Evaluation of crashworthiness of a carbon-fibre-reinforced polymer (CFRP) ladder frame in a body-on-frame vehicle

This paper investigates the opportunities of lightweighting a steel ladder frame, which is a primary structural component in a body-on-frame vehicle, using a carbon-fibre-reinforced polymer (CFRP) composite. The finite element (FE) model of a 2007 Chevrolet Silverado, which is a body-on-frame pickup truck, is selected as a baseline. The steel ladder frame of the baseline vehicle is replaced with a CFRP ladder frame. A two-dimensional triaxial carbon-thermoset-braided composite is utilised as the substitute for steel. The structural performance of the CFRP ladder frame is evaluated by FE simulations of stiffness tests and frontal impact tests. The results show that the CFRP ladder frame with twice the thickness of the original frame rails can provide a similar performance to the original steel ladder frame in terms of its stiffness and impact energy absorbing capability. Consequently, the weight reduction of the original steel ladder frame reaches up to 32% in the CFRP ladder frame.

[1]  Asami Nakai,et al.  Axial crushing performance of braided composite tubes , 2005 .

[2]  Cing-Dao Kan,et al.  Investigation of Opportunities for Lightweight Vehicles Using Advanced Plastics and Composites , 2012 .

[3]  William T. Hollowell,et al.  NHTSA's research programme for vehicle agressivity and fleet compatability , 2001 .

[4]  Pradeep Mohan,et al.  Finite Element Analysis of Compatibility Metrics in Frontal Collisions , 2007 .

[5]  Nancy L. Johnson,et al.  Development of a Cost Competitive, Composite Intensive, Body-in-White , 2002 .

[6]  Richard M. Morgan,et al.  Structural attributes of the striking vehicle that control aggressivity toward the struck-vehicle in frontal collisions , 2009 .

[7]  Bankim Chandra Ray,et al.  Effects of loading speed on the failure behaviour of FRP composites , 2007, Aircraft Engineering and Aerospace Technology.

[8]  D. Hull,et al.  A unified approach to progressive crushing of fibre-reinforced composite tubes , 1991 .

[9]  Chang-Hsuan Chiu,et al.  Effects of Braiding Parameters on Energy Absorption Capability of Triaxially Braided Composite Tubes , 1998 .

[10]  A. Gilat,et al.  Strain Rate Sensitivity of Epoxy Resin in Tensile and Shear Loading , 2013 .

[11]  Y. Zhou,et al.  Tensile mechanical behavior of T300 and M40J fiber bundles at different strain rate , 2001 .

[12]  Michael Fisher,et al.  Enhancing Future Automotive Safety with Plastics , 2007 .

[13]  P. Beardmore,et al.  Design and Fabrication of Automotive Components in Graphite Fiber-Reinforced Composites , 1979 .

[14]  Cing-Dao Kan,et al.  Modeling, Testing, and Validation of the 2007 Chevy Silverado Finite Element Model , 2010 .

[15]  Rajiv A. Naik,et al.  Failure Analysis of Woven and Braided Fabric Reinforced Composites , 1995 .

[16]  Lynette W. Cheah,et al.  Cars on a diet : the material and energy impacts of passenger vehicle weight reduction in the U.S. , 2010 .

[17]  Chang-Hsuan Chiu,et al.  Crushing Characteristics of 3-D Braided Composite Square Tubes , 1997 .

[18]  Kalyan Sehanobish,et al.  Engineering Plastics and Plastic Composites in Automotive Applications , 2009 .

[19]  Daniel O. Adams,et al.  Crash Safety Assurance Strategies For Future Plastic and Composite Intensive Vehicles (PCIVs) , 2010 .

[20]  P. Beardmore,et al.  The potential for composites in structural automotive applications , 1986 .

[21]  William T. Hollowell,et al.  NHTSA'S RESEARCH PROGRAM FOR VEHICLE COMPATIBILITY , 2003 .

[22]  Guy S. Nusholtz,et al.  Vehicle Mass, Stiffness and Their Relationship , 2005 .

[23]  Michael M. Fisher,et al.  APC Vision and Technology Roadmap for the Automotive Market-Defining Priority Research for Plastics in 21st Century Vehicles , 2002 .

[24]  Wayne Wojciechowski,et al.  Committee Reports , 1975, Proceedings of the ASIL Annual Meeting.

[25]  Aviva Brecher,et al.  A Safety Roadmap for Future Plastics and Composites Intensive Vehicles , 2007 .

[26]  Z. Hashin.  Failure Criteria for Unidirectional Fiber Composites , 1980 .

[27]  P. H. Thornton,et al.  Crash energy management in composite automotive structures , 1988 .

[28]  R Inai,et al.  Experimental investigation on the crushing properties of carbon fibre braided composite tubes , 2003 .

[29]  Robert L. Taylor,et al.  A constitutive model for anisotropic damage in fiber-composites , 1995 .

[30]  J. M. Starbuck,et al.  Energy Absorption in Polymer Composites for Automotive Crashworthiness , 2002 .

[31]  F. K. Chang,et al.  Energy absorption of braided composite tubes , 2000 .

[32]  Geoffrey M. Wood.  Lightweight Materials for Transportation , 1993 .

[33]  G. L. Farley,et al.  Crushing Characteristics of Continuous Fiber-Reinforced Composite Tubes , 1992 .

[34]  M. Omizo,et al.  Modeling , 1983, Encyclopedic Dictionary of Archaeology.

[35]  A D Kelkar,et al.  Characterization and Structural Behavior of Braided Composites , 2009 .

[36]  Enrico Mangino,et al.  The future use of structural composite materials in the automotive industry , 2007 .

[37]  J. J. Harwood,et al.  DESIGN AND FABRICATION OF A GrFRP CONCEPT AUTOMOBILE , 1980 .

[38]  Sanjay Patel,et al.  Characterizing and Enhancing the Safety of Future Plastic and Composite Intensive Vehicles (PCIVs) , 2009 .