Deep Learning Driven Noise Reduction for Reduced Flux Computed Tomography

Deep neural networks have received considerable attention in clinical imaging, particularly with respect to the reduction of radiation risk. Lowering the radiation dose by reducing the photon flux inevitably results in the degradation of the scanned image quality. Thus, researchers have sought to exploit deep convolutional neural networks (DCNNs) to map low-quality, low-dose images to higher-dose, higher-quality images thereby minimizing the associated radiation hazard. Conversely, computed tomography (CT) measurements of geomaterials are not limited by the radiation dose. In contrast to the human body, however, geomaterials may be comprised of high-density constituents causing increased attenuation of the X-Rays. Consequently, higher dosage images are required to obtain an acceptable scan quality. The problem of prolonged acquisition times is particularly severe for micro-CT based scanning technologies. Depending on the sample size and exposure time settings, a single scan may require several hours to complete. This is of particular concern if phenomena with an exponential temperature dependency are to be elucidated. A process may happen too fast to be adequately captured by CT scanning. To address the aforementioned issues, we apply DCNNs to improve the quality of rock CT images and reduce exposure times by more than 60%, simultaneously. We highlight current results based on micro-CT derived datasets and apply transfer learning to improve DCNN results without increasing training time. The approach is applicable to any computed tomography technology. Furthermore, we contrast the performance of the DCNN trained by minimizing different loss functions such as mean squared error and structural similarity index.

[1]  Markus Bartscher,et al.  Einsatz von Computertomographie in der Reverse-Engineering-Technologie , 2006 .

[2]  Kyoung Mu Lee,et al.  Accurate Image Super-Resolution Using Very Deep Convolutional Networks , 2015, 2016 IEEE Conference on Computer Vision and Pattern Recognition (CVPR).

[3]  Sami Arica,et al.  Automatic Segmentation of Computed Tomography Images of Liver Using Watershed and Thresholding Algorithms , 2017 .

[4]  Mizuho Nishio,et al.  Convolutional auto-encoder for image denoising of ultra-low-dose CT , 2017, Heliyon.

[5]  Dominik Fleischmann,et al.  Computed tomography—old ideas and new technology , 2011, European Radiology.

[6]  Peyman Mostaghimi,et al.  Enhancing Resolution of Digital Rock Images with Super Resolution Convolutional Neural Networks , 2019, Journal of Petroleum Science and Engineering.

[7]  Jan Sijbers,et al.  Fast and flexible X-ray tomography using the ASTRA toolbox. , 2016, Optics express.

[8]  Igor Varfolomeev,et al.  An Application of Deep Neural Networks for Segmentation of Microtomographic Images of Rock Samples , 2019, Comput..

[9]  Ke Lu,et al.  Aluminum CT Image Defect Detection Based on Segmentation and Feature Extraction , 2014, HCI.

[10]  A. Kovscek,et al.  Visualization and Quantification of Thermally Induced Porosity Alteration of Immature Source Rock Using X-ray Computed Tomography , 2016 .

[11]  Abdul Ravoof Shaik,et al.  Rock Classification Based on Micro-CT Images using Machine Learning Techniques , 2019 .

[12]  A. Kovscek,et al.  Effects of Image Resolution on Sandstone Porosity and Permeability as Obtained from X-Ray Microscopy , 2018, Transport in Porous Media.

[13]  Jan Sijbers,et al.  The ASTRA Toolbox: A platform for advanced algorithm development in electron tomography. , 2015, Ultramicroscopy.

[14]  C. Berg,et al.  Industrial applications of digital rock technology , 2017, 2005.02815.

[15]  Anton du Plessis,et al.  Comparison of medical and industrial X-ray computed tomography for non-destructive testing , 2016 .

[16]  Jong-Sen Lee,et al.  Refined filtering of image noise using local statistics , 1981 .

[17]  Peyman Mostaghimi,et al.  Machine learning for predicting properties of porous media from 2d X-ray images , 2020 .

[18]  Feng Lin,et al.  Low-Dose CT With a Residual Encoder-Decoder Convolutional Neural Network , 2017, IEEE Transactions on Medical Imaging.

[19]  Manoj Kumar,et al.  A review on CT image noise and its denoising , 2018, Biomed. Signal Process. Control..

