Additive manufacturing of CoCrFeNiMo eutectic high entropy alloy: microstructure and mechanical properties

[1]  M. Pham,et al.  Thermally activated dependence of fatigue behaviour of CrMnFeCoNi high entropy alloy fabricated by laser powder-bed fusion , 2022, Additive Manufacturing.

[2]  G. Le,et al.  Simultaneously enhanced strength-ductility of AlCoCrFeNi2.1 eutectic high-entropy alloy via additive manufacturing , 2022, Materials Science and Engineering: A.

[3]  Haifeng Wang,et al.  Mechanical and dry sliding tribological properties of CoCrNiNbx medium-entropy alloys at room temperature , 2021 .

[4]  Wenwu Zhang,et al.  Additive manufacturing of in-situ strengthened dual-phase AlCoCuFeNi high-entropy alloy by selective electron beam melting , 2021, Journal of Alloys and Compounds.

[5]  D. Raabe,et al.  Hierarchical crack buffering triples ductility in eutectic herringbone high-entropy alloys , 2021, Science.

[6]  Jincheng Wang,et al.  Remelting induced fully-equiaxed microstructures with anomalous eutectics in the additive manufactured Ni32Co30Cr10Fe10Al18 eutectic high-entropy alloy , 2021 .

[7]  F. Ren,et al.  Achieving low wear in a μ-phase reinforced high-entropy alloy and associated subsurface microstructure evolution , 2021 .

[8]  J. Schoenung,et al.  Directed energy deposition (DED) additive manufacturing: Physical characteristics, defects, challenges and applications , 2021, Materials Today.

[9]  Chunli Yang,et al.  Effect of high Fe content on the microstructure, mechanical and corrosion properties of AlCoCrFeNi high-entropy alloy coatings prepared by gas tungsten arc cladding , 2021, Surface and Coatings Technology.

[10]  Wentao Yan,et al.  Phase-field modeling of grain evolutions in additive manufacturing from nucleation, growth, to coarsening , 2021, npj Computational Materials.

[11]  Seok-Jae Lee,et al.  Mechanical properties and microstructural characteristics of non-equiatomic high entropy alloy FeMnCoCrC prepared by powder metallurgy , 2021 .

[12]  Yichao Zhu,et al.  Enabling stronger eutectic high-entropy alloys with larger ductility by 3D printed directional lamellae , 2021 .

[13]  G. Le,et al.  Influence of in-situ and ex-situ precipitations on microstructure and mechanical properties of additive manufacturing CoCrFeMnNi high-entropy alloys , 2021 .

[14]  A. K. Tieu,et al.  Investigation into reciprocating dry sliding friction and wear properties of bulk CoCrFeNiMo high entropy alloys fabricated by spark plasma sintering and subsequent cold rolling processes: Role of Mo element concentration , 2020 .

[15]  P. Liaw,et al.  Promising properties and future trend of eutectic high entropy alloys , 2020, Scripta Materialia.

[16]  B. S. Murty,et al.  Insights into micro-mechanical response and texture of the additively manufactured eutectic high entropy alloy AlCoCrFeNi2.1 , 2020, Journal of Alloys and Compounds.

[17]  Juan Xu,et al.  Microstructural evolution, mechanical and corrosion behaviors of as-annealed CoCrFeNiMo (x = 0, 0.2, 0.5, 0.8, 1) high entropy alloys , 2020 .

[18]  S. Xi,et al.  Microstructure and properties of laser cladding and CoCr2.5FeNi2Tix high-entropy alloy composite coatings , 2020 .

[19]  R. Hague,et al.  3D printing of Aluminium alloys: Additive Manufacturing of Aluminium alloys using selective laser melting , 2019, Progress in Materials Science.

[20]  C. Tasan,et al.  Natural-mixing guided design of refractory high-entropy alloys with as-cast tensile ductility , 2019, Nature Materials.

[21]  Pei Wei,et al.  Additively manufactured fine grained Ni6Cr4WFe9Ti high entropy alloys with high strength and ductility , 2019, Materials Science and Engineering: A.

