Rapid Fabrication of Hydrogel Microstructures Using UV-Induced Projection Printing

Fabrication of hydrogel microstructures has attracted considerable attention. A large number of applications, such as fabricating tissue engineering scaffolds, delivering drugs to diseased tissue, and constructing extracellular matrix for studying cell behaviors, have been introduced. In this article, an ultraviolet (UV)-curing method based on a digital micromirror device (DMD) for fabricating poly(ethylene glycol) diacrylate (PEGDA) hydrogel microstructures was presented. By controlling UV projection in real-time using a DMD as digital dynamic mask instead of a physical mask, polymerization of the pre-polymer solution could be controlled to create custom-designed hydrogel microstructures. Arbitrary microstructures could also be fabricated within several seconds (l5 s) using a single-exposure, providing a much higher efficiency than existing methods, while also offering a high degree of flexibility and repeatability. Moreover, different cell chains, which can be used for straightforwardly and effectively studying the cell interaction, were formed by fabricated PEGDA microstructures.

[1]  Wenfeng Liang,et al.  Extracellular-controlled breast cancer cell formation and growth using non-UV patterned hydrogels via optically-induced electrokinetics. , 2014, Lab on a chip.

[2]  Sailing He,et al.  Rapid Fabrication of Complex 3D Extracellular Microenvironments by Dynamic Optical Projection Stereolithography , 2012, Advanced materials.

[3]  Bernard Nysten,et al.  Nanoscale mapping of the elasticity of microbial cells by atomic force microscopy , 2003 .

[4]  Rashid Bashir,et al.  Patterned Three‐Dimensional Encapsulation of Embryonic Stem Cells using Dielectrophoresis and Stereolithography , 2013, Advanced healthcare materials.

[5]  Ali Khademhosseini,et al.  Fabrication of three-dimensional porous cell-laden hydrogel for tissue engineering , 2010, Biofabrication.

[6]  Rashid Bashir,et al.  Three-dimensional photopatterning of hydrogels using stereolithography for long-term cell encapsulation. , 2010, Lab on a chip.

[7]  Robin H. Liu,et al.  Fabrication and characterization of hydrogel-based microvalves , 2002 .

[8]  J. Connelly,et al.  Directing cell migration using micropatterned and dynamically adhesive polymer brushes. , 2014, Acta biomaterialia.

[9]  Fanglian Yao,et al.  Poly(lactic acid)/poly(ethylene glycol) block copolymer based shell or core cross-linked micelles for controlled release of hydrophobic drug , 2015 .

[10]  Yong Chen,et al.  A Fast Mask Projection Stereolithography Process for Fabricating Digital Models in Minutes , 2012 .

[11]  Ming-Huei Cheng,et al.  The role of pore size on vascularization and tissue remodeling in PEG hydrogels. , 2011, Biomaterials.

[12]  Anthony Atala,et al.  3D bioprinting of tissues and organs , 2014, Nature Biotechnology.

[13]  Rashid Bashir,et al.  Multi-material bio-fabrication of hydrogel cantilevers and actuators with stereolithography. , 2012, Lab on a chip.

[14]  Alicia C B Allen,et al.  Multilayer microfluidic PEGDA hydrogels. , 2010, Biomaterials.

[15]  Ali Khademhosseini,et al.  A simple soft lithographic route to fabrication of poly(ethylene glycol) microstructures for protein and cell patterning. , 2004, Biomaterials.

[16]  Toshiyuki Tsuchiya,et al.  Moving mask UV lithography for three-dimensional structuring , 2007 .

[17]  Ali Khademhosseini,et al.  Fabrication of gradient hydrogels using a microfluidics/photopolymerization process. , 2004, Langmuir : the ACS journal of surfaces and colloids.

[18]  Moon-Keun Lee,et al.  Micropillar arrays enabling single microbial cell encapsulation in hydrogels. , 2014, Lab on a chip.

[19]  Shaochen Chen,et al.  Digital micromirror device projection printing system for meniscus tissue engineering. , 2013, Acta biomaterialia.

[20]  Curtis W. Frank,et al.  Photo-Cross-Linkable PNIPAAm Copolymers. 2. Effects of Constraint on Temperature and pH-Responsive Hydrogel Layers , 2003 .

