In situ temperature measurement of a notebook computer - a case study in health and usage monitoring of electronics

Reliability prediction methods do not generally account for the actual life cycle environment of electronic products, which covers their environmental, operating and usage conditions. Considering thermal loads, thermal management strategies still focus on a design for continuous operation that is often determined based on an accumulation of worst-case assumptions. Health monitoring is a method of assessing the reliability of a product in its actual application conditions. A case study in health and usage monitoring of electronic products is presented for a commercial notebook computer. Internal temperatures were dynamically monitored in situ and statistically analyzed during all phases of the life cycle, including usage, storage, and transportation. The effects of power cycles, usage history, CPU computing resources usage, and external thermal environment on peak transient thermal loads were characterized. Such monitored life cycle temperature data could be applied in a life consumption monitoring methodology, to provide damage estimation and remaining life prediction due to specific failure mechanisms influenced by temperature. These findings could contribute to the design of more sustainable, least-energy consumption thermal management solutions.

[1]  A. Bar-Cohen,et al.  Mechanical stress reduction in heat sink bond layers-a numerical feasibility study , 1999, 1999 Proceedings. 49th Electronic Components and Technology Conference (Cat. No.99CH36299).

[2]  Hiroyuki Anzai.  ALGORITHM OF THE RAINFLOW METHOD , 1992 .

[3]  Shih-Kuo Wu,et al.  Thermal Management of a Notebook Computer , 2005 .

[4]  T. Kobayashi,et al.  Thermal design of a ultra-slim notebook computer , 1998, ITherm'98. Sixth Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (Cat. No.98CH36208).

[5]  Jukka Rantala,et al.  Enhanced electronic system reliability - challenges for temperature prediction , 2002 .

[6]  H. Xie,et al.  The use of heat pipes in personal computers , 1998, ITherm'98. Sixth Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (Cat. No.98CH36208).

[7]  R. L. Webb,et al.  Heat rejection limits of air cooled plane fin heat sinks for computer cooling , 2003 .

[8]  Wei Huang,et al.  A computer-architecture approach to thermal management in computer systems: opportunities and challenges , 2004, 5th International Conference on Thermal and Mechanical Simulation and Experiments in Microelectronics and Microsystems, 2004. EuroSimE 2004. Proceedings of the.

[9]  Michael G. Pecht,et al.  The IEEE standards on reliability program and reliability prediction methods for electronic equipment , 2002, Microelectron. Reliab..

[10]  S. Bosworth,et al.  Exceptional performance from the development, qualification and implementation of a silicone adhesive for bonding heatsinks to semiconductor packages , 1994, 1994 Proceedings. 44th Electronic Components and Technology Conference.

[11]  M. Pecht,et al.  APPLICATIONS OF IN-SITU HEALTH-MONITORING AND PROGNOSTIC SENSORS , 2004 .

[12]  K. Ramakrishna,et al.  Prediction of effect of heat sink adhesive on mechanical reliability of a wire bonded plastic ball grid array package , 2002, ITherm 2002. Eighth Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (Cat. No.02CH37258).

[13]  M.S.J. Hashmi,et al.  Numerical prediction of electronic component operational temperature: a perspective , 2004, IEEE Transactions on Components and Packaging Technologies.

[14]  Michael Pecht,et al.  A life consumption monitoring methodology for electronic systems , 2003 .

[15]  Richard M. Wetzel.  Fatigue under complex loading : analyses and experiments , 1977 .

[16]  Clemens J. M. Lasance.  The European project PROFIT: prediction of temperature gradients influencing the quality of electronic products , 2001, Seventeenth Annual IEEE Semiconductor Thermal Measurement and Management Symposium (Cat. No.01CH37189).

[17]  A. Bar-Cohen,et al.  Least-energy optimization of air-cooled heat sinks for sustainable development , 2003 .

[18]  Michael Pechta,et al.  The IEEE standards on reliability program and reliability prediction methods for electronic equipment , 2002 .

[19]  Satchidanand Mishra,et al.  REMAINING LIFE PREDICTION OF ELECTRONIC PRODUCTS USING LIFE CONSUMPTION MONITORING APPROACH , 2002 .

[20]  Michael G. Pecht,et al.  Load characterization during transportation , 2004, Microelectron. Reliab..

[21]  Valerie Eveloy,et al.  An Experimental Assessment of Numerical Predictive Accuracy for Electronic Component Heat Transfer in Forced Convection—Part I: Experimental Methods and Numerical Modeling , 2003 .

[22]  A. Bar-Cohen,et al.  Experimental modeling of the passive cooling limit of notebook computers , 2002, ITherm 2002. Eighth Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (Cat. No.02CH37258).

[23]  P. Rodgers,et al.  Reliability of pressure-sensitive adhesive tapes for heat sink attachment in air-cooled electronic assemblies , 2004, IEEE Transactions on Device and Materials Reliability.

[24]  W. Z. Black,et al.  Thermal management of a laptop computer with synthetic air microjets , 1998, ITherm'98. Sixth Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (Cat. No.98CH36208).

[25]  Sidharth,et al.  Board level solder reliability versus ramp rate and dwell time during temperature cycling , 2003 .

[26]  Abhijit Dasgupta,et al.  Micro-Mechanics of Creep-Fatigue Damage in PB-SN Solder Due to Thermal Cycling—Part II: Mechanistic Insights and Cyclic Durability Predictions From Monotonic Data , 2002 .

[27]  Yuji Saito,et al.  Advanced cooling system using miniature heat pipes in mobile PC , 2000 .

[28]  K. Skadron.  The importance of computer architecture in microprocessor thermal design , 2004, The Ninth Intersociety Conference on Thermal and Thermomechanical Phenomena In Electronic Systems (IEEE Cat. No.04CH37543).

[29]  V. Manno,et al.  Characterization of laminar jet impingement cooling in portable computer applications , 2002 .

[30]  R.K. Kirschman,et al.  Low-temperature electronics , 1990, IEEE Circuits and Devices Magazine.

[31]  J. R. Guarino,et al.  Characterization of laminar jet impingement cooling in portable computer application , 2001, Seventeenth Annual IEEE Semiconductor Thermal Measurement and Management Symposium (Cat. No.01CH37189).

[32]  A. Bar-Cohen,et al.  Thermal management of portable electronic equipment using thermoelectric energy conversion , 2004, The Ninth Intersociety Conference on Thermal and Thermomechanical Phenomena In Electronic Systems (IEEE Cat. No.04CH37543).