[22]  Wei He,et al.  In-situ monitoring and deformation characterization by optical techniques; part I: Laser-aided direct metal deposition for additive manufacturing , 2019, Optics and Lasers in Engineering.

[23]  C. Cotruţ,et al.  Phase Evolution and Microstructure Analysis of CoCrFeNiMo High-Entropy Alloy for Electro-Spark-Deposited Coatings for Geothermal Environment , 2019, Coatings.

[24]  L. Xu,et al.  Nano oxides reinforced high-entropy alloy coatings synthesized by atmospheric plasma spraying , 2019, Materials Research Letters.

[25]  M. Bermingham,et al.  Novel cost-effective Fe-based high entropy alloys with balanced strength and ductility , 2019, Materials & Design.

[26]  A. Chiba,et al.  Mechanical and corrosion properties of CoCrFeNiTi-based high-entropy alloy additive manufactured using selective laser melting , 2019, Additive Manufacturing.

[27]  Y. C. Wu,et al.  Rare-earth high entropy alloys with hexagonal close-packed structure , 2018, Journal of Applied Physics.

[28]  T. Shun,et al.  Effects of Cr Content on Microstructure and Mechanical Properties of AlCoCrxFeNi High-Entropy Alloy , 2018, Advances in Materials Science and Engineering.

[29]  A. Kashani,et al.  Additive manufacturing (3D printing): A review of materials, methods, applications and challenges , 2018, Composites Part B: Engineering.

[30]  Hui Jiang,et al.  A new strategy to design eutectic high-entropy alloys using simple mixture method , 2018 .

[31]  Yong Zhang,et al.  Cryogenic-deformation-induced phase transformation in an FeCoCrNi high-entropy alloy , 2018 .

[32]  Yong Liu,et al.  FeCoCrNiMo high-entropy alloys prepared by powder metallurgy processing for diamond tool applications , 2018 .

[33]  Yong Liu,et al.  Microstructure and Wear Behavior of FeCoCrNiMo0.2 High Entropy Coatings Prepared by Air Plasma Spray and the High Velocity Oxy-Fuel Spray Processes , 2017 .

[34]  T. Shun,et al.  Microstructures and properties of Al0.3CoCrFeNiMnx high-entropy alloys , 2017 .

[35]  Jun Wang,et al.  Seaweed eutectic-dendritic solidification pattern in a CoCrFeNiMnPd eutectic high-entropy alloy , 2017 .

[36]  Ł. Rogal.  Semi-solid processing of the CoCrCuFeNi high entropy alloy , 2017 .

[37]  P. Liaw,et al.  Microstructure, mechanical and corrosion behaviors of AlCoCuFeNi-(Cr,Ti) high entropy alloys , 2017 .

[38]  Sheng Guo,et al.  Directly cast bulk eutectic and near-eutectic high entropy alloys with balanced strength and ductility in a wide temperature range , 2017 .

[39]  Jiesheng Han,et al.  Microstructure, mechanical properties and tribological performance of CoCrFeNi high entropy alloy matrix self-lubricating composite , 2017 .

[40]  G. Song,et al.  Effects of Different Levels of Boron on Microstructure and Hardness of CoCrFeNiAlxCu0.7Si0.1By High-Entropy Alloy Coatings by Laser Cladding , 2017 .

[41]  W. Xiong,et al.  Microstructure and Wear Behavior of Atmospheric Plasma-Sprayed AlCoCrFeNiTi High-Entropy Alloy Coating , 2016, Journal of Materials Engineering and Performance.

[42]  Qiang Wang,et al.  Designing eutectic high entropy alloys of CoCrFeNiNbx , 2016 .

[43]  Ł. Rogal,et al.  Microstructure and mechanical properties of the new Nb25Sc25Ti25Zr25 eutectic high entropy alloy , 2016 .

[44]  E. Lavernia,et al.  Effects of Co and sintering method on microstructure and mechanical behavior of a high-entropy Al0.6NiFeCrCo alloy prepared by powder metallurgy , 2015 .

