Solving Three Key Problems of Wavelet Transform Processor Using Surface Acoustic Wave Devices

Abstract-In this paper, we present the bulk acoustic wave (BAW), the sound-electricity reclamation (SER), and the insertion loss as the three key problems of a wavelet transform processor using surface acoustic wave devices. The solutions to these problems are achieved in this study. The more the number of electrode pairs for the interdigital transducer (IDT) is, the weaker the excited BAW is, so the BAW can be eliminated when the number of electrode pairs for IDT is large enough. The substrate material of a small electromechanical coupling coefficient (ECC) k2 and the low-impedance load of IDT can eliminate SER. When the output ends of the wavelet transform processors are respectively connected to the amplifiers, their insertion losses can be compensated. X-112oY LiTaO3 (small ECC k2) is used as a substrate material to fabricate the wavelet transform processor.

[1]  Xiangxun Chen,et al.  Real Wavelet Transform-Based Phase Information Extraction Method: Theory and Demonstrations , 2009, IEEE Trans. Ind. Electron..

[2]  Y Sheng,et al.  Optical wavelet matched filter. , 1994, Applied optics.

[3]  Yuan Wu,et al.  Dual track architecture and time synchronous scheme for wavelet reconstruction processor using SAW device based on MSC , 2008 .

[4]  Chaitali Chakrabarti,et al.  A VLSI architecture for lifting-based forward and inverse wavelet transform , 2002, IEEE Trans. Signal Process..

[5]  Qinghong Liu,et al.  Wavelet transform element of SAW type , 2005 .

[6]  K. Hashimoto,et al.  Non-leaky, piezoelectric, quasi-shear-horizontal type SAW on X-cut LiTaO/sub 3/ , 1988, IEEE 1988 Ultrasonics Symposium Proceedings..

[7]  Qian Huang,et al.  Improving Automatic Detection of Defects in Castings by Applying Wavelet Technique , 2006, IEEE Transactions on Industrial Electronics.

[8]  Liu Junhua,et al.  Implementing wavelet transform with SAW elements , 2003 .

[9]  Liang-Gee Chen,et al.  Efficient VLSI architectures of lifting-based discrete wavelet transform by systematic design method , 2002, 2002 IEEE International Symposium on Circuits and Systems. Proceedings (Cat. No.02CH37353).

[10]  Changbao Wen,et al.  A novel architecture of implementing wavelet transform and reconstruction processor with SAW device based on MSC , 2006 .

[11]  Clemens Ruppel,et al.  Improved material constants for LiNbO/sub 3/ and LiTaO/sub 3/ , 1990, IEEE Symposium on Ultrasonics.

[12]  Hongke Xu,et al.  Optimal Frequency Band Design Scheme of Dyadic Wavelet Processor Array Using Surface Acoustic Wave Devices , 2009, IEEE Transactions on Industrial Electronics.

[13]  Mary Jane Irwin,et al.  VLSI architectures for the discrete wavelet transform , 1995 .

[14]  Damian Giaouris,et al.  Wavelet Denoising for Electric Drives , 2008, IEEE Transactions on Industrial Electronics.

[15]  Stéphane Mallat,et al.  Characterization of Signals from Multiscale Edges , 2011, IEEE Trans. Pattern Anal. Mach. Intell..

[16]  Marco Liserre,et al.  Wavelet-Based Islanding Detection in Grid-Connected PV Systems , 2009, IEEE Transactions on Industrial Electronics.

[17]  X. Zhang,et al.  Optical wavelet-matched filtering with bacteriorhodopsin films. , 1997, Applied optics.

[18]  M. Azizur Rahman,et al.  Development and Testing of Wavelet Modulation for Single-Phase Inverters , 2009, IEEE Transactions on Industrial Electronics.