soer,et al.  Deformation and reconstruction mechanisms in coarse-grained superplastic Al-Mg alloys , 2006 .

[18]  L. Klein,et al.  Preparation of nanoporous silica–zirconia layers by in situ sol–gel method , 2006 .

[19]  D. Seidman,et al.  Criteria for developing castable, creep-resistant aluminum-based alloys – A review , 2006 .

[20]  S. Ramanathan,et al.  Hot Deformation Behavior of 2124 Al Alloy , 2006 .

[21]  R. Karthikeyan,et al.  Development of processing map for 6061 Al/15% SiCp through neural networks , 2005 .

[22]  J. Robson.  A new model for prediction of dispersoid precipitation in aluminium alloys containing zirconium and scandium , 2004 .

[23]  Uday S. Dixit,et al.  Application of neural networks in generating processing map for hot working , 2003 .

[24]  M. E. Kassner,et al.  Creep cavitation in metals , 2003 .

[25]  D. Miracle,et al.  Microstructure and Mechanical Properties of Cast and Wrought Al-Zn-Mg-Cu Alloys Modified with Zr and Sc , 2002 .

[26]  O. Engler,et al.  Influence of deformation variables on the formation of copper-type shear bands in Al–1Mg , 2001 .

[27]  C. Maurice,et al.  The influence of Al3Zr dispersoids on the recrystallization of hot-deformed AA 7010 alloys , 2001 .

[28]  Joseph D. Robson,et al.  Dispersoid precipitation and process modelling in zirconium containing commercial aluminium alloys , 2001 .

[29]  J. Jonas,et al.  Solute drag effects during the dynamic recrystallization of nickel , 1999 .

[30]  C. Boothroyd,et al.  Grain refinement by Al-Ti-B alloys in aluminium melts: a study of the mechanisms of poisoning by zirconium , 1999 .

[31]  Zhongmin Xiao,et al.  Contact zone in an interfacial Zener-Stroh crack , 1998 .

[32]  Yellapregeda Prasad V.R.K.,et al.  Hot Working Guide: A Compendium of Processing Maps , 1997 .

[33]  J. T. Staley,et al.  Application of modern aluminum alloys to aircraft , 1996 .

[34]  F. J. Humphreys,et al.  Recrystallization and Related Annealing Phenomena , 1995 .

[35]  Y. Tsuji,et al.  Effects of Vanadium and Chromium Addition on S′-Phase Precipitation in a 2091 Aluminium Alloy , 1995 .

[36]  H. Iizuka,et al.  On the initiation of wedge-type cracks at grain-boundary triple junctions during high-temperature creep , 1985 .

[37]  S. M. Doraivelu,et al.  Modeling of dynamic material behavior in hot deformation: Forging of Ti-6242 , 1984 .

[38]  W. Hutchinson,et al.  Recrystallisation mechanisms and the origin of cube texture in copper , 1982 .

[39]  R. Honeycombe,et al.  Plastic Deformation of Metals , 1932, Nature.