Materials degradation in non-thermal plasma generators by corona discharge

[1]  G. Lu,et al.  Enhanced degradation of residual potassium ethyl xanthate in mineral separation wastewater by dielectric barrier discharge plasma and peroxymonosulfate , 2021, Separation and Purification Technology.

[2]  A. Lantada,et al.  Design and Experimental Evaluation of Innovative Wire-to-Plane Fins’ Configuration for Atmosphere Corona-Discharge Cooling Devices , 2020 .

[3]  T. Wen,et al.  Corona discharge characteristics of cylindrical electrodes in a two-stage electrostatic precipitator , 2020, Heliyon.

[4]  A. Sakudo,et al.  Disinfection and Sterilization Using Plasma Technology: Fundamentals and Future Perspectives for Biological Applications , 2019, International journal of molecular sciences.

[5]  I. Selivonin,et al.  Effect of electrode degradation on the electrical characteristics of surface dielectric barrier discharge , 2018, Plasma Sources Science and Technology.

[6]  S. V. Hulle,et al.  Investigation of plasma‐induced chemistry in organic solutions for enhanced electrospun PLA nanofibers , 2018 .

[7]  D. Go,et al.  Recent advances in electrohydrodynamic pumps operated by ionic winds: a review , 2017 .

[8]  Om Prakash Yadav,et al.  A literature review on planning and analysis of accelerated testing for reliability assessment , 2017, Qual. Reliab. Eng. Int..

[9]  Xiaojing Wang,et al.  Synergetic degradation of Acid Orange 7 (AO7) dye by DBD plasma and persulfate , 2017 .

[10]  A. Kasdi.  Computation and measurement of corona current density and V–I characteristics in wires-to-plates electrostatic precipitator , 2016 .

[11]  K. Cen,et al.  An experimental study on the effects of temperature and pressure on negative corona discharge in high-temperature ESPs , 2016 .

[12]  Y. Zebboudj,et al.  Investigation on the Corona Discharge in Blade-to-Plane Electrode Configuration , 2015 .

[13]  Subrata Roy,et al.  Efficient needle plasma actuators for flow control and surface cooling , 2015 .

[14]  R. Islamov,et al.  Lifetime and erosion of silver-based wire electrodes in an ultracorona in air , 2013 .

[15]  P. Pérez,et al.  On the oxidation mechanism of pure tungsten in the temperature range 600-800 C , 2012 .

[16]  J. Llorca,et al.  Mechanical properties of tungsten alloys with Y2O3 and titanium additions , 2011 .

[17]  Y. Teramoto,et al.  Effect of humidity on gas temperature in the afterglow of pulsed positive corona discharge , 2010 .

[18]  A. Petrov,et al.  Erosion of a copper cathode in a negative corona discharge , 2008 .

[19]  van Ejm Bert Heesch,et al.  Long lifetime, triggered, spark-gap switch for repetitive pulsed power applications , 2005 .

[20]  V. Puchkarev,et al.  High current density spotless vacuum arc as a glow discharge , 1996, Proceedings of 17th International Symposium on Discharges and Electrical Insulation in Vacuum.

[21]  G. Mesyats.  Ecton or electron avalanche from metal , 1995 .

[22]  R. S. Sigmond,et al.  The corona discharge, its properties and specific uses , 1985 .

[23]  Yong-Jin Kim,et al.  Particle Removal Characteristics of A High-Velocity Electrostatic Mist Eliminator , 2020 .

[24]  Jane H. Davidson,et al.  Ozone generation by indoor, electrostatic air cleaners , 1997 .