Analog/RF physical layer issues for UWB systems

Ultra-wideband communications systems offer unique challenges and opportunities for RF circuit design. Proper understanding of the trade-offs that system specifications impose upon the circuit designer is essential in optimizing a system for UWB. The defining attribute of UWB is the wide fractional bandwidth of the signal. This wide bandwidth can be achieved in several ways: with carrierless systems, with a wide-bandwidth single carrier spread-spectrum system, with a multi-carrier system such as OFDM, via frequency hopping, or via some combination of these methods. This paper provides detailed impact analysis of wide fractional bandwidth on RF frontend circuits and examines the various tradeoffs. In particular, wide-bandwidth channels limit the instantaneous Q allowable in the signal path. This requires modifications of the traditional narrowband design methods. Some of the issues discussed in this paper include: issues of broadbanding, power impact, fast hopping tradeoffs, power amplifier, and antenna issues.

[1]  Behzad Razavi,et al.  CMOS technology characterization for analog and RF design , 1998, Proceedings of the IEEE 1998 Custom Integrated Circuits Conference (Cat. No.98CH36143).

[2]  Behzad Razavi,et al.  RF Microelectronics , 1997 .

[3]  Ebrahim Saberinia,et al.  Single and multi-carrier UWB communications , 2003, Seventh International Symposium on Signal Processing and Its Applications, 2003. Proceedings..

[4]  John L. Volakis,et al.  Phase linearization of a broad-band antenna response in time domain , 1982 .

[5]  Liang C. Shen,et al.  The cylindrical antenna with nonreflecting resistive loading , 1965 .

[6]  Georgios B. Giannakis,et al.  All-digital PAM impulse radio for multiple-access through frequency-selective multipath , 2000, Globecom '00 - IEEE. Global Telecommunications Conference. Conference Record (Cat. No.00CH37137).

[7]  Peter M. Asbeck,et al.  RF and Microwave Power Amplifier and Transmitter Technologies — Part 2 , 2003 .

[8]  J. Landt,et al.  Short-pulse characteristics of the conical spiral antenna , 1977 .

[9]  M. Kanda,et al.  A relatively short cylindrical broadband antenna with tapered resistive loading for picosecond pulse measurements , 1977 .

[10]  A. Attiya,et al.  Time domain characterization of receiving TEM horn antennas , 2003, IEEE Antennas and Propagation Society International Symposium. Digest. Held in conjunction with: USNC/CNC/URSI North American Radio Sci. Meeting (Cat. No.03CH37450).

[11]  Robert B. Ash,et al.  Information Theory , 2020, The SAGE International Encyclopedia of Mass Media and Society.

[12]  M. Kanda,et al.  Time domain sensors for radiated impulsive measurements , 1983 .

[13]  Moe Z. Win,et al.  Impulse radio: how it works , 1998, IEEE Communications Letters.

[14]  Thomas H. Lee,et al.  The Design of CMOS Radio-Frequency Integrated Circuits: RF CIRCUITS THROUGH THE AGES , 2003 .

[15]  G.F. Ross,et al.  Time-domain electromagnetics and its applications , 1978, Proceedings of the IEEE.

[16]  G. Franceschetti,et al.  Pulsed antennas , 1974 .

[17]  Robert J. Fontana.  Recent Applications of Ultra Wideband Radar and Communications Systems , 2000 .

[18]  David M. Pozar,et al.  The optimum feed voltage for a dipole antenna for pulse radiation , 1983 .

[19]  Tatsuo Itoh,et al.  RF technologies for low power wireless communications , 2001 .

[20]  Jeff Foerster,et al.  Ultra-Wideband Technology for Short- or Medium-Range Wireless Communications , 2001 .

[21]  R. Bates,et al.  Towards faithful radio transmission of very wide bandwidth signals , 1972 .

[22]  L. Goddard.  Information Theory , 1962, Nature.

[23]  R. Michael Buehrer,et al.  Ultra-Wideband Wireless Systems , 2005 .