A low-power, high sensitivity, very low-cost light emitting diode (LED)-based device developed for low-cost sensor networks was modified with bromocresol green membrane to work as a solid-state pH sensor. In this approach, a reverse-biased LED functioning as a photodiode is coupled with a second LED configured in conventional emission mode. A simple timer circuit measures how long (in microsecond) it takes for the photocurrent generated on the detector LED to discharge its capacitance from logic 1 (+5 V) to logic 0 (+1.7 V). The entire instrument provides an inherently digital output of light intensity measurements for a few cents. A light dependent resistor (LDR) modified with similar sensor membrane was also used as a comparison method. Both the LED sensor and the LDR sensor responded to various pH buffer solutions in a similar way to obtain sigmoidal curves expected of the dye. The pKa value obtained for the sensors was found to agree with the literature value.
[1]
Jeng-Ya Yeh,et al.
Semiconductor devices: Light-emitting diodes as chemical sensors
,
2001,
Nature.
[2]
Karen Swan,et al.
The Changing Nature of Teaching and Learning in a Ubiquitous Computing Classroom
,
2005
.
[3]
Xiangqin Cui,et al.
Sensors and Actuators B
,
2003
.
[4]
B. C. Brookes,et al.
Information Sciences
,
2020,
Cognitive Skills You Need for the 21st Century.
[5]
T. S. West.
Analytical Chemistry
,
1969,
Nature.