Validation of a CFD model with a synchronized triple‐lidar system in the wind turbine induction zone

A novel validation methodology allows verifying a CFD model over the entire wind turbine induction zone using measurements from three synchronized lidars. The validation procedure relies on spatially discretizing the probability density function of the measured free-stream wind speed. The resulting distributions are reproduced numerically by weighting steady-state Reynolds averaged Navier-Stokes simulations accordingly. The only input varying between these computations is the velocity at the inlet boundary. The rotor is modelled using an actuator disc. So as to compare lidar and simulations, the spatial and temporal uncertainty of the measurements is quantified and propagated through the data processing. For all velocity components the maximal difference between measurements and model are below 4.5% relative to the average wind speed for most of the validation space. This applies to both mean and standard deviation. One rotor radius upstream the difference reaches maximally 1.3% for the axial component. Copyright © 2017 John Wiley & Sons, Ltd.

[1]  Niels N. Sørensen,et al.  Comparison of wind turbine wake properties in non‐sheared inflow predicted by different computational fluid dynamics rotor models , 2015 .

[2]  Paul van der Laan,et al.  Verification and validation of an actuator disc model , 2014 .

[3]  Torben Mikkelsen,et al.  Precision and shortcomings of yaw error estimation using spinner-based light detection and ranging , 2013 .

[4]  Andrew Quinn,et al.  Modelling the dispersion of aerial pollutants from agricultural buildings — an evaluation of computational fluid dynamics (CFD) , 2001 .

[5]  N. Troldborg,et al.  A finite difference approach to despiking in-stationary velocity data - tested on a triple-lidar , 2016 .

[6]  Jakob Mann,et al.  Direct measurement of the spectral transfer function of a laser based anemometer. , 2012, The Review of scientific instruments.

[7]  B. P. Leonard,et al.  A stable and accurate convective modelling procedure based on quadratic upstream interpolation , 1990 .

[8]  Torben Mikkelsen,et al.  Challenges in noise removal from Doppler spectra acquired by a continuous-wave lidar , 2012 .

[9]  Alan Wright,et al.  Field Testing of Feedforward Collective Pitch Control on the CART2 Using a Nacelle-Based Lidar Scanner , 2014 .

[10]  N. Troldborg,et al.  A consistent method for finite volume discretization of body forces on collocated grids applied to flow through an actuator disk , 2015 .

[11]  Kevin Howard,et al.  Upwind preview to a horizontal axis wind turbine: a wind tunnel and field-scale study , 2016 .

[12]  Niels N. Sørensen,et al.  General purpose flow solver applied to flow over hills , 1995 .

[13]  N. Troldborg,et al.  An improved k‐ ϵ model applied to a wind turbine wake in atmospheric turbulence , 2015 .

[14]  Ioannis Antoniou,et al.  Power curve measurement with a nacelle mounted lidar , 2013 .

[15]  F. Menter.  ZONAL TWO EQUATION k-w TURBULENCE MODELS FOR AERODYNAMIC FLOWS , 1993 .

[16]  Niels Troldborg,et al.  The effect of blockage on power production for laterally aligned wind turbines , 2015 .

[17]  Wei Tang.  APPLICATION OF CFD SIMULATIONS FOR SHORT-RANGE ATMOSPHERIC DISPERSION OVER OPEN FIELDS AND WITHIN ARRAYS OF BUILDINGS , 2005 .

[18]  Erik Lundtang Petersen,et al.  The European Wind Atlas , 1985 .

[19]  Kurt Schaldemose Hansen,et al.  Online wind turbine measurement laboratory , 2006 .

[20]  Andrea Vignaroli.  UniTTe – MC1 - Nordtank Measurement Campaign (Turbine and Met Masts) , 2016 .

[21]  Niels N. Sørensen,et al.  A discrete force allocation algorithm for modelling wind turbines in computational fluid dynamics , 2012 .

[22]  Stefan Ivanell,et al.  The upstream flow of a wind turbine: blockage effect , 2011 .

[23]  Sten T. Frandsen,et al.  Thrust and wake of a wind turbine : Relationship and measurements , 2006 .

[24]  D. Spalding,et al.  A calculation procedure for heat, mass and momentum transfer in three-dimensional parabolic flows , 1972 .

[25]  Nikolas Angelou,et al.  Characterization of wind velocities in the upstream induction zone of a wind turbine using scanning continuous-wave lidars , 2016 .