Primary stability of an anatomical cementless hip stem: a statistical analysis.

The primary stability that the surgeon can achieve during surgery is a determinant of the clinical success of cementless implants. Thus, estimating what level of primary stability can be obtained with a new design is an important aspect of pre-clinical evaluation. The primary stability of a cementless hip stem is not only affected by the implant design, but also by other factors such as the mechanical quality of the host bone, the presence of gaps around the bone-implant interface, the body weight of the patient, and the size of the implant. Even the most extensive experimental study can only explore a small sub-set of all possible combinations found in vivo. To overcome this limitation, we propose a combination of experimental and numerical methods. The primary stability of a cementless anatomical stem is assessed in vitro. A finite element model is developed to accurately replicate the same experiment. The model is then parameterised over the various factors that affect the primary stability, and used in a Monte Carlo scheme to assess the primary stability over a simulated population. In this study, the method was used to investigate the mechanical stability of an anatomical cementless stem over more than 1000 simulated cases. Twenty cases were found macroscopically unstable, due to a combination of unfavourable conditions. The rest of the Monte Carlo sample showed on average a peak micromotion under stair climbing loading of 206 +/- 159 microm. The proposed method can be used to evaluate new designs in conditions more representative of the variability in clinical practice.

[1]  L Cristofolini,et al.  Methods for quantitative analysis of the primary stability in uncemented hip prostheses. , 1999, Artificial organs.

[2]  J. M. Lee,et al.  Observations on the Effect of Movement on Bone Ingrowth into Porous‐Surfaced Implants , 1986, Clinical orthopaedics and related research.

[3]  W. Harris,et al.  Differences in stiffness of the interface between a cementless porous implant and cancellous bone in vivo in dogs due to varying amounts of implant motion. , 1996, The Journal of arthroplasty.

[4]  K. Radermacher,et al.  Critical evaluation of known bone material properties to realize anisotropic FE-simulation of the proximal femur. , 2000, Journal of biomechanics.

[5]  A. Lundberg,et al.  Subsidence of porous coated noncemented femoral components in total hip arthroplasty. A roentgen stereophotogrammetric analysis. , 1992, The Journal of arthroplasty.

[6]  C. Bünger,et al.  Hydroxyapatite coating converts fibrous tissue to bone around loaded implants. , 1993, The Journal of bone and joint surgery. British volume.

[7]  C. Engh,et al.  Mechanical evaluation of cadaver retrieval specimens of cementless bone-ingrown total hip arthroplasty femoral components. , 1993, The Journal of arthroplasty.

[8]  M. Viceconti,et al.  Even a thin layer of soft tissue may compromise the primary stability of cementless hip stems. , 2001, Clinical biomechanics.

[9]  D. W. Bühler,et al.  Three-dimensional primary stability of cementless femoral stems. , 1997, Clinical biomechanics.

[10]  T P Harrigan,et al.  A finite element study of the effect of diametral interface gaps on the contact areas and pressures in uncemented cylindrical femoral total hip components. , 1991, Journal of biomechanics.

[11]  C. Bünger,et al.  Tissue ingrowth into titanium and hydroxyapatite‐coated implants during stable and unstable mechanical conditions , 1992, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[12]  A. Cappello,et al.  Accuracy and repeatability of cementless total hip replacement surgery in patients with deformed anatomies , 2003, Medical informatics and the Internet in medicine.

[13]  F. Traina,et al.  Effect of the initial implant fitting on the predicted secondary stability of a cementless stem , 2004, Medical and Biological Engineering and Computing.

[14]  Marco Viceconti,et al.  The primary stability of a cementless stem varies between subjects as much as between activities. , 2003, Journal of biomechanics.

[15]  C. Bünger,et al.  Hydroxyapatite coating enhances fixation of porous coated implants. A comparison in dogs between press fit and noninterference fit. , 1990, Acta orthopaedica Scandinavica.

