Analysis of effect of spoofing signal in GPS receiver

In this paper, we analyze the effect of error of code tracking and frequency tracking according to the chip delay of spoofing signal through the simulation. Firstly, we investigate the type of spoofing signal and defense technical of spoofing attack. For simulation, we generated the intermediate spoofing signal using the software GNSS signal generator simulator(SGGS), the intermediate spoofers synchronize its counterfeit GPS signals with the current broadcast GPS signals. The software GPS receiver simulator(SGRS) received the spoofing signal and normal signal from SGGS, and process the signals. In paper, we can check that the DLL and PLL tracking loop error are generated and pseudo-range is changed non-linear according to chip delay of spoofing signal when the spoofing signal is entered. As a result, we can check that navigation solution is incorrectly affected by spoofing signal.

[1]  Brent M. Ledvina,et al.  An In-Line Anti-Spoofing Device for Legacy Civil GPS Receivers , 2010 .

[2]  Hyo-Jik Lee,et al.  The assessment of remote accessibility for processing equipment using the graphic simulator , 2012, 2012 12th International Conference on Control, Automation and Systems.

[3]  Beatrice Motella,et al.  Detection of spoofed GPS signals at code and carrier tracking level , 2010, 2010 5th ESA Workshop on Satellite Navigation Technologies and European Workshop on GNSS Signals and Signal Processing (NAVITEC).

[4]  Hyun Min Do,et al.  Study on the requirements of joint torque sensors considering mechanical condition of the joint mechanism of a manipulator , 2012, 2012 12th International Conference on Control, Automation and Systems.

[5]  L. Scott,et al.  Anti-Spoofing & Authenticated Signal Architectures for Civil Navigation Systems , 2003 .

[6]  Jae-Hoon Kim,et al.  GPS L5 Acquisition Schemes for Fast Code Detection and Improved Doppler Accuracy , 2010 .