The Effect of Laser Nitriding on Surface Characteristics and Wear Resistance of NiTi Alloy with Low Power Fiber Laser

The laser nitriding was performed in nitrogen gas at room temperature (20 °C) and low temperature (−190 °C) by a low power fiber laser to modify the wear and abrasion resistance of NiTi alloy. The surface roughness and element composition were analyzed by roughness device and energy-dispersive X-ray spectroscopy respectively. The results of roughness show that laser treatment can change the surface roughness due to the laser remelting. The effect of laser nitriding on the microhardness, friction coefficient, and worn scars of NiTi alloy was also studied, which shows that the microhardness of the NiTi alloy increases after laser nitriding. The optical microscope and scanning electron microscope were used to characterize the surface of NiTi alloy after wear testing to observe the microstructure of worn scars. The results show that the laser nitriding with different parameters can induce a nitride layer with different thicknesses and the higher energy deposition is the key factor for the formation of the nitride layer, which can decrease the friction coefficient and reduce wear loss during the application of NiTi alloy. The improvement of wear resistance can be attributed to the hard nitriding layer.

[1]  Nikolai Kashaev,et al.  Laser shock peening on high-strength steel , 2020, SPIE/COS Photonics Asia.

[2]  A. Ostendorf,et al.  Surface modification of NiTi alloy by ultrashort pulsed laser shock peening , 2020 .

[3]  Congyuan Zeng,et al.  Laser nitriding of titanium surfaces for biomedical applications , 2020 .

[4]  Hao Zhang,et al.  Effects of laser shock peening on the corrosion behavior and biocompatibility of a nickel-titanium alloy. , 2018, Journal of biomedical materials research. Part B, Applied biomaterials.

[5]  Wenwu Zhang,et al.  Investigation of multiple laser shock peening on the mechanical property and corrosion resistance of shipbuilding 5083Al alloy under a simulated seawater environment: publisher's note. , 2018, Applied optics.

[6]  L. Li,et al.  Thermal stability, wettability and corrosion resistance of sputtered ceria films on 316 stainless steel , 2017, Applied Surface Science.

[7]  Mythili Prakasam,et al.  Biodegradable Materials and Metallic Implants—A Review , 2017, Journal of functional biomaterials.

[8]  Seunghwan Lee,et al.  Fibre laser nitriding of titanium and its alloy in open atmosphere for orthopaedic implant applications: Investigations on surface quality, microstructure and tribological properties , 2017 .

[9]  H. Man,et al.  NiTi shape memory alloy with enhanced wear performance by laser selective area nitriding for orthopaedic applications , 2017 .

[10]  H. Man,et al.  Formation of TiN Grid on NiTi by Laser Gas Nitriding for Improving Wear Resistance in Hanks' Solution , 2016 .

[11]  F. Chang,et al.  Micromachining NiTi tubes for use in medical devices by using a femtosecond laser , 2015 .

[12]  A. Lisiecki.  Titanium Matrix Composite Ti/TiN Produced by Diode Laser Gas Nitriding , 2015 .

[13]  Yan Li,et al.  Enhanced wear resistance of NiTi alloy by surface modification with Nb ion implantation , 2014, Rare Metals.

[14]  J. Otubo,et al.  Surface modification of NiTi by plasma based ion implantation for application in harsh environments , 2012 .

[15]  Yan Li,et al.  Nano-hardness, wear resistance and pseudoelasticity of hafnium implanted NiTi shape memory alloy. , 2012, Journal of the mechanical behavior of biomedical materials.

[16]  Jian Lu,et al.  Wear resistance of NiTi alloy after surface mechanical attrition treatment , 2010 .

[17]  H. Man,et al.  Laser surface microdrilling of Ti and laser gas nitrided Ti for enhancing fixation of dental implants , 2010 .

[18]  W. Cai,et al.  Formation of diamond-like carbon (DLC) film on the NiTi alloys via plasma immersion ion implantation and deposition (PIIID) for improving corrosion resistance , 2006 .

[19]  N. Zhao,et al.  Structure and wear properties of laser gas nitrided NiTi surface , 2006 .