[16]  Lutz Claes,et al.  Primary stability in cementless femoral stems: custom-made versus conventional femoral prosthesis. , 2002, Clinical biomechanics.

[17]  W. Maloney,et al.  Biomechanical and histologic investigation of cemented total hip arthroplasties. A study of autopsy-retrieved femurs after in vivo cycling. , 1989, Clinical orthopaedics and related research.

[18]  W H Harris,et al.  Micromotion of cemented and uncemented femoral components. , 1991, The Journal of bone and joint surgery. British volume.

[19]  A Rohlmann,et al.  Is staircase walking a risk for the fixation of hip implants? , 1995, Journal of biomechanics.

[20]  A Giunti,et al.  Cementless hip arthroplasty with a modular neck. , 2001, La Chirurgia degli organi di movimento.

[21]  A. Owen.  A Central Limit Theorem for Latin Hypercube Sampling , 1992 .

[22]  T W Phillips,et al.  Loosening of cementless femoral stems: a biomechanical analysis of immediate fixation with loading vertical, femur horizontal. , 1991, Journal of biomechanics.

[23]  Marco Viceconti,et al.  Validation of two algorithms to evaluate the interface between bone and orthopaedic implants , 2004, Comput. Methods Programs Biomed..

[24]  H. Amstutz,et al.  "Modes of failure" of cemented stem-type femoral components: a radiographic analysis of loosening. , 1979, Clinical orthopaedics and related research.

[25]  Michael A. Sutton,et al.  Towards the standardization of in vitro load transfer investigations of hip prostheses , 1999 .

[26]  S Stea,et al.  Registration of hip prostheses at the Rizzoli institute: 11 years' experience , 2002, Acta orthopaedica Scandinavica. Supplementum.

[27]  L Cristofolini,et al.  Initial stability of a new hybrid fixation hip stem: experimental measurement of implant-bone micromotion under torsional load in comparison with cemented and cementless stems. , 2000, Journal of biomedical materials research.

[28]  T. Keller.  Predicting the compressive mechanical behavior of bone. , 1994, Journal of biomechanics.

[29]  T P Harrigan,et al.  Fit of the uncemented femoral component and the use of cement influence the strain transfer to the femoral cortex , 1994, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[30]  P S Walker,et al.  Strains and micromotions of press-fit femoral stem prostheses. , 1987, Journal of biomechanics.

[31]  L Cristofolini,et al.  In vitro testing of the primary stability of the VerSys enhanced taper stem: A comparative study in intact and intraoperatively cracked femora , 2001, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

[32]  L Cristofolini,et al.  Pre-clinical validation of a new partially cemented femoral prosthesis by synergetic use of numerical and experimental methods. , 2001, Journal of biomechanics.

[33]  L Cristofolini,et al.  Initial stability of uncemented hip stems: an in-vitro protocol to measure torsional interface motion. , 1995, Medical engineering & physics.

[34]  G Selvik,et al.  In vivo measurements of relative motion between an uncemented femoral total hip component and the femur by roentgen stereophotogrammetric analysis. , 1991, Clinical orthopaedics and related research.

[35]  L Cristofolini,et al.  Large-sliding contact elements accurately predict levels of bone-implant micromotion relevant to osseointegration. , 2000, Journal of biomechanics.

[36]  C. Bünger,et al.  Hydroxyapatite coating modifies implant membrane formation. Controlled micromotion studied in dogs. , 1992, Acta orthopaedica Scandinavica.

[37]  Paula A. Whitlock,et al.  Monte Carlo methods. Vol. 1: basics , 1986 .

[38]  Marco Viceconti,et al.  The role of parameter identification in finite element contact analyses with reference to orthopaedic biomechanics applications. , 2002, Journal of biomechanics.

[39]  G. Beaupré,et al.  Osseointegration of total hip arthroplasties: studies in humans and animals. , 1999, Journal of long-term effects of medical implants.