论文信息 - Life and reliability modeling of bevel gear reductions

Life and reliability modeling of bevel gear reductions

A reliability model is presented for bevel gear reductions with either a single input pinion or dual input pinions of equal size. The dual pinions may or may not have the same power applied for the analysis. The gears may be straddle mounted or supported in a bearing quill. The reliability model is based on the Weibull distribution. The reduction's basic dynamic capacity is defined as the output torque which may be applied for one million output rotations of the bevel gear with a 90 percent probability of reduction survival.

John J. Coy | M. Savage | David G. Lewicki | C. K. Brikmanis

[1] Joseph Edward Shigley,et al. Mechanical engineering design , 1972 .

[2] John J. Coy,et al. Optimal tooth numbers for compact standard spur gear sets , 1982 .

[3] M. Savage,et al. Reliability Model for Planetary Gear Trains. , 1983 .

[4] J. J. Coy,et al. Life and reliability models for helicopter transmissions , 1982 .

[5] John J. Coy,et al. Life analysis of helical gear sets using Lundberg-Palmgren theory , 1975 .

[6] John J. Coy,et al. Dynamic Capacity and Surface Fatigue Life for Spur and Helical Gears , 1976 .

[7] Robert J. Kleckner,et al. High Speed Spherical Roller Bearing Analysis and Comparison with Experimental Performance , 1983 .

[8] Hamilton Horth Mabie,et al. Mechanisms and Dynamics of Machinery , 1963 .

[9] John J. Coy,et al. Experimental and Analytical Load-Life Relation for AISI 9310 Steel Spur Gears , 1978 .

[10] A. Palmgren,et al. Dynamic capacity of rolling bearings , 1947 .

[11] H. Saunders,et al. Mechanical Engineering Design (4th Ed.) , 1985 .

[12] J. J. Coy. Analysis of dynamic capacity of low-contact-ratio spur gears using Lundberg-Palmgren theory , 1975 .

[13] E. Buckingham. Analytical mechanics of gears , 1949 .

[14] John J. Coy,et al. An Update on the Life Analysis of Spur Gears , 1983 .

[15] H. Winter,et al. Some Factors Influencing the Pitting, Micro-Pitting (Frosted Areas) and Slow Speed Wear of Surface Hardened Gears , 1981 .