Multidimensional Modeling of Spray Atomization and Air-Fuel Mixing in a Direct-Injection Spark-Ignition Engine

[1]  Rolf D. Reitz,et al.  Effects of Injection Timing on Air-Fuel Mixing in a Direct-Injection Spark-Ignition Engine , 1997 .

[2]  R. Reitz,et al.  A temperature wall function formulation for variable-density turbulent flows with application to engine convective heat transfer modeling , 1997 .

[3]  W. Anderson,et al.  Understanding the Thermodynamics of Direct Injection Spark Ignition (DISI) Combustion Systems: An Analytical and Experimental Investigation , 1996 .

[4]  Rolf D. Reitz,et al.  Modeling the Effects of Intake Flow Structures on Fuel/Air Mixing in a Direct-injected Spark-Ignition Engine , 1996 .

[5]  Paul A. Williams,et al.  Fuel Spray Characterisation within an Optically Accessed Gasoline Direct Injection Engine Using a CCD Imaging System , 1996 .

[6]  Günter Karl Fraidl,et al.  Gasoline Direct Injection: Actual Trends and Future Strategies for Injection and Combustion Systems , 1996 .

[7]  Rolf D. Reitz,et al.  Modeling fuel spray impingement and heat transfer between spray and wall in direct injection diesel engines , 1995 .

[8]  Christopher J. Rutland,et al.  Intake flow modeling in a four stroke diesel using KIVA3 , 1993 .

[9]  A. A. Amsden,et al.  KIVA3. A KIVA Program With Block-Structured Mesh for Complex Geometries , 1993 .

[10]  U. Spicher,et al.  Mixture Formation and Combustion in a Spark Ignition Engine with Direct Fuel Injection , 1992 .

[11]  Rolf D. Reltz,et al.  Modeling of HC Emissions Due to Crevice Flows in Premixed-Charge Engines , 1989 .

[12]  Rolf D. Reitz,et al.  Modeling Engine Spray/Wall Impingement , 1988 .

[13]  Arthur H. Lefebvre,et al.  Internal flow characteristics of simplex swirl atomizers , 1984 .

[14]  J. Dukowicz.  A particle-fluid numerical model for liquid sprays , 1980 .

[15]  W. R. Wade,et al.  The Ford PROCO Engine Update , 1978 .

[16]  N. Dombrowski,et al.  Aerodynamic instability and disintegration of inviscid liquid sheets , 1972, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.

[17]  A. Simko,et al.  Exhaust Emission Control by the Ford Programmed Combustion Process - PROCO , 1972 .

[18]  Rolf D. Reitz,et al.  MODELING ATOMIZATION PROCESSES OF PRESSURE-SWIRL HOLLOW-CONE FUEL SPRAYS , 1997 .

[19]  R. Reitz,et al.  Turbulence Modeling of Internal Combustion Engines Using RNG κ-ε Models , 1995 .

[20]  R. Reitz,et al.  MODELING HEAT TRANSFER TO IMPINGING FUEL SPRAYS IN DIRECT-INJECTION ENGINES , 1995 .

[21]  Peter J. O'Rourke,et al.  The TAB method for numerical calculation of spray droplet breakup , 1987 .