Experimental Investigation into the Effect of the Passive Condensation Cooling Tank Water Level in the Thermal Performance of the Passive Auxiliary Feedwater System
暂无分享,去创建一个
The passive auxiliary feedwater system (PAFS) is one of the advanced safety features adopted in the Advanced Power Reactor Plus (APR+) and is designed to completely replace a conventional, active auxiliary feedwater system. With the aim of validating the cooling and operational performance of the PAFS, a separate effect test facility, the PAFS Condensing heat removal Assessment Loop (PASCAL), was constructed by simulating a single passive condensation heat exchanger (PCHX) tube submerged in the passive condensation cooling tank (PCCT) according to the volumetric scaling methodology. During heat removal of the PAFS, the pool water in the PCCT plays a role in the ultimate heat sink of a decay heat. In this study, the effect of the PCCT water level on the cooling performance of the PAFS was experimentally investigated with the PASCAL facility. Quasi-steady-state and PCCT level decrease test cases were sequentially performed by varying the steam generator heater power from 300 to 750 kW to investigate the thermal-hydraulic behavior during the decrease of the PCCT water level. From the experimental results, it was found that the decrease of the PCCT water level enhanced evaporative heat transfer at the outer wall of the PCHX tube by reducing the degree of subcooling around the PCHX. That induced an increase of the heat removal rate by the PCHX during the transient. Thus, it can be concluded that the current design of the PCHX in the PAFS has sufficient capacity to cool down the decay heat during the whole transient of the PCCT water level decrease.
[1] Tae-Soon Kwon,et al. Thermal-Hydraulic R&Ds for the APR+ Developments in Korea , 2010 .
[2] P. Griffith,et al. Screening reactor steam/water piping systems for water hammer , 1997 .
[3] Frank S. Castellana,et al. Scaling laws for modeling nuclear reactor systems , 1979 .