A practical approach to power factor definitions: transmission losses, reactive power compensation, and machine utilization

This paper presents an analysis of some of the definitions of power factor as applied to nonlinear and unbalanced systems and gives alternatives to the use of a single power factor. The three most important practical functions of power factor for linear balanced circuits are the computation of the increment in the transmission losses, the computation of the required reactive compensation and the information to specify (or design) machines. So far, the three have not been considered simultaneously for nonlinear and unbalanced circuits. In the paper we show that, for the general case, the three purposes cannot be achieved consistently with only one power factor. We propose alternatives that are completely general and applicable to linear and/or nonlinear, balanced and/or unbalanced circuits. In addition, we present a strategy for the optimal reactive compensation that yields the minimum transmission losses

[1]  Aleksandar M. Stankovic,et al.  Hilbert space techniques for modeling and compensation of reactive power in energy processing systems , 2003 .

[2]  A. E. Emanuel,et al.  On the definition of power factor and apparent power in unbalanced polyphase circuits with sinusoidal voltage and currents , 1993 .

[3]  A. A. Girgis,et al.  Evaluating Power System Unbalance in the Presence of Harmonic Distortion , 2002, IEEE Power Engineering Review.

[4]  Jan-Harm Pretorius,et al.  An evaluation of some alternative methods of power resolution in a large industrial plant , 2000 .

[5]  L. Czarnecki.  What is wrong with the Budeanu concept of reactive and distortion power and why it should be abandoned , 1987, IEEE Transactions on Instrumentation and Measurement.

[6]  Neville R. Watson,et al.  Power System Quality Assessment , 2000 .

[7]  A.E. Emanuel,et al.  Summary of IEEE standard 1459: definitions for the measurement of electric power quantities under sinusoidal, nonsinusoidal, balanced, or unbalanced conditions , 2004, IEEE Transactions on Industry Applications.

[8]  P. Salmeron,et al.  Instantaneous power components in polyphase systems under nonsinusoidal conditions , 1996 .

[9]  F. Ghassemi.  New concept in AC power theory , 2000 .

[10]  Yahia Baghzouz,et al.  Discussion of power definitions contained in the IEEE Dictionary , 1994 .

[11]  L.S. Czarnecki,et al.  On some misinterpretations of the instantaneous reactive power p-q theory , 2004, IEEE Transactions on Power Electronics.

[12]  W. H. Pratt.  Power Factor in Polyphase Circuits , 1920, Transactions of the American Institute of Electrical Engineers.

[13]  Leszek S. Czarnecki,et al.  Misinterpretations of some power properties of electric circuits , 1994 .

[14]  J.L. Willems,et al.  Reflections on apparent power and power factor in nonsinusoidal and polyphase situations , 2004, IEEE Transactions on Power Delivery.

[15]  Leszek S. Czarnecki,et al.  Considerations on the Reactive Power in Nonsinusoidal Situations , 1985, IEEE Transactions on Instrumentation and Measurement.

[16]  W. Shepherd,et al.  Energy flow and power factor in nonsinusoidal circuits , 1979 .

[17]  Seong-Jeub Jeon,et al.  Definitions of apparent power and power factor in a power system having transmission lines with unequal resistances , 2005 .

[18]  Leszek S. Czarnecki.  Comments on active power flow and energy accounts in electrical systems with nonsinusoidal waveforms and asymmetry , 1996 .

[19]  A. E. Emanuel.  The Buchholz-Goodhue apparent power definition: the practical approach for nonsinusoidal and unbalanced systems , 1998 .

[20]  E. Wilczynski,et al.  Total apparent power of the electrical system for periodic, deformed waveforms , 2000 .

[21]  A. E. Emanuel,et al.  Practical definitions for powers in systems with nonsinusoidal waveforms and unbalanced loads: a discussion , 1996 .

[22]  Ching-Lien Huang,et al.  Power-component definitions and measurements for a harmonic-polluted power circuit , 1991 .

[23]  T. H. Fu,et al.  Load Characteristics Analysis of AC and DC Arc Furnaces Using Various Power Definitions and Statistic Method , 2002, IEEE Power Engineering Review.

[24]  F. de Leon,et al.  Physical time domain representation of powers in linear and nonlinear electrical circuits , 1999, IEEE Power Engineering Society. 1999 Winter Meeting (Cat. No.99CH36233).

[25]  Trial-Use Standard De fi nitions for the Measurement of Electric Power Quantities Under Sinusoidal , Nonsinusoidal , Balanced , or Unbalanced Conditions , 2001 .

[26]  L. W. Pierce.  Transformer design and application considerations for nonsinusoidal load currents , 1995 .

[27]  W. V. Lyon.  Reactive Power and Power Factor , 1933, Transactions of the American Institute of Electrical Engineers.

[28]  A.E. Emanuel,et al.  The apparent power concept and the IEEE standard 1459-2000 , 2005, IEEE Transactions on Power Delivery.

[29]  Leszek S. Czarnecki,et al.  Power related phenomena in three-phase unbalanced systems , 1995 .

[30]  D. Sharon,et al.  Power factor definitions and power transfer quality in nonsinusoidal situations , 1996 .

[31]  L. S. Czarnecki.  Minimization of reactive power under nonsinusoidal conditions , 1987, IEEE Transactions on Instrumentation and Measurement.

[32]  A. E. Emanuel.  Powers in nonsinusoidal situations-a review of definitions and physical meaning , 1990 .

[33]  Alessandro Ferrero,et al.  A new approach to the definition of power components in three-phase systems under nonsinusoidal conditions , 1991 .

[34]  D. Sharon.  Reactive-power definitions and power-factor improvement in nonlinear systems , 1974 .