[20]  P. Noël,et al.  The evolution of image reconstruction for CT—from filtered back projection to artificial intelligence , 2018, European radiology.

[21]  Natalie N. Braun,et al.  Strategies for reducing radiation dose in CT. , 2009, Radiologic clinics of North America.

[22]  Julia F. Barrett,et al.  Artifacts in CT: recognition and avoidance. , 2004, Radiographics : a review publication of the Radiological Society of North America, Inc.

[23]  Peyman Mostaghimi,et al.  Physical Accuracy of Deep Neural Networks for 2D and 3D Multi-Mineral Segmentation of Rock micro-CT Images , 2020, ArXiv.

[24]  Andreas Frommer,et al.  Fast CG-Based Methods for Tikhonov-Phillips Regularization , 1999, SIAM J. Sci. Comput..

[25]  A. Reed,et al.  Advances in Computed Tomography for Geomaterials: GeoX 2010 , 2010 .

[26]  Martin J. Blunt,et al.  Computations of Absolute Permeability on Micro-CT Images , 2012, Mathematical Geosciences.

[27]  Tong Liu,et al.  Critical Resolution and Sample Size of Digital Rock Analysis for Unconventional Reservoirs , 2018, Energies.

[28]  Ali Kashif Bashir,et al.  Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics) , 2013, ICIRA 2013.

[29]  Aaron Marcus,et al.  Design, User Experience, and Usability. User Experience Design for Diverse Interaction Platforms and Environments , 2014, Lecture Notes in Computer Science.

[30]  Michael Schrapp,et al.  Accuracy analysis of a piece-to-piece reverse engineering workflow for a turbine foil based on multi-modal computed tomography and additive manufacturing , 2019, Precision Engineering.

[31]  Lee W Goldman,et al.  Principles of CT: Radiation Dose and Image Quality* , 2007, Journal of Nuclear Medicine Technology.

[32]  P. Gilbert Iterative methods for the three-dimensional reconstruction of an object from projections. , 1972, Journal of theoretical biology.

[33]  P. King Medical imaging systems , 1986, Proceedings of the IEEE.

[34]  Robert Schmitt,et al.  Industrial applications of computed tomography , 2014 .

[35]  Jong Chul Ye,et al.  A deep convolutional neural network using directional wavelets for low‐dose X‐ray CT reconstruction , 2016, Medical physics.

[36]  N. R. Bennett,et al.  Simultaneous in-situ measurements of gas temperature and pyrolysis of biomass smoldering via X-ray computed tomography , 2020 .

[37]  Giuseppe Papari,et al.  Fast Bilateral Filtering for Denoising Large 3D Images , 2017, IEEE Transactions on Image Processing.

[38]  Manuchehr Soleimani,et al.  TIGRE: a MATLAB-GPU toolbox for CBCT image reconstruction , 2016 .

[39]  L. Feldkamp,et al.  Practical cone-beam algorithm , 1984 .

[40]  Jacques A. de Guise,et al.  A method for modeling noise in medical images , 2004, IEEE Transactions on Medical Imaging.

[41]  Eero P. Simoncelli,et al.  Image quality assessment: from error visibility to structural similarity , 2004, IEEE Transactions on Image Processing.

[42]  I. Butler,et al.  Descriptor : An X-ray computed micro-tomography dataset for oil removal from carbonate porous media , 2019 .

[43]  A. Kovscek,et al.  An experimental platform for triaxial high-pressure/high-temperature testing of rocks using computed tomography. , 2018, The Review of scientific instruments.

[44]  Ke Li,et al.  Low-dose CT denoising with convolutional neural network , 2016, 2017 IEEE 14th International Symposium on Biomedical Imaging (ISBI 2017).

[45]  Jian Sun,et al.  Delving Deep into Rectifiers: Surpassing Human-Level Performance on ImageNet Classification , 2015, 2015 IEEE International Conference on Computer Vision (ICCV).

[46]  Jan Kautz,et al.  Loss Functions for Image Restoration With Neural Networks , 2017, IEEE Transactions on Computational Imaging.

[47]  S. Iglauer,et al.  Effect of CT image size and resolution on the accuracy of rock property estimates , 2017 .

[48]  Kees Joost Batenburg,et al.  Improving Tomographic Reconstruction from Limited Data Using Mixed-Scale Dense Convolutional Neural Networks , 2018, J. Imaging.