[45]  B. S. Murty,et al.  Plasma-Sprayed High Entropy Alloys: Microstructure and Properties of AlCoCrFeNi and MnCoCrFeNi , 2015, Metallurgical and Materials Transactions A.

[46]  Zhiqiang Cao,et al.  Effects of Nb addition on structural evolution and properties of the CoFeNi2V0.5 high-entropy alloy , 2015 .

[47]  Huijun Kang,et al.  A Promising New Class of High-Temperature Alloys: Eutectic High-Entropy Alloys , 2014, Scientific Reports.

[48]  S. Guo,et al.  Thermally stable laser cladded CoCrCuFeNi high-entropy alloy coating with low stacking fault energy , 2014 .

[49]  A. Kuznetsov,et al.  Effect of Mn and V on structure and mechanical properties of high-entropy alloys based on CoCrFeNi system , 2014 .

[50]  K. Dahmen,et al.  Microstructures and properties of high-entropy alloys , 2014 .

[51]  J. Yeh,et al.  Phases, microstructure and mechanical properties of AlxCoCrFeNi high-entropy alloys at elevated temperatures , 2014 .

[52]  N. Fenineche,et al.  Magnetic, structural and thermal properties of the Finemet-type powders prepared by mechanical alloying , 2013 .

[53]  T. Shun,et al.  Microstructures and mechanical properties of multiprincipal component CoCrFeNiTix alloys , 2012 .

[54]  T. Shun,et al.  Microstructure and mechanical properties of multiprincipal component CoCrFeNiMox alloys , 2012 .

[55]  Hong Wu,et al.  Dry sliding tribological behavior of Zr-based bulk metallic glass , 2012 .

[56]  Yong Zhang,et al.  Prediction of high-entropy stabilized solid-solution in multi-component alloys , 2012 .

[57]  P. Liaw,et al.  Refractory high-entropy alloys , 2010 .

[58]  Huizeng Li,et al.  Microstructures and compressive properties of multicomponent AlCoCrCuFeNiMox alloys , 2010 .

[59]  H. Singer,et al.  Experimental observation and computer simulations of 3D triplet structures in diffusion limited growth of xenon crystals. , 2009, Physical review letters.

[60]  J. Kruth,et al.  Residual stresses in selective laser sintering and selective laser melting , 2006 .

[61]  Jien-Wei Yeh,et al.  Adhesive wear behavior of AlxCoCrCuFeNi high-entropy alloys as a function of aluminum content , 2006 .

[62]  J. Yeh,et al.  Microstructure and electrochemical properties of high entropy alloys—a comparison with type-304 stainless steel , 2005 .

[63]  Y. Hsu,et al.  Corrosion behavior of FeCoNiCrCux high-entropy alloys in 3.5% sodium chloride solution , 2005 .

[64]  Jien-Wei Yeh,et al.  Nanostructured nitride films of multi-element high-entropy alloys by reactive DC sputtering , 2004 .

[65]  T. Shun,et al.  Nanostructured High‐Entropy Alloys with Multiple Principal Elements: Novel Alloy Design Concepts and Outcomes , 2004 .

[66]  T. Shun,et al.  Multi‐Principal‐Element Alloys with Improved Oxidation and Wear Resistance for Thermal Spray Coating , 2004 .

[67]  Temkin,et al.  Structure formation and the morphology diagram of possible structures in two-dimensional diffusional growth. , 1996, Physical review. E, Statistical physics, plasmas, fluids, and related interdisciplinary topics.

[68]  K. Yaqoob,et al.  Design and development of CoCrFeNiTa eutectic high entropy alloys , 2021 .

[69]  Yucheng Wang,et al.  Alloying behavior and novel properties of CoCrFeNiMn high-entropy alloy fabricated by mechanical alloying and spark plasma sintering , 2015 .

[70]  W. A. Oates,et al.  Phase diagram calculation: past, present and future , 2004 .

[71]  A. Mortensen,et al.  Geometrically necessary dislocations and strain-gradient plasticity: a few critical issues , 2003 .