Design, control and implementation of a non-rare-earth flux switching permanent magnet machine

This paper presents the control and performance of the Flux Switching Permanent Magnet (FSPM) machine designed and built with non-rare-earth magnets. The design objective has been minimization of volume and cost, and reduction of cogging torque, noise and vibrations. A comprehensive methodology has been adopted for the design of a 12/10 segmented stator structure FSPM. Machine parameters have been identified with a nonlinear model taking mutual coupling and saturation into account. Stator flux oriented vector controller has been implemented using the machine parameters. Experimental results for the designed and fabricated are included for performance validation.

[1]  Z. Zhu,et al.  Winding Configurations and Optimal Stator and Rotor Pole Combination of Flux-Switching PM Brushless AC Machines , 2010, IEEE Transactions on Energy Conversion.

[2]  Toshihiko Noguchi,et al.  A New Quick-Response and High-Efficiency Control Strategy of an Induction Motor , 1986, IEEE Transactions on Industry Applications.

[3]  Pragasen Pillay,et al.  Modeling, simulation, and analysis of permanent-magnet motor drives. I. The permanent-magnet synchronous motor drive , 1989 .

[4]  Yoshitaka Iwaji,et al.  Proposal of Mathematical Models Taking into Consideration Magnetic Saturation and Cross-Coupling Effects in Permanent Magnet Synchronous Motors , 2010 .

[5]  Thomas M. Jahns,et al.  Flux-Weakening Regime Operation of an Interior Permanent-Magnet Synchronous Motor Drive , 1987, IEEE Transactions on Industry Applications.

[6]  Chandan Sikder,et al.  Design and Controller Optimization of Switched Reluctance and Flux Switching PM Machines. , 2016 .

[7]  D. Howe,et al.  Influence of design parameters on output torque of flux-switching permanent magnet machines , 2008, 2008 IEEE Vehicle Power and Propulsion Conference.

[8]  Min-Fu Hsieh,et al.  Different Arrangements for Dual-Rotor Dual-Output Radial-Flux Motors , 2010, IEEE Transactions on Industry Applications.

[9]  D. Howe,et al.  Analysis and Optimization of Back-EMF Waveform of a Novel Flux-Switching Permanent Magnet Motor , 2007, 2007 IEEE International Electric Machines & Drives Conference.

[10]  J. T. Chen,et al.  Influence of Slot Opening on Optimal Stator and Rotor Pole Combination and Electromagnetic Performance of Switched-Flux PM Brushless AC Machines , 2011, IEEE Transactions on Industry Applications.

[11]  Jian-Xin Shen,et al.  Cogging torque suppression in a permanentmagnet flux-switching integrated-starter-generator , 2010 .

[12]  Yoshitaka Iwaji,et al.  New vector controller for PM motors which modeled the cross-coupling magnetic flux saturation , 2010, The 2010 International Power Electronics Conference - ECCE ASIA -.

[13]  Z.Q. Zhu,et al.  Alternate Poles Wound Flux-Switching Permanent-Magnet Brushless AC Machines , 2010, IEEE Transactions on Industry Applications.

[14]  Iqbal Husain,et al.  Cogging torque reduction in flux-switching permanent magnet machines by rotor pole shaping , 2013 .

[15]  Iqbal Husain,et al.  Stator vibration and acoustic noise analysis of FSPM for a low-noise design , 2016, 2016 IEEE Energy Conversion Congress and Exposition (ECCE).