Diagnosis of mechanical unbalance for double cage induction motor load in time-varying conditions based on motor vibration signature analysis
暂无分享,去创建一个
[1] R. Miceli,et al. Remote diagnosis and control of wheelchair electrical drive systems , 2004, 2004 IEEE International Conference on Industrial Technology, 2004. IEEE ICIT '04..
[2] R. Miceli,et al. Monitoring and diagnosis of failures in squirrel-cage induction motors due to cracked or broken bars , 2011, 8th IEEE Symposium on Diagnostics for Electrical Machines, Power Electronics & Drives.
[3] T. Sarkar,et al. A tutorial on wavelets from an electrical engineering perspective .2. The continuous case , 1998 .
[4] Ciro Spataro,et al. A PC-Based Wattmeter for Accurate Measurements in Sinusoidal and Distorted Conditions: Setup and Experimental Characterization , 2012, IEEE Transactions on Instrumentation and Measurement.
[5] C. F. Landy,et al. A novel method to detect broken rotor bars in squirrel cage induction motors when interbar currents are present , 2002, 2003 IEEE Power Engineering Society General Meeting (IEEE Cat. No.03CH37491).
[6] Gérard-André Capolino,et al. Advances in Diagnostic Techniques for Induction Machines , 2008, IEEE Transactions on Industrial Electronics.
[7] P. Livreri,et al. Current-sensing technique for current-mode controlled voltage regulator modules , 2008, Microelectron. J..
[8] Ciro Spataro,et al. A PC-based wattmeter for high accuracy power measurements , 2010, 2010 IEEE Instrumentation & Measurement Technology Conference Proceedings.
[9] Ciro Spataro. ADC Based Measurements:a Common Basis for the Uncertainty Estimation , 2010 .
[10] R. R. Obaid,et al. Current-based algorithm for mechanical fault detection in induction motors with arbitrary load conditions , 2003, 38th IAS Annual Meeting on Conference Record of the Industry Applications Conference, 2003..
[11] A.H. Bonnett,et al. Increased Efficiency Versus Increased Reliability , 2008, IEEE Industry Applications Magazine.
[12] W. T. Thomson,et al. On-line current monitoring to detect electrical and mechanical faults in three-phase induction motor drives , 1994 .
[13] Eduardo Cabal-Yepez,et al. Novel Methodology for Online Half-Broken-Bar Detection on Induction Motors , 2009, IEEE Transactions on Instrumentation and Measurement.
[14] Gérard-André Capolino,et al. Advanced Diagnosis of Electrical Faults in Wound-Rotor Induction Machines , 2013, IEEE Transactions on Industrial Electronics.
[15] C. Kral,et al. Detection of mechanical imbalances without frequency analysis , 2003, 4th IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives, 2003. SDEMPED 2003..
[16] A. O. Di Tommaso,et al. Voltage Source Inverters: an Easy Approach for Fast Fault Detection , 2013 .
[17] Stéphane Mallat,et al. A Theory for Multiresolution Signal Decomposition: The Wavelet Representation , 1989, IEEE Trans. Pattern Anal. Mach. Intell..
[18] Y. Gritli,et al. Vibration signature analysis for rotor broken bar diagnosis in double cage induction motor drives , 2013, 4th International Conference on Power Engineering, Energy and Electrical Drives.
[19] I. Kerszenbaum,et al. The Existence of Large Inter-Bar Currents in Three Phase Squirrel Cage Motors with Rotor-Bar And/Or End-Ring Faults , 1984, IEEE Transactions on Power Apparatus and Systems.
[20] Y. Gritli,et al. Investigation of motor current signature and vibration analysis for diagnosing rotor broken bars in double cage induction motors , 2012, International Symposium on Power Electronics Power Electronics, Electrical Drives, Automation and Motion.
[21] Ciro Spataro,et al. ADC based measurements: Identification of the parameters for the uncertainty evaluation , 2009, 2009 IEEE International Workshop on Advanced Methods for Uncertainty Estimation in Measurement.
[22] A. O. Di Tommaso,et al. Double squirrel cage induction motors: a new approach to detect rotor bar failures , 2013 .
[23] C. Kral,et al. Detection of mechanical imbalances of induction machines without spectral analysis of time-domain signals , 2004, IEEE Transactions on Industry Applications.
[24] Raviraj S. Adve,et al. A tutorial on wavelets from an electrical engineering perspective. I. Discrete wavelet techniques , 1998 .
[25] R. Miceli,et al. Test Bench Realization and Application of Specific Working Cycles for the Characterization of Wheelchair Electrical Drives , 2006, 2006 IEEE International Symposium on Industrial Electronics.
[26] Carlo Concari,et al. Differential Diagnosis Based on Multivariable Monitoring to Assess Induction Machine Rotor Conditions , 2008, IEEE Transactions on Industrial Electronics.
[27] S. Nuccio,et al. Virtual instruments: Uncertainty evaluation in the presence of unknown electromagnetic interferences , 2008, 2008 IEEE International Workshop on Advanced Methods for Uncertainty Estimation in Measurement.
[28] Y. Gritli,et al. Quantitative rotor broken bar evaluation in double squirrel cage induction machines under dynamic operating conditions , 2013, 2013 Eighth International Conference and Exhibition on Ecological Vehicles and Renewable Energies (EVER).