[21]  Edoardo Charbon,et al.  Hybrid polymer microlens arrays with high numerical apertures fabricated using simple ink-jet printing technique , 2011 .

[22]  F. Topuz,et al.  Hydrogels in sensing applications , 2012 .

[23]  R. Bashir,et al.  Development of Miniaturized Walking Biological Machines , 2012, Scientific Reports.

[24]  Daniel J. Heath,et al.  Dynamic spatial pulse shaping via a digital micromirror device for patterned laser-induced forward transfer of solid polymer films , 2015 .

[25]  In-Hwan Lee,et al.  Exposure Time Variation Method Using DMD for Microstereolithography , 2012 .

[26]  Jiawen Li,et al.  Laser printing hierarchical structures with the aid of controlled capillary-driven self-assembly , 2015, Proceedings of the National Academy of Sciences.

[27]  Loon-Seng Tan,et al.  Direct three-dimensional microfabrication of hydrogels via two-photon lithography in aqueous solution. , 2009, Chemistry of materials : a publication of the American Chemical Society.

[28]  G. Whitesides,et al.  Soft lithography in biology and biochemistry. , 2001, Annual review of biomedical engineering.

[29]  Kinam Park,et al.  Environment-sensitive hydrogels for drug delivery. , 2001, Advanced drug delivery reviews.

[30]  G. Whitesides,et al.  Soft lithography for micro- and nanoscale patterning , 2010, Nature Protocols.

[31]  F. J. Adrian,et al.  Metal deposition from a supported metal film using an excimer laser , 1986 .

[32]  V. Yadavalli,et al.  Fabrication of poly(ethylene glycol) hydrogel microstructures using photolithography. , 2001, Langmuir : the ACS journal of surfaces and colloids.

[33]  Ali Khademhosseini,et al.  Microengineered hydrogels for tissue engineering. , 2007, Biomaterials.

[34]  P. Cywiński,et al.  Two-photon polymerization of hydrogels - versatile solutions to fabricate well-defined 3D structures , 2014 .

[35]  Lianqing Liu,et al.  Selective pattern of cancer cell accumulation and growth using UV modulating printing of hydrogels , 2015, Biomedical microdevices.

[36]  Ali Khademhosseini,et al.  Structural Reinforcement of Cell-Laden Hydrogels with Microfabricated Three Dimensional Scaffolds. , 2014, Biomaterials science.

[37]  Franck Artzner,et al.  Small Bioactivated Magnetic Quantum Dot Micelles , 2008 .

[38]  Peter W Zandstra,et al.  Efficiency of embryoid body formation and hematopoietic development from embryonic stem cells in different culture systems. , 2002, Biotechnology and bioengineering.

[39]  Seth R. Marder,et al.  Photoresponsive Hydrogel Microstructure Fabricated by Two‐Photon Initiated Polymerization , 2002 .

[40]  Jennifer L West,et al.  Flexural characterization of cell encapsulated PEGDA hydrogels with applications for tissue engineered heart valves. , 2011, Acta biomaterialia.

[41]  M Moretti,et al.  Fabrication of 3D cell-laden hydrogel microstructures through photo-mold patterning , 2013, Biofabrication.

[42]  A. Khademhosseini,et al.  Hydrogel bioprinted microchannel networks for vascularization of tissue engineering constructs. , 2014, Lab on a chip.

[43]  Ritu Raman,et al.  Photopatterning of hydrogel scaffolds coupled to filter materials using stereolithography for perfused 3D culture of hepatocytes , 2015, Biotechnology and bioengineering.

[44]  Ali Khademhosseini,et al.  Micromolding of photocrosslinkable chitosan hydrogel for spheroid microarray and co-cultures. , 2006, Biomaterials.

[45]  Ulrich S. Schubert,et al.  Reactive inkjet printing of calcium alginate hydrogel porogens—a new strategy to open-pore structured matrices with controlled geometry , 2010 .

[46]  Won-Gun Koh,et al.  Micropatterning of proteins on the surface of three-dimensional poly(ethylene glycol) hydrogel microstructures. , 2008, Analytica chimica acta.