Improving the performance of RET modified asphalt with the addition of polyurethane prepolymer (PUP)

[1]  T. Geçkil,et al.  Performance Properties of Asphalt Modified with Reactive Terpolymer , 2018 .

[2]  Seyfullah Keyf,et al.  The modification of bitumen with styrene–butadiene–styrene, ethylene vinyl acetate and varying the amount of reactive ethylene terpolymer , 2018 .

[3]  W. Cao,et al.  Laboratory evaluation of the effect of composite modifier on the performance of asphalt concrete mixture , 2017 .

[4]  Yiheng Xu,et al.  Influence of water-borne epoxy resin content on performance of waterborne epoxy resin compound SBR modified emulsified asphalt for tack coat , 2017 .

[5]  Z. Hossain,et al.  Changes in fractional compositions of PPA and SBS modified asphalt binders , 2017 .

[6]  Ali Behnood,et al.  Rheological properties of asphalt binders modified with styrene-butadiene-styrene (SBS), ground tire rubber (GTR), or polyphosphoric acid (PPA) , 2017 .

[7]  M. Liang,et al.  Thermo-stability and aging performance of modified asphalt with crumb rubber activated by microwave and TOR , 2017 .

[8]  Helena Janik,et al.  Development of methods improving storage stability of bitumen modified with ground tire rubber: A review , 2017 .

[9]  Weidong Huang,et al.  Study on bond properties between RAP aggregates and virgin asphalt using Binder Bond Strength test and Fourier Transform Infrared spectroscopy , 2016 .

[10]  Dongwei Cao,et al.  Study on the classical and rheological properties of castor oil-polyurethane pre polymer (C-PU) modified asphalt☆ , 2016 .

[11]  T. Mélo,et al.  Rheological studies of asphalt modified with elastomeric polymer , 2016 .

[12]  D. Bakoš,et al.  Rheology of conventional asphalt modified with SBS, Elvaloy and polyphosphoric acid , 2015 .

[13]  B. Birgisson,et al.  Polymer modification of bitumen : Advances and challenges , 2014 .

[14]  Liping Liu,et al.  Storage Stability of Asphalt Rubber at High Temperature , 2013 .

[15]  M. Abdelrahman,et al.  Effect of Crumb Rubber Modifier Dissolution on Storage Stability of Crumb Rubber–Modified Asphalt , 2013 .

[16]  P. Ahmedzade.  The investigation and comparison effects of SBS and SBS with new reactive terpolymer on the rheological properties of bitumen , 2013 .

[17]  Jie Chang,et al.  Structural investigations of toluene diisocyanate (TDI) and trimethylolpropane (TMP)-based polyurethane prepolymer , 2012 .

[18]  Meng Ling-fen.  Research on storage stability of SBS modified asphalt and test , 2012 .

[19]  Li Yin-lei.  Study on Synthesis and Properties of MDI-50 Type Polyurethane Elastomer , 2012 .

[20]  Yuhua Yi,et al.  Preparation of Polyurethane Solid Tire with Low Heat Generating , 2011 .

[21]  N. Kanabar.  COMPARISON OF ETHYLENE TERPOLYMER, STYRENE BUTADIENE, AND POLYPHOSPHORIC ACID TYPE MODIFIERS FOR ASPHALT CEMENT , 2010 .

[22]  Xu Wenjuan,et al.  Rsearch Development of Modified Asphalt , 2010 .

[23]  Zheng Dan.  Synthesis and characterization of isocyanate-terminated polyurethane prepolymer , 2009 .

[24]  O. Ismail,et al.  Polymer-Modified Bitumen Using Ethylene Terpolymers , 2007 .

[25]  Cai Li.  Study on Chemical Modification of SBS Modified Asphalt with Chemical Modifier , 2007 .

[26]  Xiao Peng.  Cross blend mechanism of SBS modified asphalt based on infrared spectra , 2005 .

[27]  B. Sairam,et al.  MODIFICATIONS OF BITUMEN BY ELASTOMER AND REACTIVE POLYMER—A COMPARATIVE STUDY , 2002 .

[28]  Sun Da.  Study of hot storage stability of SBS chemically modified asphalt , 2002 .