A Compact Physics Analytical Model for Hot-Carrier Degradation

We develop and validate a fully analytical model for hot-carrier degradation based on a thorough description of the physical picture behind this reliability phenomenon. This approach captures and links carrier transport, modeling of the Si-H bond-breakage mechanisms, and simulations of the degraded devices. All quantities evaluated within the model are described by analytical expressions and time consuming TCAD simulations are therefore avoided. We show that the model can capture measured dependencies of the normalized linear drain current change on stress time with good accuracy.

[1]  V. Huard,et al.  Hot-Carrier acceleration factors for low power management in DC-AC stressed 40nm NMOS node at high temperature , 2009, 2009 IEEE International Reliability Physics Symposium.

[2]  Brower.  Dissociation kinetics of hydrogen-passivated (111) Si-SiO2 interface defects. , 1990, Physical review. B, Condensed matter.

[3]  A. Stesmans.  Revision of H2 passivation of Pb interface defects in standard (111)Si/SiO2 , 1996 .

[4]  Tibor Grasser,et al.  Interface traps density-of-states as a vital component for hot-carrier degradation modeling , 2010, Microelectronics and reliability.

[5]  M. Agostinelli,et al.  Transistor aging and reliability in 14nm tri-gate technology , 2015, 2015 IEEE International Reliability Physics Symposium.

[6]  X. Federspiel,et al.  New Hot Carrier degradation modeling reconsidering the role of EES in ultra short N-channel MOSFETs , 2013, 2013 IEEE International Reliability Physics Symposium (IRPS).

[7]  A. Tallarico,et al.  Hot-Carrier Degradation in Power LDMOS: Selective LOCOS- Versus STI-Based Architecture , 2018, IEEE Journal of the Electron Devices Society.

[8]  T. Grasser,et al.  Modeling of hot carrier degradation using a spherical harmonics expansion of the bipolar Boltzmann transport equation , 2012, 2012 International Electron Devices Meeting.

[9]  Daniel Mathiot,et al.  An advanced explicit surface potential model physically accounting for the quantization effects in deep-submicron MOSFETs , 2004 .

[10]  B. Kaczer,et al.  Hot-carrier degradation in FinFETs: Modeling, peculiarities, and impact of device topology , 2017, 2017 IEEE International Electron Devices Meeting (IEDM).

[11]  A. Subirats,et al.  Comphy - A compact-physics framework for unified modeling of BTI , 2018, Microelectron. Reliab..

[12]  Siegfried Selberherr,et al.  Accurate impact ionization model which accounts for hot and cold carrier populations , 2002 .

[13]  Karl Rupp,et al.  Modeling of hot-carrier degradation in LDMOS devices using a drift-diffusion based approach , 2015, 2015 International Conference on Simulation of Semiconductor Processes and Devices (SISPAD).

[14]  A. Stesmans.  Passivation of Pb0 and Pb1 interface defects in thermal (100) Si/SiO2 with molecular hydrogen , 1996 .

[15]  Anisur Rahman,et al.  Reliability studies of a 10nm high-performance and low-power CMOS technology featuring 3rd generation FinFET and 5th generation HK/MG , 2018, 2018 IEEE International Reliability Physics Symposium (IRPS).

[16]  Tibor Grasser,et al.  Understanding and Modeling the Temperature Behavior of Hot-Carrier Degradation in SiON nMOSFETs , 2016, IEEE Electron Device Letters.

[17]  T. Grasser,et al.  Hot-Carrier Degradation Modeling of Decananometer nMOSFETs Using the Drift-Diffusion Approach , 2017, IEEE Electron Device Letters.

[18]  Vincent Huard,et al.  General framework about defect creation at the Si∕SiO2 interface , 2009 .

[19]  Karl Rupp,et al.  Predictive Hot-Carrier Modeling of n-Channel MOSFETs , 2014, IEEE Transactions on Electron Devices.

[20]  S. Selberherr,et al.  A Physically-Based Electron Mobility Model for Silicon Device Simulation , 1998 .

[21]  Tibor Grasser,et al.  A predictive physical model for hot-carrier degradation in ultra-scaled MOSFETs , 2014, 2014 International Conference on Simulation of Semiconductor Processes and Devices (SISPAD).

[22]  Karl Rupp,et al.  Modeling of Hot-Carrier Degradation in nLDMOS Devices: Different Approaches to the Solution of the Boltzmann Transport Equation , 2015, IEEE Transactions on Electron Devices.

[23]  T. Grasser,et al.  Impact of Mixed Negative Bias Temperature Instability and Hot Carrier Stress on MOSFET Characteristics—Part II: Theory , 2019, IEEE Transactions on Electron Devices.

[24]  T. Grasser,et al.  Impact of Mixed Negative Bias Temperature Instability and Hot Carrier Stress on MOSFET Characteristics—Part I: Experimental , 2019, IEEE Transactions on Electron Devices.

[26]  Antonio Gnudi,et al.  Characterization and modeling of electrical stress degradation in STI-based integrated power devices , 2014 .

[27]  J. M. Park,et al.  Physics-Based Hot-Carrier Degradation Models , 2011 .

[28]  Tibor Grasser,et al.  Physical modeling of hot-carrier degradation for short- and long-channel MOSFETs , 2014, 2014 IEEE International Reliability Physics Symposium.

[29]  Daniel Mathiot,et al.  Accounting for quantum mechanical effects from accumulation to inversion, in a fully analytical surface-potential-based MOSFET model , 2004 .